{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32053P11F2100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32053P11F2100","canonicalUrl":"https://aoctrl.com/schneider/SH32053P11F2100","factsUrl":"https://aoctrl.com/api/mcp/products/SH32053P11F2100","rawCanonicalId":null},"summary":{"shortDescription":"SH32053P11F2100 servo motor, three-phase, 10.6 kW continuous power, IP65, with holding brake, absolute single-turn SinCos Hiperface encoder, 1.5 in shaft diameter, 21.2 in length.","salesMarkdown":"## Motor specs for the BOM line The SH32053P11F2100 is a three-phase servo motor from the SH3 series, delivering 10,600 W continuous power and a nominal torque of 751.4 lbf·in (84.9 N·m) at 115 V single-phase, stepping to 448.7 lbf·in (50.7 N·m) at 400 V three-phase. Peak stall torque hits 2920.7 lbf·in (330 N·m) across 115–480 V three-phase, with a continuous stall torque of 835.5 lbf·in (94.4 N·m) — the motor can hold that torque indefinitely without overheating, which matters for clamping or indexing applications. The holding brake delivers 708.06 lbf·in (80 N·m) — enough to lock the shaft on a vertical axis when power is removed. If your application needs a brake, this motor has it integrated; no separate brake module needed. ## Signal integrity and encoder choice Encoder is an absolute single-turn SinCos Hiperface — that means you get position feedback at power-up without a homing cycle, and the SinCos analog track gives fine interpolation for high-resolution velocity control. The signal is differential, so it rejects common-mode noise from VFD cables as long as the shield is bonded at the drive end. Stator resistance is 0.2 Ω and inductance 2.05 mH — low enough that peak current (136.1 A for 3 s) can rise fast, but the drive's current loop tuning needs to account for the L/R time constant. Check the shield first if you see position jitter; the Hiperface link is sensitive to ground loops. ## Mounting and mechanical integration Mounts to an international standard flange (size 205 mm flange, 8.07 in) with a centring collar depth of 0.2 in (4 mm) and four 14 mm mounting holes. The shaft is 1.5 in (38 mm) diameter with a parallel key, 3.1 in (80 mm) long — standard for coupling to a gearbox or pulley. Overall length is 21.2 in (538.5 mm). The electrical connection comes as a straight connector or a rotatable right-angled connector — choose the one that fits your cable routing without a tight bend radius. IP65 rating on the motor and shaft bushing per IEC 60034-5 means it handles washdown and airborne dust — fine for food processing or machining centres, but not submersion. Cooling is natural convection, so keep the ambient airflow clear of obstructions.","metaTitle":"SH32053P11F2100 Servo Motor, 10.6 kW, IP65","metaDescription":"SH32053P11F2100 servo motor, 10.6 kW continuous, IP65, 80 Nm holding brake, absolute encoder. Active production, sourced to order. Request a quote.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32053P11F2100","Length":"21.2 in (538.5 mm)","Inertia":"16.0 kg.cm² of brake 190.0 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.4 in (10 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 205mm, 3 stacks, keyed Shaft, SinCos Singleturn 128, Brake, angular, IP65/65","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"206 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"751.4 lbf.in (84.9 N.m) 115 V single phase 658.5 lbf.in (74.4 N.m) 230 V single phase 448.7 lbf.in (50.7 N.m) 400 V three phase 355.8 lbf.in (40.2 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"10600 W","Mounting Support":"International standard flange","Sizing reference":"SH32053P","Back emf constant":"172 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"2920.7 lbf.in (330 N.m) 115...480 V three phase","Stator inductance":"2.05 mH","Stator resistance":"0.2 Ohm","Maximum current Irms":"136.1 A","Nominal output power":"4450 W 115 V single phase 7790 W 230 V single phase 10620 W 400 V three phase 10100 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"740 N","Output current 3s peak":"136.1 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"835.5 lbf.in (94.4 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"4500 N 1000 rpm 3570 N 2000 rpm 3120 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"33.2 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$10,045.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/47841b82bf8dee72c99beea20d3bc8f8.pdf","sourceUrl":"https://www.se.com/us/en/product/SH32053P11F2100/sh3-servomotor-205mm-3-stacks-keyed-shaft-sincos-singleturn-128-brake-angular-ip65-65/"},"ai":{"faq":[{"question":"How do I get current pricing and availability for SH32053P11F2100?","answer":"Submit an RFQ through this page."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32053P11F2100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32053P11F2100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}