{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32053P02A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32053P02A2200","canonicalUrl":"https://aoctrl.com/schneider/SH32053P02A2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH32053P02A2200","rawCanonicalId":null},"summary":{"shortDescription":"SH3 series servo motor, SH32053P02A2200, 10.6 kW continuous power, 330 Nm peak stall torque, IP65/IP67, absolute multiturn SinCos Hiperface encoder, smooth shaft, three-phase.","salesMarkdown":"## Motor ratings and torque delivery The SH32053P02A2200: Rated for 10.6 kW continuous power at 400 V three-phase, with nominal torque of 50.7 Nm at that voltage. Peak stall torque hits 330 Nm across the 115–480 V three-phase range — enough for aggressive acceleration in a pick-and-place or indexing axis. Continuous stall torque is 94.4 Nm at 33.2 A continuous stall current, so the motor holds position under load without overheating. The torque constant of 2.84 Nm/A at 120 °C copper gives a linear current-to-torque map for the drive tuning. ## Encoder and feedback for closed-loop control Fitted with an absolute multiturn SinCos Hiperface encoder — single-turn resolution plus 4096 turns multiturn. No homing sequence needed after a power cycle; the axis position is known on boot. The SinCos analog tracks give the drive fine velocity ripple data for low-speed smoothness. ## Environmental sealing and mounting IP65 on the motor body and shaft bushing, IP67 on the housing per IEC 60034-5. That means the motor survives washdown and airborne dust — suitable for food processing or wet machining lines. The rotatable right-angled connector lets the cable exit point be adjusted on-site without opening the housing. Mounts on an international standard flange with a 205 mm flange size and 180 mm centring collar. The smooth shaft (1.5 in diameter, 3.1 in length) accepts a keyless coupling or a clamping hub — no keyway to clock.","metaTitle":"SH32053P02A2200 servo motor, 10.6 kW, IP65, absolute encoder","metaDescription":"SH32053P02A2200 servo motor, 10.6 kW continuous, 330 Nm peak stall, IP65/IP67, absolute multiturn SinCos Hiperface encoder. Active production, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32053P02A2200","Length":"19.3 in (489 mm)","Inertia":"0.0 kg.cm² of brake 190.0 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 205mm, 3 stacks, smooth Shaft, SinCos Multiturn 128, no Brake, angular, IP65/67","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"Without","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"190 kg.cm²","Nominal torque":"751.4 lbf.in (84.9 N.m) 115 V single phase 658.5 lbf.in (74.4 N.m) 230 V single phase 448.7 lbf.in (50.7 N.m) 400 V three phase 355.8 lbf.in (40.2 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"10600 W","Mounting Support":"International standard flange","Sizing reference":"SH32053P","Back emf constant":"172 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"2920.7 lbf.in (330 N.m) 115...480 V three phase","Stator inductance":"2.05 mH","Stator resistance":"0.2 Ohm","Maximum current Irms":"136.1 A","Nominal output power":"4450 W 115 V single phase 7790 W 230 V single phase 10620 W 400 V three phase 10100 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"740 N","Output current 3s peak":"136.1 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"835.5 lbf.in (94.4 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"4500 N 1000 rpm 3570 N 2000 rpm 3120 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"33.2 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$9,940.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/47841b82bf8dee72c99beea20d3bc8f8.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH32053P02A2200/sh3-servomotor-205mm-3-stacks-smooth-shaft-sincos-multiturn-128-no-brake-angular-ip65-67/"},"ai":{"faq":[{"question":"What is the phase and length of SH32053P02A2200?","answer":"Three-phase motor with a frame length of 19.3 in (489 mm)."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32053P02A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32053P02A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}