{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32053P01F2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32053P01F2100","canonicalUrl":"https://aoctrl.com/schneider/SH32053P01F2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH32053P01F2100","rawCanonicalId":null},"summary":{"shortDescription":"SH32053P01F2100 three-phase servo motor, 10.6 kW continuous power, 205 mm flange, IP65, absolute single-turn SinCos Hiperface encoder, holding brake.","salesMarkdown":"## 10.6 kW continuous, 330 Nm peak — torque lives on the supply voltage The SH32053P01F2100: This SH3-series servo motor delivers 10.6 kW continuous power from a 400 V three-phase supply, but the torque curve shifts hard with the line voltage you actually have on site. At 115 V single phase you get 84.9 Nm nominal; at 480 V three phase that drops to 40.2 Nm — the motor is wound for the higher-voltage torque density, so if your cabinet feeds 480 V, you're running the derated end of the curve. Peak stall torque hits 330 Nm across the 115–480 V three-phase range, which matters for acceleration events like a press index or a rapid traverse. The holding brake locks 80 Nm — enough to keep a vertical axis from drifting when the drive is off. ## Absolute SinCos Hiperface encoder — no homing on power-up The absolute single-turn SinCos Hiperface encoder means this motor knows its shaft position the instant the drive powers up. No reference run, no limit-switch homing sequence — the controller reads the position from the encoder's internal track. That saves a few seconds per cycle on a packaging line and avoids the crash risk of a lost-home condition on a multi-axis station. The encoder is a single-turn type: it tracks position within one revolution (360° electrical). For multi-turn applications (e.g. a ball screw that travels several turns end to end), you'd need a multi-turn encoder variant — this one resets its turn count at power-off unless the drive's battery-backed multiturn option is wired in. ## IP65 motor, natural convection — no fan to fail on a washdown line IP65 per IEC 60034-5 on both the motor body and the shaft bushing means this motor handles direct washdown — food processing, beverage fill lines, outdoor conveyor exposure. The natural-convection cooling (no external fan) means one less rotating part to clog or seize in a wet environment, but it also means the continuous torque rating assumes free air around the housing; stuffing it into a tight enclosure derates the usable power. Smooth shaft, straight connector, and a rotatable right-angled electrical connection — the connector orientation can be adjusted in the field to clear the cable tray or the machine frame. The 1.5 in (38 mm) shaft diameter with a 3.1 in (80 mm) smooth length mates to standard coupling bores without a keyway. The 205 mm international standard flange (IEC 72-1) and the 180 mm centring collar mean the motor bolts directly onto standard gearbox and machine interfaces without an adapter plate. Mounting holes are 14 mm diameter on the flange — M12 bolts fit.","metaTitle":"SH32053P01F2100 servo motor, 10.6 kW, 205 mm flange, IP65","metaDescription":"SH32053P01F2100 three-phase servo motor, 10.6 kW continuous, 330 Nm peak torque, IP65, absolute encoder. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32053P01F2100","Length":"21.2 in (538.5 mm)","Inertia":"16.0 kg.cm² of brake 190.0 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 205mm, 3 stacks, smooth Shaft, SinCos Singleturn 128, Brake, angular, IP65/65","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"206 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"751.4 lbf.in (84.9 N.m) 115 V single phase 658.5 lbf.in (74.4 N.m) 230 V single phase 448.7 lbf.in (50.7 N.m) 400 V three phase 355.8 lbf.in (40.2 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"10600 W","Mounting Support":"International standard flange","Sizing reference":"SH32053P","Back emf constant":"172 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"2920.7 lbf.in (330 N.m) 115...480 V three phase","Stator inductance":"2.05 mH","Stator resistance":"0.2 Ohm","Maximum current Irms":"136.1 A","Nominal output power":"4450 W 115 V single phase 7790 W 230 V single phase 10620 W 400 V three phase 10100 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"740 N","Output current 3s peak":"136.1 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"835.5 lbf.in (94.4 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"4500 N 1000 rpm 3570 N 2000 rpm 3120 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"33.2 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$4,305.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/47841b82bf8dee72c99beea20d3bc8f8.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH32053P01F2100/sh3-servomotor-205mm-3-stacks-smooth-shaft-sincos-singleturn-128-brake-angular-ip65-65/"},"ai":{"faq":[{"question":"What is the nominal torque of SH32053P01F2100 at 400 V three-phase?","answer":"At 400 V three-phase supply, nominal torque is 50.7 Nm. At 480 V three-phase it drops to 40.2 Nm. The motor delivers highest torque at lower supply voltages: 84.9 Nm at 115 V single phase."},{"question":"What encoder type does SH32053P01F2100 use?","answer":"It uses an absolute single-turn SinCos Hiperface encoder. This provides position feedback on power-up without a homing sequence, but only within one revolution — multi-turn applications need a different encoder variant or a battery-backed multiturn option."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32053P01F2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32053P01F2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}