{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32053P11F1000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32053P11F1000","canonicalUrl":"https://aoctrl.com/schneider/SH32053P11F1000","factsUrl":"https://aoctrl.com/api/mcp/products/SH32053P11F1000","rawCanonicalId":null},"summary":{"shortDescription":"Kollmorgen SH3 series servo motor, order code SH32053P11F1000, 10.6 kW continuous power, 330 Nm peak stall torque, IP65, with holding brake and absolute single-turn SinCos Hiperface encoder.","salesMarkdown":"## Supply-dependent performance — the spec that decides the drive match The SH32053P11F1000: This motor's nominal torque, speed, and output power all shift with the supply voltage and phase configuration — it's not a single-rating part. At 115 V single phase, nominal torque is 84.9 Nm at 500 rpm, delivering 4450 W. On 400 V three-phase, torque drops to 50.7 Nm but speed climbs to 2000 rpm, output 10620 W. On 480 V three-phase, nominal torque is 40.2 Nm at 2400 rpm, output 10100 W. Peak stall torque is 330 Nm across the 115–480 V three-phase range, and continuous stall torque is 94.4 Nm. The holding brake delivers 80 Nm — enough to hold the load at rest but well below the motor's peak capability, so don't rely on it for emergency stopping under full load. Continuous power is 10600 W, with a maximum current Irms of 136.1 A (3s peak same value). The stator resistance is 0.2 Ohm and inductance 2.05 mH — these numbers feed the drive's autotune and current-loop gain settings. ## Shaft and encoder — what bolts on and what talks to the drive Shaft diameter is 38 mm with a parallel key (key width 10 mm), shaft length 80 mm. The motor flange is 205 mm (IEC standard flange). Centring collar depth is 4 mm — verify the mating pilot bore depth on your existing mount. Encoder is an absolute single-turn SinCos Hiperface — this is a proprietary feedback protocol that requires a compatible drive (Kollmorgen AKD or third-party with Hiperface interface). The rotatable right-angled connector (or straight connector option) gives some cable-exit flexibility in tight enclosures. ## Environmental protection and mechanical limits IP rating depends on the shaft seal configuration: IP54 at the shaft bushing without a seal ring, IP65 for the motor body and with the shaft seal ring fitted. If this motor goes into a washdown area, specify the shaft seal ring option — the base IP65 motor rating is fine for the housing, but the shaft exit is the leak path. Maximum radial force Fr is 4500 N at 1000 rpm, derating to 3120 N at 3000 rpm. Maximum axial force Fa is 740 N. These limits govern belt-drive or overhung-load applications — a direct coupling is preferred to avoid exceeding the bearing ratings. Cooling is natural convection — no fan, so the motor relies on its own surface area and the mounting flange for heat dissipation. The copper hot-spot temperature is 130 °C. In a confined cabinet or high-ambient environment, check the thermal derating against the continuous torque curve.","metaTitle":"Kollmorgen SH32053P11F1000 servo motor, 10.6 kW, 330 Nm peak","metaDescription":"Kollmorgen SH32053P11F1000 servo motor, 10.6 kW continuous, 330 Nm peak stall torque, IP65, with holding brake and Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32053P11F1000","Length":"21.2 in (538.5 mm)","Inertia":"16.0 kg.cm² of brake 190.0 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.4 in (10 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 205mm, 3 stacks, keyed Shaft, SinCos Singleturn 128, Brake, straight, IP54/65","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"206 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"751.4 lbf.in (84.9 N.m) 115 V single phase 658.5 lbf.in (74.4 N.m) 230 V single phase 448.7 lbf.in (50.7 N.m) 400 V three phase 355.8 lbf.in (40.2 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"10600 W","Mounting Support":"International standard flange","Sizing reference":"SH32053P","Back emf constant":"172 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"2920.7 lbf.in (330 N.m) 115...480 V three phase","Stator inductance":"2.05 mH","Stator resistance":"0.2 Ohm","Maximum current Irms":"136.1 A","Nominal output power":"4450 W 115 V single phase 7790 W 230 V single phase 10620 W 400 V three phase 10100 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"740 N","Output current 3s peak":"136.1 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"835.5 lbf.in (94.4 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"4500 N 1000 rpm 3570 N 2000 rpm 3120 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"33.2 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$9,995.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/47841b82bf8dee72c99beea20d3bc8f8.pdf","sourceUrl":"https://www.se.com/ca/en/product/SH32053P11F1000/sh3-servomotor-205mm-3-stacks-keyed-shaft-sincos-singleturn-128-brake-straight-ip54-65/"},"ai":{"faq":[{"question":"What is the shaft diameter and keyway on SH32053P11F1000?","answer":"Shaft diameter is 38 mm with a parallel key, key width 10 mm. Shaft length is 80 mm."},{"question":"What encoder feedback does SH32053P11F1000 use?","answer":"Absolute single-turn SinCos Hiperface encoder. Requires a drive with Hiperface interface compatibility."},{"question":"What is the IP rating of SH32053P11F1000?","answer":"IP65 for the motor body and shaft bushing with seal ring; IP54 at the shaft bushing without the seal ring. Both conform to IEC 60034-5."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32053P11F1000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32053P11F1000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}