{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32053P02F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32053P02F2200","canonicalUrl":"https://aoctrl.com/schneider/SH32053P02F2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH32053P02F2200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series three-phase servo motor, 80 N.m holding torque, 205 mm flange, IP65 motor / IP67 housing, Hiperface SinCos absolute multiturn encoder, rotatable right-angle connector.","salesMarkdown":"## SH3 motor, flange size and physical envelope The SH32053P02F2200 is a member of the SH3 servo line, sized to a 205 mm motor flange with a centring collar diameter of 180 mm and a centring collar depth of 4 mm, and it drops onto an international-standard flange with 14 mm mounting holes. Overall length is 538.5 mm — the unit you receive is the long-frame SH32053P02F2200 code, not the shorter SH3 frame built on the same 205 mm flange. ## Torque envelope across the voltage ladder Holding torque is 80 N.m and continuous stall torque is 94.4 N.m across the full 115 to 480 V three-phase range, with peak stall torque rated at 330 N.m — the same shaft will deliver roughly 4× its continuous figure for short accelerations and that's what the drive's current-fold limit has to be set against. Copper-hot limit is 130 °C and cooling is natural convection only, which means cabinet airflow and a clean heatsink path are part of the rating, not optional extras. ## Speed, power and the four bus-voltage maps Nominal output power follows the same curve: 4450 W at 115 V single-phase, 7790 W at 230 V single-phase, 10620 W at 400 V three-phase, and 10100 W at 480 V three-phase. Continuous power is 10600 W on the listing. Back EMF constant is 172 V/krpm at 20 °C — useful when sizing the drive's DC-bus voltage and regen resistor, since the motor will push current back into the bus on every fast decel. Stator resistance is 0.2 Ohm and stator inductance 2.05 mH, the two numbers the drive's auto-tune loop will read on first power-up before it sets the current-loop gains. ## Feedback, sealing and shaft-side load limits The connector orientation can be rotated on install so the cable exit faces the cabinet wall rather than the coupling, which keeps the bend radius clean on tight panels. IP rating is split: IP65 on the motor body, IP65 on the shaft bushing, and IP67 on the housing, all per IEC 60034-5 — the housing seal is the wet-duty rating, the shaft bushing seal is the dust-and-splash rating, so washdown duty has to be evaluated against the shaft-seal figure, not the housing number. The motor has five poles, which matters for the drive's commutation lookup at first magnetisation.","metaTitle":"SH32053P02F2200 SH3 Servo Motor, 80 N.m, 5000 rpm","metaDescription":"Schneider SH32053P02F2200 SH3 three-phase servo motor, 80 N.m holding torque, Hiperface encoder, IP65/IP67 flange-mount. Sourced to order; quote at RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32053P02F2200","Length":"21.2 in (538.5 mm)","Inertia":"16.0 kg.cm² of brake 190.0 kg.cm² of motor","Category":"US1PC5218359","Shaft end":"Smooth shaft","description":"SH3 servomotor, 205mm, 3 stacks, smooth Shaft, SinCos Multiturn 128, Brake, angular, IP65/67","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"206 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"751.4 lbf.in (84.9 N.m) 115 V single phase 658.5 lbf.in (74.4 N.m) 230 V single phase 448.7 lbf.in (50.7 N.m) 400 V three phase 355.8 lbf.in (40.2 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"10600 W","Mounting Support":"International standard flange","Sizing reference":"SH32053P","Back emf constant":"172 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"2920.7 lbf.in (330 N.m) 115...480 V three phase","Stator inductance":"2.05 mH","Stator resistance":"0.2 Ohm","Maximum current Irms":"136.1 A","Nominal output power":"4450 W 115 V single phase 7790 W 230 V single phase 10620 W 400 V three phase 10100 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"740 N","Output current 3s peak":"136.1 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"835.5 lbf.in (94.4 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"4500 N 1000 rpm 3570 N 2000 rpm 3120 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"33.2 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$7,909.38","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/ie/en/product/SH32053P02F2200/sh3-servomotor-205mm-3-stacks-smooth-shaft-sincos-multiturn-128-brake-angular-ip65-67/"},"ai":{"faq":[{"question":"Where can I buy the SH32053P02F2200 and how do I get a price?","answer":"The SH32053P02F2200 is sourced to order through independent industrial distribution — submit the BOM line and quantity against an RFQ and we confirm availability and current pricing at quote time. We do not publish a per-unit price or a live stock figure; the quote carries the lot, lead time and traceable origin once the RFQ is in."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32053P02F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32053P02F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}