{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32053P11F1100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32053P11F1100","canonicalUrl":"https://aoctrl.com/schneider/SH32053P11F1100","factsUrl":"https://aoctrl.com/api/mcp/products/SH32053P11F1100","rawCanonicalId":null},"summary":{"shortDescription":"Servo motor, SH32053P series, 5-pole, 10.6 kW continuous, IP65, with holding brake, absolute single-turn SinCos Hiperface encoder, 1.5 in shaft, parallel key.","salesMarkdown":"The SH32053P11F1100 is a 5-pole servo motor delivering 10.6 kW continuous power, with a nominal torque of 84.9 N.m at 115 V single phase, stepping down to 40.2 N.m at 480 V three phase — the voltage you feed it directly sets the torque ceiling. Nominal speed varies by supply: 500 rpm at 115 V single phase, 1000 rpm at 230 V single phase, 2000 rpm at 400 V three phase, and 2400 rpm at 480 V three phase. Match the drive voltage to the speed your application needs. Peak stall torque hits 330 N.m across the 115–480 V three-phase range, and the motor can deliver 136.1 A peak for 3 seconds — useful for short-duration acceleration or shock loads. The holding brake is rated at 80 N.m static torque — enough to hold a vertical axis or tool changer at rest without power to the motor. The brake is engaged when power is off. ## Encoder feedback and signal integrity The absolute single-turn SinCos Hiperface encoder gives position feedback at power-up — no homing cycle needed on single-turn applications. The SinCos analog tracks allow the drive to interpolate position beyond the encoder's native resolution. The back EMF constant is 172 V/krpm at 20 °C — a high value that means the motor generates significant voltage at speed. Check that the drive's DC bus can absorb regeneration without tripping on overvoltage. Stator resistance is 0.2 Ohm and inductance is 2.05 mH — the low resistance keeps I²R losses down, but the inductance limits current slew rate. The drive's current loop tuning should account for the L/R time constant of about 10 ms. ## Mechanical fit and environmental sealing The motor uses an international standard flange with a 205 mm pilot diameter and 14 mm mounting holes. The shaft is 38 mm diameter with a parallel key, 80 mm shaft length — verify the coupling or pulley bore matches before assembly. IP65 rating on both the motor body and the shaft bushing per IEC 60034-5 means it handles washdown and dust — suitable for food processing, packaging, or machine tool coolant spray. The rotatable right-angled connector lets you route the cable without adding a junction box. Natural convection cooling — no fan. The thermal limit is 130 °C on the copper windings. In a confined enclosure or high-ambient environment, derate the continuous torque or add forced air. ## Sourcing and lifecycle reality No pin-compatible or functional alternative is listed from the manufacturer — the SH32053P series is the current offering. If you need a cross-reference for a legacy machine, the sizing reference SH32053P may help identify the correct frame variant. Available as a single unit per package. Volume pricing and lead time confirmed at RFQ — no stock-holding claim from this listing.","metaTitle":"SH32053P11F1100 servo motor, 5-pole, 10.6 kW, IP65","metaDescription":"SH32053P11F1100 servo motor, 5-pole, 10.6 kW continuous, IP65, with holding brake and absolute single-turn SinCos Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32053P11F1100","Length":"21.2 in (538.5 mm)","Inertia":"16.0 kg.cm² of brake 190.0 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.4 in (10 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 205mm, 3 stacks, keyed Shaft, SinCos Singleturn 128, Brake, straight, IP65/65","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"206 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"751.4 lbf.in (84.9 N.m) 115 V single phase 658.5 lbf.in (74.4 N.m) 230 V single phase 448.7 lbf.in (50.7 N.m) 400 V three phase 355.8 lbf.in (40.2 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"10600 W","Mounting Support":"International standard flange","Sizing reference":"SH32053P","Back emf constant":"172 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"2920.7 lbf.in (330 N.m) 115...480 V three phase","Stator inductance":"2.05 mH","Stator resistance":"0.2 Ohm","Maximum current Irms":"136.1 A","Nominal output power":"4450 W 115 V single phase 7790 W 230 V single phase 10620 W 400 V three phase 10100 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"740 N","Output current 3s peak":"136.1 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"835.5 lbf.in (94.4 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"4500 N 1000 rpm 3570 N 2000 rpm 3120 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"33.2 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$10,045.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/47841b82bf8dee72c99beea20d3bc8f8.pdf","sourceUrl":"https://www.se.com/nl/en/product/SH32053P11F1100/sh3-servomotor-205mm-3-stacks-keyed-shaft-sincos-singleturn-128-brake-straight-ip65-65/"},"ai":{"faq":[{"question":"What is the shaft size and keyway on this motor?","answer":"The shaft diameter is 1.5 in (38 mm) with a parallel key, key width 0.4 in (10 mm), shaft length 3.1 in (80 mm). The centring collar depth is 0.2 in (4 mm)."},{"question":"What encoder type does SH32053P11F1100 use?","answer":"An absolute single-turn SinCos Hiperface encoder. It provides position at power-up and analog SinCos tracks for interpolation by the drive."},{"question":"What IP rating does this motor have?","answer":"IP65 per IEC 60034-5 on both the motor body and the shaft bushing. Suitable for washdown environments."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32053P11F1100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32053P11F1100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}