{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32053P02F2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32053P02F2000","canonicalUrl":"https://aoctrl.com/schneider/SH32053P02F2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH32053P02F2000","rawCanonicalId":null},"summary":{"shortDescription":"SH32053P02F2000 three-phase servo motor, SH3 series, 10600 W continuous power, 330 Nm peak stall torque, 80 Nm holding brake, absolute multiturn SinCos Hiperface encoder, IP54/IP65, smooth shaft, 21.2 in length.","salesMarkdown":"## Three-phase servo motor with 330 Nm peak — torque profile across supply voltages The SH32053P02F2000 is a three-phase servo motor from the SH3 series, delivering 10600 W continuous power and a peak stall torque of 330 Nm across 115...480 V three-phase supply. Its nominal torque drops from 84.9 Nm at 115 V single-phase to 40.2 Nm at 480 V three-phase, so the supply voltage directly determines the usable torque in the application — a 480 V line gives about half the torque of a 115 V line, but at higher speed. The nominal speed range spans 500 rpm at 115 V single-phase to 2400 rpm at 480 V three-phase, making this motor suited for applications that need both low-speed torque and higher-speed throughput depending on the available line voltage. ## Absolute multiturn Hiperface encoder and holding brake — position-hold capability An absolute multiturn SinCos Hiperface encoder provides high-resolution position feedback without needing a homing cycle on power-up — critical for applications like gantry axes or rotary tables where the load position must be known immediately after a power loss. The integrated holding brake delivers 80 Nm holding torque, keeping the load stationary when the drive is disabled. This is a safety-relevant feature for vertical-axis applications where the load could drop on power loss. ## IP54/IP65 protection and natural convection cooling — environmental fit The motor carries IP54 on the shaft bushing without a shaft seal ring and IP65 on the motor body per IEC 60034-5 — the shaft bushing is the wet-end barrier, so in washdown environments the seal ring must be specified separately. The IP65 motor body itself withstands hose-directed water, suitable for food processing or outdoor conveyor lines. Cooling is by natural convection — no external fan or forced air required. This simplifies installation in enclosed spaces but means the continuous torque rating assumes free air circulation around the motor frame. The motor mounts to an international standard flange with a 205 mm flange size and 180 mm centring collar, compatible with common gearbox and machine-frame interfaces. The smooth shaft (38 mm diameter, 80 mm length) accepts standard couplings or pulleys.","metaTitle":"SH32053P02F2000 servo motor, 10600 W, 330 Nm peak, IP54/IP65","metaDescription":"SH32053P02F2000 three-phase servo motor, 10600 W continuous, 330 Nm peak stall torque, 80 Nm holding brake, absolute Hiperface encoder, IP54/IP65.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"21.2 in (538.5 mm)","Inertia":"16.0 kg.cm² of brake 0.0 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"206 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"751.4 lbf.in (84.9 N.m) 115 V single phase 658.5 lbf.in (74.4 N.m) 230 V single phase 448.7 lbf.in (50.7 N.m) 400 V three phase 355.8 lbf.in (40.2 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"10600 W","Mounting Support":"International standard flange","Sizing reference":"SH32053P","Back emf constant":"172 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"2920.7 lbf.in (330 N.m) 115...480 V three phase","Stator inductance":"6.3 mH","Stator resistance":"0.2 Ohm","Maximum current Irms":"136.1 A","Nominal output power":"4450 W 115 V single phase 7790 W 230 V single phase 10620 W 400 V three phase 10100 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"740 N","Output current 3s peak":"136.1 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"835.5 lbf.in (94.4 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"4500 N 1000 rpm 3570 N 2000 rpm 3120 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"33.2 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$6,117.59","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/47841b82bf8dee72c99beea20d3bc8f8.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH32053P02F2000/sh3-servomotor-205mm-3-stacks-smooth-shaft-sincos-multiturn-128-brake-angular-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH32053P02F2000/alternatives.json"},"ai":{"faq":[{"question":"What is the SH32053P02F2000's peak torque and how does it vary with supply voltage?","answer":"Peak stall torque is 330 Nm across 115...480 V three-phase supply. Nominal torque ranges from 84.9 Nm at 115 V single-phase down to 40.2 Nm at 480 V three-phase — the supply voltage directly sets the usable torque in the application."},{"question":"What encoder type does the SH32053P02F2000 use?","answer":"It uses an absolute multiturn SinCos Hiperface encoder, providing high-resolution position feedback without a homing cycle on power-up."},{"question":"What IP rating does the SH32053P02F2000 have?","answer":"The motor body is IP65 per IEC 60034-5, and the shaft bushing is IP54 without a shaft seal ring. For washdown environments, specify the shaft seal ring separately."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32053P02F2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32053P02F2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}