{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32053P02F1000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32053P02F1000","canonicalUrl":"https://aoctrl.com/schneider/SH32053P02F1000","factsUrl":"https://aoctrl.com/api/mcp/products/SH32053P02F1000","rawCanonicalId":null},"summary":{"shortDescription":"Parker SH3 series servo motor, SH32053P02F1000, three-phase, 10.6 kW continuous power, 2000 rpm at 400 V three-phase, smooth shaft 1.5 in diameter x 3.1 in length, with holding brake, absolute multiturn SinCos Hiperface encoder, IP65 protection.","salesMarkdown":"## Motor ratings across supply voltages The SH32053P02F1000: This SH3 series servo motor delivers 10.6 kW continuous power at 400 V three-phase, with a nominal speed of 2000 rpm. On 480 V three-phase supply it produces 10.1 kW at 2400 rpm; on single-phase 230 V it runs 1000 rpm at 7.79 kW, and on 115 V single-phase it delivers 500 rpm at 4.45 kW. The torque output shifts with supply voltage: 84.9 N·m nominal on 115 V single-phase, 74.4 N·m on 230 V single-phase, 50.7 N·m on 400 V three-phase, and 40.2 N·m on 480 V three-phase. Peak stall torque reaches 330 N·m across the 115–480 V three-phase range, which matters for short-duration acceleration or emergency stops. ## Shaft, brake, and encoder for vertical-axis duty The 1.5 in (38 mm) smooth shaft runs 3.1 in (80 mm) long, with a maximum radial force of 4500 N at 1000 rpm, 3570 N at 2000 rpm, and 3120 N at 3000 rpm. Maximum axial force is 740 N — respect these limits when coupling to a ballscrew or timing belt. The holding brake delivers 80 N·m holding torque, enough to hold a vertical load at rest without servo current. The absolute multiturn SinCos Hiperface encoder retains position through power cycles — no homing routine needed on restart, which saves time on multi-axis gantries. ## Mounting and environmental protection The motor uses an international standard flange with 8.07 in (205 mm) flange size and 7.09 in (180 mm) centring collar. Mounting holes are 0.6 in (14 mm) diameter on a standard bolt circle — confirm the mating face dimensions before cutting the bracket. IP65 protection (conforming to IEC 60034-5) on the motor body and shaft bushing means it withstands washdown and dust ingress. The shaft bushing without seal ring is IP54 — if the application sees direct spray on the shaft exit, specify the seal ring option. ## Electrical and thermal parameters for drive setup Stator resistance is 0.2 Ω and inductance is 2.05 mH — these set the current-loop tuning gains in the servo drive. The torque constant is 2.84 N·m/A at 120 °C copper temperature, and the back-EMF constant is 172 V/krpm at 20 °C. Use these values when auto-tuning the drive's velocity and position loops.","metaTitle":"Parker SH32053P02F1000 servo motor, 10.6 kW, 2000 rpm, IP65","metaDescription":"Parker SH32053P02F1000 three-phase servo motor, 10.6 kW continuous, 2000 rpm at 400 V, with holding brake and absolute multiturn Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32053P02F1000","Length":"21.2 in (538.5 mm)","Inertia":"16.0 kg.cm² of brake 190.0 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 205mm, 3 stacks, smooth Shaft, SinCos Multiturn 128, Brake, straight, IP54/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"206 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"751.4 lbf.in (84.9 N.m) 115 V single phase 658.5 lbf.in (74.4 N.m) 230 V single phase 448.7 lbf.in (50.7 N.m) 400 V three phase 355.8 lbf.in (40.2 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"10600 W","Mounting Support":"International standard flange","Sizing reference":"SH32053P","Back emf constant":"172 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"2920.7 lbf.in (330 N.m) 115...480 V three phase","Stator inductance":"2.05 mH","Stator resistance":"0.2 Ohm","Maximum current Irms":"136.1 A","Nominal output power":"4450 W 115 V single phase 7790 W 230 V single phase 10620 W 400 V three phase 10100 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"740 N","Output current 3s peak":"136.1 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"835.5 lbf.in (94.4 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"4500 N 1000 rpm 3570 N 2000 rpm 3120 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"33.2 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$10,015.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/47841b82bf8dee72c99beea20d3bc8f8.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH32053P02F1000/sh3-servomotor-205mm-3-stacks-smooth-shaft-sincos-multiturn-128-brake-straight-ip54-65/"},"ai":{"faq":[{"question":"What is SH32053P02F1000's shaft size and type?","answer":"The shaft is 1.5 in (38 mm) diameter, 3.1 in (80 mm) long, smooth (no keyway). Maximum radial force is 4500 N at 1000 rpm; maximum axial force is 740 N. These dimensions must match the coupling bore and the load's overhung moment."},{"question":"What encoder does SH32053P02F1000 use?","answer":"It uses an absolute multiturn SinCos Hiperface encoder. This retains position through power cycles and provides high-resolution feedback for servo control — no homing sequence needed on restart."},{"question":"What is the IP rating of SH32053P02F1000?","answer":"The motor body and shaft bushing are IP65 per IEC 60034-5. The shaft bushing without seal ring is IP54. For washdown environments, confirm the seal ring is specified on the shaft exit."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32053P02F1000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32053P02F1000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}