{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32053P01A1200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32053P01A1200","canonicalUrl":"https://aoctrl.com/schneider/SH32053P01A1200","factsUrl":"https://aoctrl.com/api/mcp/products/SH32053P01A1200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series three-phase servo motor, 10600 W continuous power, Hiperface SinCos absolute single-turn encoder, IP65/IP67 flange mount, order code SH32053P01A1200.","salesMarkdown":"## What the SH32053P01A1200 actually delivers Across the four common industrial supplies the motor is rated for, the continuous output moves noticeably with voltage: 4450 W at 115 V single phase, 7790 W at 230 V single phase, 10620 W at 400 V three phase, and 10100 W at 480 V three phase — meaning the same winding delivers more than twice the shaft power at 400 V as at 115 V single phase, so the drive sizing and the upstream transformer tap both matter. Nominal torque tracks the same voltage curve and drops as speed climbs: 84.9 N·m at 115 V / 500 rpm, 74.4 N·m at 230 V / 1000 rpm, 50.7 N·m at 400 V / 2000 rpm, and 40.2 N·m at 480 V / 2400 rpm — the constant-power region sits above nominal, so the drive should be rated for the kW figure at the intended bus voltage, not the low-voltage headline number. ## Mechanical envelope — peak torque, bearings, and shaft load Peak stall torque is 330 N·m across the full 115–480 V operating range, almost 3.5× the 94.4 N·m continuous stall figure, which is the headroom the drive leans on for acceleration and impact loads — sizing the drive current limit to this peak, not the nominal torque, is what keeps the motor from tripping during step transients. Maximum mechanical speed is 3800 rpm, so any application profile that targets the 2400 rpm nominal point at 480 V still has roughly 58% speed headroom; the maximum radial load on the shaft follows a derating curve of 4500 N at 1000 rpm, 3570 N at 2000 rpm, and 3120 N at 3000 rpm, with a maximum axial load of 740 N — pulley or pinion selection should be checked against the working rpm, not just the static rating. ## Flange, sealing, and panel-side integration Mounting is via international standard flange with a 205 mm motor flange, 180 mm centring collar at 4 mm depth, and four 14 mm mounting holes — this is the bolt pattern the gearbox or planetary stage has to match, not the shaft diameter, so verify the gearbox input flange before committing the BOM line. Ingress protection splits across the motor: IP65 on the motor body, IP65 on the shaft bushing, and IP67 on the housing, all to IEC 60034-5 — meaning the housing tolerates temporary immersion (splash zones, outdoor cabinets, food-and-bev washdown adjacent areas) while the shaft seal itself is only IP65, so the wet end of the installation still wants a drip shield or a sealing washer at the through-hole. ## Electrical constants for drive matching The torque constant is 2.76 N·m/A at 120 °C, so the 33.2 A continuous stall current lines up with the 94.4 N·m continuous stall torque figure; the back-EMF constant is 172 V/krpm at 20 °C, which the drive uses to set the field-weakening entry point and the over-voltage trip threshold — entering a 480 V class winding into a 400 V drive without re-checking this constant will trip on back-EMF during fast decel. Stator resistance is 0.2 Ω and stator inductance 6.3 mH, with a maximum Irms of 136.1 A — the drive's current loop bandwidth and the loop tuning profile are set against these L/R values, not the headline torque figure, so a same-family but different-frame replacement can require a full re-auto-tune rather than a parameter swap. Encoder is Absolute single turn SinCos Hiperface and the electrical interface is a straight connector — Hiperface is the Schneider/Heidenhain protocol pair, so the drive side must support Hiperface (not just Endat or SSI) and the resolver-style SinCos tracks must pass the drive's commutation-learning cycle on first commissioning.","metaTitle":"Schneider SH32053P01A1200 servo motor, 10600 W, Hiperface","metaDescription":"Schneider SH32053P01A1200 three-phase servo motor, 10.6 kW continuous, Hiperface SinCos encoder, IP65/IP67 flange, quoted to order against the BOM.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"19.3 in (489 mm)","Shaft end":"Smooth shaft","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"Without","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"190 kg.cm²","Nominal torque":"751.4 lbf.in (84.9 N.m) 115 V single phase 658.5 lbf.in (74.4 N.m) 230 V single phase 448.7 lbf.in (50.7 N.m) 400 V three phase 355.8 lbf.in (40.2 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.76 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"10600 W","Mounting Support":"International standard flange","Sizing reference":"SH32053P","Back emf constant":"172 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"2920.7 lbf.in (330 N.m) 115...480 V three phase","Stator inductance":"6.3 mH","Stator resistance":"0.2 Ohm","Maximum current Irms":"136.1 A","Nominal output power":"4450 W 115 V single phase 7790 W 230 V single phase 10620 W 400 V three phase 10100 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Straight connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"740 N","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"835.5 lbf.in (94.4 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"4500 N 1000 rpm 3570 N 2000 rpm 3120 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"33.2 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/us/en/product/SH32053P01A1200/sh3-servomotor-205mm-3-stacks-smooth-shaft-sincos-singleturn-128-no-brake-straight-ip65-67/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH32053P01A1200/alternatives.json"},"ai":{"faq":[{"question":"Is SH32053P01A1200 available via RFQ confirmation and what is the lead time for an order?","answer":"We source SH32053P01A1200 through independent distribution on a quoted-to-order basis."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32053P01A1200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32053P01A1200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}