{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32053P11F2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32053P11F2000","canonicalUrl":"https://aoctrl.com/schneider/SH32053P11F2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH32053P11F2000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series SH32053P11F2000 three-phase servo motor, 80 N.m holding torque, 10600 W continuous power, Hiperface SinCos absolute single-turn encoder, IP65, international standard flange.","salesMarkdown":"## What it does and where it fits The SH32053P11F2000 is a three-phase brushless servo motor from Schneider Electric's SH3 family (device short name SH3, sizing reference SH32053P) with an integrated absolute single-turn SinCos Hiperface encoder, so position feedback reaches the drive on power-up without a homing move — meaningful on indexing axes where a few degrees of homing travel is unacceptable. Cooling is natural convection — no blower, no liquid loop — which suits enclosed cabinets and food-area mounts where forced-air ducting is awkward, though it caps continuous output at 10600 W and ties the thermal envelope to the stator hot-spot limit of 266 °F (130 °C). ## Torque and power envelope across supply rails Holding torque is 80 N.m (708.06 lbf.in); peak stall torque reaches 330 N.m (2920.7 lbf.in) at 115…480 V three phase — a 4× overload margin that lets the drive pull the load through acceleration peaks before the thermal cutback engages. Nominal torque depends heavily on the bus the drive runs on: 84.9 N.m at 115 V single phase, 74.4 N.m at 230 V single phase, 50.7 N.m at 400 V three phase, and 40.2 N.m at 480 V three phase. At 400 V the motor still delivers 7790 W continuous into a 1000 rpm mechanical output, which is the point a packaging line designer reads: keep the supply at 400 V three phase and the SH3 plate numbers translate almost directly into line throughput. Maximum Irms is 136.1 A with a 3-second peak output of 136.1 A; torque constant is 2.84 N.m/A at 248 °F (120 °C) winding. The current and torque constants let the drive's current loop be commissioned against a known Kt rather than the autotune default. ## Load matching and mechanical fit It mounts on the standard SH3 footprint — no adapter plate needed when a like-for-like replacement is on the BOM. Shaft loading is rated 4500 N radial at 1000 rpm, derating to 3570 N at 2000 rpm and 3120 N at 3000 rpm, with a maximum axial force of 740 N. These are the numbers to check against the gearhead or coupling reaction — over-running radial load on a belt drive is the most common cause of premature bearing wear. ## Environment, sealing and electrical hook-up Ingress protection is IP65 on both the motor body and the shaft bushing, with IP54 on the shaft bushing variant without a shaft seal ring — all per IEC 60034-5. That covers washdown-adjacent zones and most outdoor enclosures, but does not reach IP67 — for direct washdown jets a sealed shaft-bushing variant or shaft seal ring upgrade must be added. Electrical connection is offered both as a straight connector and a rotatable right-angled connector; the rotatable right-angle option is the one to specify when the cabinet layout would otherwise bend the cable past its minimum bend radius. Back-EMF constant is 172 V/krpm at 68 °F (20 °C), stator resistance 0.2 Ω and stator inductance 6.3 mH — with 5 motor poles, the drive's current-loop bandwidth can be set tight without hitting the volt-second limit at the rated speed. ## Lifecycle and BOM-side sourcing No price, stock, or lead-time figure is published on this listing.","metaTitle":"SH32053P11F2000 SH3 Servo Motor, 80 N.m, 2000 rpm","metaDescription":"Schneider Electric SH3 servo motor, 80 N.m holding, 10600 W continuous, IP65 with Hiperface encoder. Sourced to order against an RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Obsolete","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","Length":"21.2 in (538.5 mm)","Inertia":"16.0 kg.cm² of brake 0.0 kg.cm² of motor","Key width":"0.4 in (10 mm)","Shaft end":"Parallel key","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"206 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"751.4 lbf.in (84.9 N.m) 115 V single phase 658.5 lbf.in (74.4 N.m) 230 V single phase 448.7 lbf.in (50.7 N.m) 400 V three phase 355.8 lbf.in (40.2 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"10600 W","Mounting Support":"International standard flange","Sizing reference":"SH32053P","Back emf constant":"172 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"2920.7 lbf.in (330 N.m) 115...480 V three phase","Stator inductance":"6.3 mH","Stator resistance":"0.2 Ohm","Maximum current Irms":"136.1 A","Nominal output power":"4450 W 115 V single phase 7790 W 230 V single phase 10620 W 400 V three phase 10100 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"740 N","Output current 3s peak":"136.1 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"835.5 lbf.in (94.4 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"4500 N 1000 rpm 3570 N 2000 rpm 3120 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"33.2 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/us/en/product/SH32053P11F2000/sh3-servomotor-205mm-3-stacks-keyed-shaft-sincos-singleturn-128-brake-angular-ip54-65/","alternativesUrl":"https://aoctrl.com/api/mcp/products/SH32053P11F2000/alternatives.json"},"ai":{"faq":[{"question":"How do I order SH32053P11F2000 — who supplies it and how is it quoted?","answer":"The unit ships one per package."},{"question":"What phase and length is listed for SH32053P11F2000?","answer":"Phase is three phase; motor length is 21.2 in (538.5 mm). The motor flange sits at 205 mm and the centring collar at 180 mm with 14 mm mounting holes."},{"question":"What is the closest pin-compatible alternative to SH32053P11F2000?","answer":"A like-for-like replacement should match the 205 mm flange, 38 mm shaft with 10 mm key, Hiperface SinCos single-turn encoder, holding brake and IP65 rating; any cross-reference at that level needs to come from the drive-side configuration tool, not from this listing."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32053P11F2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32053P11F2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}