{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32053P01A2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32053P01A2000","canonicalUrl":"https://aoctrl.com/schneider/SH32053P01A2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH32053P01A2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH32053P01A2000 SH3 series AC servo motor, three-phase, 10600 W continuous, 84.9 N.m nominal, 500 to 2400 rpm, 38 mm smooth shaft, IP65, Hiperface SinCos encoder.","salesMarkdown":"## SH3 frame, 10.6 kW continuous across 115 to 480 V The SH32053P01A2000 is a three-phase AC servo motor in the Schneider Electric SH3 sizing family, drawing on a 205 mm international-standard flange and a 38 mm smooth shaft with no holding brake. The motor flange spans 8.07 in (205 mm) with a 7.09 in (180 mm) centring collar, matching the SH32053P sizing reference printed on the device short name SH3. It is built to pair with a Lexium-series drive through the listed Hiperface SinCos absolute single-turn encoder. Continuous power is rated at 10600 W, with nominal output that swings from 4450 W at 115 V single-phase to 10620 W at 400 V three-phase and 10100 W at 480 V three-phase, so the same frame covers a wide mains condition without re-sizing. Buyers specifying against a 400 V or 480 V three-phase feed land near the top of that envelope; a 115 V single-phase supply drops the continuous capability to under half. ## Torque envelope: 40 to 330 N.m, 33.2 A continuous stall Peak stall torque reaches 2920.7 lbf.in (330 N.m) for short-duration accelerations and holds, while continuous stall torque is 835.5 lbf.in (94.4 N.m) across the 115 to 480 V range. Continuous stall current is 33.2 A, with a 3-second peak output of 136.1 A. ## Speed map: 500 to 2400 rpm across the supply range The five-pole rotor and 172 V/krpm back-EMF constant set the field-weakening ceiling the drive will command above base speed. Buyers pairing this motor with a 400 V three-phase bus — the common industrial feed — see base speed near 2000 rpm and the full continuous torque band on the constant-torque region of the curve. ## Mechanical fit: 489 mm length, 4500 N radial load Overall length is 19.3 in (489 mm) with a 3.1 in (80 mm) shaft extension, mounting on an international-standard flange with 0.6 in (14 mm) bolt holes and a 0.2 in (4 mm) centring-collar depth. The 7.09 in (180 mm) centring collar diameter and 8.07 in (205 mm) flange lock the motor into the SH3 family footprint — replacement motors must match these dimensions for a drop-in gearbox or coupling swap. Shaft end is smooth (no keyway), so coupling choice is a clamp-style or shrink-fit element rather than a keyed bore. The electrical interface is a straight connector by default, with a rotatable right-angled connector variant available on the same frame for cabinets where the cable has to leave axially rather than radially. ## Sealing, cooling, and the 130 °C copper hotspot Cooling is natural convection — no integrated fan, so the cabinet or machine housing has to carry away the 10.6 kW of continuous dissipation at rated load. The motor body carries IP65 protection per IEC 60034-5; the shaft bushing holds IP54 without a shaft seal ring and IP65 with one, so the seal choice depends on whether the application sees washdown or splash at the through-shaft. The winding hotspot rating is 266 °F (130 °C), the thermal ceiling the drive's I²t model has to honour during cyclic overload. One motor per pack, shipped as a single unit ready for cabinet integration. ## Sourcing posture for the SH32053P01A2000 Lifecycle stage reads as current on the listed record.","metaTitle":"SH32053P01A2000 Servo Motor, 10600 W, 84.9 N.m","metaDescription":"Schneider Electric SH32053P01A2000 SH3 servo motor, three-phase, 10600 W continuous, 84.9 N.m nominal torque, Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"19.3 in (489 mm)","Inertia":"0.0 kg.cm² of brake 0.0 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"Without","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"190 kg.cm²","Nominal torque":"751.4 lbf.in (84.9 N.m) 115 V single phase 658.5 lbf.in (74.4 N.m) 230 V single phase 448.7 lbf.in (50.7 N.m) 400 V three phase 355.8 lbf.in (40.2 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"10600 W","Mounting Support":"International standard flange","Sizing reference":"SH32053P","Back emf constant":"172 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"2920.7 lbf.in (330 N.m) 115...480 V three phase","Stator inductance":"6.3 mH","Stator resistance":"0.2 Ohm","Maximum current Irms":"136.1 A","Nominal output power":"4450 W 115 V single phase 7790 W 230 V single phase 10620 W 400 V three phase 10100 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"740 N","Output current 3s peak":"136.1 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"835.5 lbf.in (94.4 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"4500 N 1000 rpm 3570 N 2000 rpm 3120 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"33.2 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ca/en/product/SH32053P01A2000/sh3-servomotor-205mm-3-stacks-smooth-shaft-sincos-singleturn-128-no-brake-angular-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH32053P01A2000/alternatives.json"},"ai":{"faq":[{"question":"Where can I buy SH32053P01A2000 and how do I get a price?","answer":"SH32053P01A2000 is sourced through independent industrial-automation distribution rather than via the OEM direct channel. The path to a firm quote is an RFQ with the order code, the quantity, and the BOM position — supply is confirmed against the request at quote time. No standing-stock or same-day-ship claim is made on this listing."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32053P01A2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32053P01A2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}