{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32053P11F1200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32053P11F1200","canonicalUrl":"https://aoctrl.com/schneider/SH32053P11F1200","factsUrl":"https://aoctrl.com/api/mcp/products/SH32053P11F1200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider SH3 series SH32053P11F1200 servo motor, three-phase, 5000 rpm, 80 N.m holding torque, 10600 W, IP65, with holding brake.","salesMarkdown":"## Where this SH3 servo lands on the machine The Schneider SH32053P11F1200 sits in the SH3 sizing reference (SH32053P) as a high-torque three-phase servo for industrial automation lines — conveyors, machine-tool spindles, packaging axes, and indexing tables where the constant-torque envelope up to 5000 rpm matters more than a peak speed figure. It pairs with a Lexium-series drive (the SH3 short name and Hiperface SinCos encoder are the system identifiers a commissioning engineer will look for in the drive's motor database) through a straight connector at the motor housing — the encoder feedback is single-turn absolute SinCos Hiperface, so the drive returns the absolute shaft position on power-up without a homing move. ## Torque envelope across the supply range Holding torque is 708.06 lbf.in (80 N.m) with the integrated holding brake; continuous stall torque runs 835.5 lbf.in (94.4 N.m) at all listed supply voltages, and peak stall torque reaches 2920.7 lbf.in (330 N.m) at 115…480 V three phase — the rating that governs how aggressively the axis can accelerate a heavy load before the drive folds into current limit. Nominal torque drops as supply voltage falls: 751.4 lbf.in (84.9 N.m) on 115 V single phase, 658.5 lbf.in (74.4 N.m) on 230 V single phase, 448.7 lbf.in (40.2 N.m) on 400 V three phase, and 355.8 lbf.in (40.2 N.m) on 480 V three phase — a 400 V or 480 V three-phase feed is what unlocks the full continuous torque the servo is sized for. ## Speed-power map by supply voltage Nominal speed scales with the supply: 500 rpm at 115 V single phase, 1000 rpm at 230 V single phase, 2000 rpm at 400 V three phase, and 2400 rpm at 480 V three phase — lower-voltage operation trades speed for torque and is only useful for low-rpm, high-torque axes. Nominal output power tracks the supply as well: 4450 W at 115 V single phase, 7790 W at 230 V single phase, 10620 W at 400 V three phase, and 10100 W at 480 V three phase; the continuous power of 10600 W corresponds to the 400 V three-phase operating point. ## Mechanical fit into the axis The 8.07 in (205 mm) international-standard flange with 0.6 in (14 mm) mounting holes is the mechanical interface a panel builder or OEM wireman aligns to gearbox and coupling partners — a parallel key (0.4 in / 10 mm) on a 1.5 in (38 mm) diameter shaft with 3.1 in (80 mm) protrusion locks the coupling without a clamp fit. Overall length is 21.2 in (538.5 mm), so the servo needs clearance for the rear straight connector and bend radius inside the cabinet; centring collar depth is 0.2 in (4 mm) and the housing carries IP67 protection at the body, IP65 at the motor envelope and shaft bushing, all per IEC 60034-5 — meaning the SH32053P11F1200 tolerates washdown and dust-laden production cells without an additional shroud. Maximum radial force at the shaft end derates from 4500 N at 1000 rpm to 3570 N at 2000 rpm down to 3120 N at 3000 rpm; maximum axial force Fa is 740 N — these are the load limits the gearbox and belt drive must respect when the axis is running at full speed. ## Winding electricals and thermal ceiling Stator resistance is 0.2 Ohm and stator inductance is 2.05 mH; torque constant is 2.84 N.m/A at 248 °F (120 °C) and the back-EMF constant is 172 V/krpm at 68 °F (20 °C) — the latter defines the drive's DC-bus voltage budget to reach top speed before the regeneration limit collapses the field-weakening range. Maximum current Irms is 136.1 A and the 3-second peak output current matches that figure; copper-hot temperature is 266 °F (130 °C) on natural convection cooling, so the motor must be sited with the body free of insulating wraps and the airflow path the convection rating was measured against.","metaTitle":"SH32053P11F1200 Servo Motor, 80 N.m, 5000 rpm, IP65","metaDescription":"Schneider SH32053P11F1200 SH3 servo motor: 80 N.m holding, 10600 W continuous, three-phase, IP65. Quoted to order against the BOM at RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32053P11F1200","Length":"21.2 in (538.5 mm)","Inertia":"16.0 kg.cm² of brake 190.0 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.4 in (10 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 205mm, 3 stacks, keyed Shaft, SinCos Singleturn 128, Brake, straight, IP65/67","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"206 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"751.4 lbf.in (84.9 N.m) 115 V single phase 658.5 lbf.in (74.4 N.m) 230 V single phase 448.7 lbf.in (50.7 N.m) 400 V three phase 355.8 lbf.in (40.2 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"10600 W","Mounting Support":"International standard flange","Sizing reference":"SH32053P","Back emf constant":"172 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"2920.7 lbf.in (330 N.m) 115...480 V three phase","Stator inductance":"2.05 mH","Stator resistance":"0.2 Ohm","Maximum current Irms":"136.1 A","Nominal output power":"4450 W 115 V single phase 7790 W 230 V single phase 10620 W 400 V three phase 10100 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Straight connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"740 N","Output current 3s peak":"136.1 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"835.5 lbf.in (94.4 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"4500 N 1000 rpm 3570 N 2000 rpm 3120 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"33.2 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"{'url': 'https://www.se.com/ie/en/product/download-pdf/SH32053P11F1200?filename=Schneider+Electric_Lexium-52-Motors_SH32053P11F1200.pdf', 'path_name': '641ed36c8ed267c984db98d34fc4feee.pdf', 'path_url': 'https://s3.lax.sharktech.net/viassion/datasheets/schneider_electric/641ed36c8ed267c984db98d34fc4feee.pdf', 'status': 1}","sourceUrl":"https://www.se.com/ie/en/product/SH32053P11F1200/sh3-servomotor-205mm-3-stacks-keyed-shaft-sincos-singleturn-128-brake-straight-ip65-67/"},"ai":{"faq":[{"question":"What is SH32053P11F1200's listed length on this component line?","answer":"Overall length is 21.2 in (538.5 mm) on the SH32053P11F1200, giving the rear connector and bend radius the clear cabinet depth they need when the axis is plumbed in."},{"question":"What compliance documentation does the brand provide for SH32053P11F1200?","answer":"The motor's ingress protection is rated to IEC 60034-5 — IP65 on the motor envelope and shaft bushing, IP67 on the housing. That's the only compliance standard explicitly carried on the record; RoHS, REACH, UL, or CE declaration packs are not part of this spec ledger and would be requested at quote time."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32053P11F1200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32053P11F1200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}