{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32053P11A1000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32053P11A1000","canonicalUrl":"https://aoctrl.com/schneider/SH32053P11A1000","factsUrl":"https://aoctrl.com/api/mcp/products/SH32053P11A1000","rawCanonicalId":null},"summary":{"shortDescription":"SH32053P11A1000 three-phase servo motor, 10600 W continuous power, 500-2400 rpm speed range, IP54/IP65 protection, absolute single-turn SinCos Hiperface encoder, natural convection cooling, international standard flange.","salesMarkdown":"## Motor ratings that drive the selection The SH32053P11A1000: This is a three-phase servo motor from the SH3 series, sized for applications needing up to 10600 W continuous power. The nominal speed depends on the supply voltage: 500 rpm on 115 V single-phase, 1000 rpm on 230 V single-phase, 2000 rpm on 400 V three-phase, and 2400 rpm on 480 V three-phase — so the drive voltage directly sets the base speed. Nominal torque also varies with supply: 751.4 lbf.in (84.9 N.m) at 115 V single-phase, 658.5 lbf.in (74.4 N.m) at 230 V single-phase, 448.7 lbf.in (50.7 N.m) at 400 V three-phase, and 355.8 lbf.in (40.2 N.m) at 480 V three-phase. The continuous stall torque is 835.5 lbf.in (94.4 N.m) across the 115-480 V three-phase range, and peak stall torque reaches 2920.7 lbf.in (330 N.m) — the overload margin for acceleration or transient loads. The motor uses natural convection cooling, so no external fan or forced air is required — the thermal budget relies on the frame and ambient airflow. Maximum continuous current Irms is 136.1 A, with a 3-second peak of the same value, which sets the drive's continuous and peak current requirements. ## Mechanical integration and environmental fit Mounting uses an international standard flange with a flange size of 8.07 in (205 mm) and a centring collar diameter of 7.09 in (180 mm) with 0.2 in (4 mm) depth. The four mounting holes are 0.6 in (14 mm) diameter — standard metric bolt pattern for this frame class. The shaft is 1.5 in (38 mm) diameter with a parallel key, key width 0.4 in (10 mm), and shaft length 3.1 in (80 mm). Overall motor length is 19.3 in (489 mm). Maximum radial force Fr is 4500 N at 1000 rpm, 3570 N at 2000 rpm, and 3120 N at 3000 rpm — important for belt-drive or overhung load applications. Maximum axial force Fa is 740 N. IP protection is IP54 at the shaft bushing without a shaft seal ring, and IP65 for the motor body and shaft bushing when the seal ring is fitted — both conforming to IEC 60034-5. The electrical connection offers a rotatable right-angled connector or a straight connector, giving cable exit flexibility in tight cabinets. ## Feedback and electrical parameters The encoder is an absolute single-turn SinCos Hiperface type — this provides position feedback at power-up without a homing cycle, and the SinCos signals give high-resolution velocity feedback to the drive. No holding brake is fitted on this variant. Stator resistance is 0.2 Ohm and stator inductance is 2.05 mH — these set the electrical time constant and influence the drive's current-loop tuning. The torque constant is 2.84 N.m/A at 248 °F (120 °C), and the back EMF constant is 172 V/krpm at 68 °F (20 °C). The motor has 5 poles.","metaTitle":"SH32053P11A1000 servo motor, 10600 W, 500-2400 rpm","metaDescription":"SH32053P11A1000 three-phase servo motor, 10600 W continuous power, 500-2400 rpm speed range, IP54/IP65 protection, absolute SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32053P11A1000","Length":"19.3 in (489 mm)","Inertia":"0.0 kg.cm² of brake 190.0 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.4 in (10 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 205mm, 3 stacks, keyed Shaft, SinCos Singleturn 128, no Brake, straight, IP54/65","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"Without","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"190 kg.cm²","Nominal torque":"751.4 lbf.in (84.9 N.m) 115 V single phase 658.5 lbf.in (74.4 N.m) 230 V single phase 448.7 lbf.in (50.7 N.m) 400 V three phase 355.8 lbf.in (40.2 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"10600 W","Mounting Support":"International standard flange","Sizing reference":"SH32053P","Back emf constant":"172 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"2920.7 lbf.in (330 N.m) 115...480 V three phase","Stator inductance":"2.05 mH","Stator resistance":"0.2 Ohm","Maximum current Irms":"136.1 A","Nominal output power":"4450 W 115 V single phase 7790 W 230 V single phase 10620 W 400 V three phase 10100 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"740 N","Output current 3s peak":"136.1 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"835.5 lbf.in (94.4 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"4500 N 1000 rpm 3570 N 2000 rpm 3120 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"33.2 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$9,515.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/47841b82bf8dee72c99beea20d3bc8f8.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH32053P11A1000/sh3-servomotor-205mm-3-stacks-keyed-shaft-sincos-singleturn-128-no-brake-straight-ip54-65/"},"ai":{"faq":[{"question":"What is SH32053P11A1000's listed phase and speed range?","answer":"It is a three-phase servo motor. The nominal speed depends on the supply voltage: 500 rpm at 115 V single-phase, 1000 rpm at 230 V single-phase, 2000 rpm at 400 V three-phase, and 2400 rpm at 480 V three-phase."},{"question":"What is the overall length and shaft size of SH32053P11A1000?","answer":"The overall length is 19.3 in (489 mm). The shaft diameter is 1.5 in (38 mm) with a parallel key, key width 0.4 in (10 mm), and shaft length 3.1 in (80 mm)."},{"question":"What IP protection and cooling does this motor have?","answer":"IP54 at the shaft bushing without a seal ring, IP65 for the motor body and shaft bushing with the seal ring fitted, per IEC 60034-5. Cooling is natural convection — no external fan required."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32053P11A1000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32053P11A1000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}