{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32053P02A2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32053P02A2000","canonicalUrl":"https://aoctrl.com/schneider/SH32053P02A2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH32053P02A2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH32053P02A2000 SH3 series servo motor, three-phase, 205 mm flange, 19.3 in (489 mm) length, 10600 W continuous, absolute multiturn SinCos Hiperface encoder, natural convection cooling, international standard flange mount.","salesMarkdown":"## What this motor is on the BOM The SH32053P02A2000 is an SH3-series three-phase servo motor built around a 205 mm international-standard flange and a 19.3 in (489 mm) body — sized for mid-range machine axes where a servo drive commands torque and speed rather than a simple V/Hz profile. Feedback is an absolute multiturn SinCos Hiperface encoder on a 38 mm smooth shaft, so the drive gets absolute position from power-on without a homing cycle on every restart — a meaningful difference on machines with long travels or vertical axes that cannot drift on power-up. Cooling is natural convection (no integrated fan), and the housing is IP54 at the shaft bushing without a seal ring, IP65 on the motor body, and IP65 on the shaft bushing when the seal option is fitted to IEC 60034-5 — so the standard build is suited to cabinet interiors or clean industrial cells, not outdoor or washdown duty without the seal upgrade. ## Torque, speed and the supply ladder that picks the operating point Continuous torque scales inversely with supply voltage: 751.4 lbf.in (84.9 N.m) at 115 V single-phase, 658.5 lbf.in (74.4 N.m) at 230 V single-phase, 448.7 lbf.in (50.7 N.m) at 400 V three-phase, and 355.8 lbf.in (40.2 N.m) at 480 V three-phase — the same stator delivers less continuous torque as the bus voltage climbs because the allowable current envelope is reached sooner. Continuous output power tracks the same ladder — 4450 W at 115 V single-phase, 7790 W at 230 V single-phase, 10620 W at 400 V three-phase, and 10100 W at 480 V three-phase — with the 10600 W continuous power rating sitting on the 400 V three-phase operating point as the headline figure. Peak stall torque reaches 2920.7 lbf.in (330 N.m) across the 115–480 V range, with continuous stall torque at 835.5 lbf.in (94.4 N.m) and continuous stall current of 33.2 A — the motor's overload headroom is roughly 3.5× continuous torque for short accel/decel moves, which sets the size of the drive's current limit block. ## Electrical constants the drive has to be sized against Back EMF constant of 172 V/krpm at 68 °F (20 °C) and torque constant of 2.84 N.m/A at 248 °F (120 °C) tell the drive how the motor converts current to torque and how fast it generates voltage as it spins — the drive's DC bus must stay well above the back-EMF at top speed, otherwise the current controller runs out of headroom and torque collapses. Stator resistance is 0.2 Ohm and stator inductance is 2.05 mH; maximum RMS current is 136.1 A with a 3 s peak output current also at 136.1 A — these are the figures the servo drive's current loop bandwidth and IGBT sizing are matched to. ## Mechanical interface and the loads it can carry The shaft is 1.5 in (38 mm) diameter, 3.1 in (80 mm) long, smooth (no keyway), and the centring collar is 7.09 in (180 mm) diameter by 0.2 in (4 mm) deep — a heavy-duty shaft sized for direct coupling to gearboxes, large pinions, or planetary reducers rather than a small pinion pressed on a keyed shaft. Maximum radial force Fr derates from 4500 N at 1000 rpm to 3570 N at 2000 rpm and 3120 N at 3000 rpm — pushing the motor faster than its nominal speed range pulls the allowable belt or pinion load down, and any overhung load calculation has to use the value that matches the actual operating speed, not the headline number. Electrical hook-up is via a straight connector, with a rotatable right-angled connector as the alternative — the rotatable variant exists so the cable can be dressed out at 90° to the motor axis where the cable run would otherwise foul the coupling or the machine frame. ## Production status and how the part is supplied There is no official L*-recorded successor or second source on the ledger, and no peer cross-reference on file — for BOM planning this means the SH32053P02A2000 stands as the sole coded part in this build, and a design-in should treat it as single-source until the project records a qualified alternate.","metaTitle":"SH32053P02A2000 Servo Motor, 10.6 kW, 205 mm flange","metaDescription":"SH32053P02A2000 servo motor, SH3 family, 205 mm flange, three-phase, 10600 W continuous, absolute multiturn Hiperface encoder. Quoted to order against an RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"19.3 in (489 mm)","Inertia":"0.0 kg.cm² of brake 190.0 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"Without","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"190 kg.cm²","Nominal torque":"751.4 lbf.in (84.9 N.m) 115 V single phase 658.5 lbf.in (74.4 N.m) 230 V single phase 448.7 lbf.in (50.7 N.m) 400 V three phase 355.8 lbf.in (40.2 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"10600 W","Mounting Support":"International standard flange","Sizing reference":"SH32053P","Back emf constant":"172 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"2920.7 lbf.in (330 N.m) 115...480 V three phase","Stator inductance":"2.05 mH","Stator resistance":"0.2 Ohm","Maximum current Irms":"136.1 A","Nominal output power":"4450 W 115 V single phase 7790 W 230 V single phase 10620 W 400 V three phase 10100 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"740 N","Output current 3s peak":"136.1 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"835.5 lbf.in (94.4 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"4500 N 1000 rpm 3570 N 2000 rpm 3120 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"33.2 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ie/en/product/SH32053P02A2000/sh3-servomotor-205mm-3-stacks-smooth-shaft-sincos-multiturn-128-no-brake-angular-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH32053P02A2000/alternatives.json"},"ai":{"faq":[{"question":"What supply voltage and power does the SH32053P02A2000 deliver at its rated point?","answer":"Torque at the 400 V three-phase point is 448.7 lbf.in (50.7 N.m) and nominal speed is 2000 rpm — the figure to design the machine's continuous duty cycle around."},{"question":"What encoder and shaft interface does the SH32053P02A2000 carry?","answer":"Feedback is an absolute multiturn SinCos Hiperface encoder, so position is retained through power-cycle without an external homing routine. The shaft is a smooth 1.5 in (38 mm) diameter by 3.1 in (80 mm) long — no keyway — and the centring collar is 7.09 in (180 mm) by 0.2 in (4 mm), matching an international standard flange mount."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32053P02A2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32053P02A2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}