{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32053P11A2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32053P11A2000","canonicalUrl":"https://aoctrl.com/schneider/SH32053P11A2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH32053P11A2000","rawCanonicalId":null},"summary":{"shortDescription":"SH32053P11A2000 SH3 series three-phase servo motor, 10.6 kW continuous power at 400 V, 2000 rpm nominal speed, absolute single-turn SinCos Hiperface encoder, IP54/IP65, 136.1 A peak current, international standard flange mount.","salesMarkdown":"## Voltage-dependent torque — the spec that decides your fit The SH32053P11A2000: This SH3 series servo motor delivers 84.9 N·m nominal torque on 115 V single-phase supply, but only 40.2 N·m on 480 V three-phase — the torque drops more than half as voltage rises. That's not a flaw; it's the winding design. If your line runs 400 V three-phase, the 50.7 N·m at 2000 rpm is your working number, not the 115 V figure. Continuous power tops out at 10.6 kW at 400 V three-phase, with 10.1 kW at 480 V. The 136.1 A peak current (3-second rating) tells you the drive needs to handle that surge without tripping — size the drive for the peak, not the continuous. ## Encoder and feedback — what the Hiperface signal means for your drive The absolute single-turn SinCos Hiperface encoder gives position at power-up without a home cycle — critical for applications where the machine must know its location immediately after a power loss or emergency stop. Single-turn means it tracks one revolution; for multi-turn applications you'd need a different encoder option. The SinCos analog track also provides velocity feedback with higher resolution than incremental encoders — expect smoother low-speed operation if your drive supports SinCos interpolation. ## Mounting and environmental sealing IP54 with the standard shaft bushing (no shaft seal ring) — that's splash protection but not washdown. Add the IP65 shaft bushing option for environments where coolant mist or light spray is present. The motor body itself is IP65-rated per IEC 60034-5. Natural convection cooling — no fan means no fan noise or filter maintenance, but also means you can't overspeed the motor beyond its thermal limit without external airflow. The 130°C copper hot-spot temperature is the ceiling. ## Sourcing — current production, no cross-reference needed The SH32053P sizing reference anchors this in the SH3 family — if you're replacing a failed unit, confirm the encoder type (Hiperface absolute single-turn) and the shaft configuration (parallel key, no holding brake) match your original order code.","metaTitle":"SH32053P11A2000 servo motor, 10.6 kW, 2000 rpm","metaDescription":"SH32053P11A2000 three-phase servo motor, 10.6 kW at 400V, 2000 rpm, absolute single-turn SinCos Hiperface encoder, IP54/IP65, 136.1 A peak.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"19.3 in (489 mm)","Inertia":"0.0 kg.cm² of brake 0.0 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.4 in (10 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"Without","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"190 kg.cm²","Nominal torque":"751.4 lbf.in (84.9 N.m) 115 V single phase 658.5 lbf.in (74.4 N.m) 230 V single phase 448.7 lbf.in (50.7 N.m) 400 V three phase 355.8 lbf.in (40.2 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"10600 W","Mounting Support":"International standard flange","Sizing reference":"SH32053P","Back emf constant":"172 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"2920.7 lbf.in (330 N.m) 115...480 V three phase","Stator inductance":"6.3 mH","Stator resistance":"0.2 Ohm","Maximum current Irms":"136.1 A","Nominal output power":"4450 W 115 V single phase 7790 W 230 V single phase 10620 W 400 V three phase 10100 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"740 N","Output current 3s peak":"136.1 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"835.5 lbf.in (94.4 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"4500 N 1000 rpm 3570 N 2000 rpm 3120 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"33.2 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$7,597.14","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/47841b82bf8dee72c99beea20d3bc8f8.pdf","sourceUrl":"https://www.se.com/us/en/product/SH32053P11A2000/servo-motor-sh3-205-944nmkeysinglenobrake90âconn-ip54-ip653-8k-rpm/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH32053P11A2000/alternatives.json"},"ai":{"faq":[{"question":"What is the nominal torque at 400 V three-phase?","answer":"50.7 N·m at 2000 rpm on 400 V three-phase supply. At 480 V three-phase it drops to 40.2 N·m. The torque varies significantly with supply voltage, so match the voltage on your line to the correct torque column."},{"question":"What encoder type does this motor use?","answer":"Absolute single-turn SinCos Hiperface encoder. It provides absolute position within one revolution and analog SinCos velocity feedback. Your drive must support the Hiperface protocol to use the absolute position feature."},{"question":"What is the IP rating and can it handle washdown?","answer":"IP54 with the standard shaft bushing — splash-resistant but not washdown-rated. With the optional IP65 shaft bushing, the motor achieves IP65 per IEC 60034-5, suitable for coolant mist or light spray environments. The motor body itself is IP65-rated."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32053P11A2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32053P11A2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}