{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32053P11F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32053P11F2200","canonicalUrl":"https://aoctrl.com/schneider/SH32053P11F2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH32053P11F2200","rawCanonicalId":null},"summary":{"shortDescription":"SH32053P11F2200 three-phase servo motor, 10.6 kW continuous power, 2400 rpm, IP65/IP67, holding brake 80 Nm, absolute single-turn SinCos Hiperface encoder, 38 mm shaft with parallel key.","salesMarkdown":"## Motor ratings across supply voltages The SH32053P11F2200: This SH3-series servo motor delivers 10.6 kW continuous at 400 V three-phase, with nominal torque of 50.7 Nm. On 480 V three-phase it produces 10.1 kW and 40.2 Nm. Single-phase 115 V and 230 V inputs yield lower output — 4.45 kW / 84.9 Nm and 7.79 kW / 74.4 Nm respectively — so the supply voltage directly sets the usable torque in the application. Nominal speed varies by supply: 500 rpm at 115 V single-phase, 1000 rpm at 230 V single-phase, 2000 rpm at 400 V three-phase, and 2400 rpm at 480 V three-phase. The 2400 rpm ceiling at 480 V makes this a medium-speed servo suited to direct-drive or low-ratio applications. ## Torque capability and brake The holding brake holds 80 Nm static — enough to keep the load from drifting when the drive is off. This is a spring-applied, electrically-released brake; it engages on power loss, so it serves as a safety-holding device for vertical-axis loads. ## Shaft, flange, and environmental sealing The 38 mm shaft with a 10 mm parallel key and 80 mm shaft length matches standard coupling bores for medium-frame servos. The international standard flange (205 mm pilot diameter, 14 mm mounting holes, 4 mm centring collar depth) bolts directly to common gearbox input flanges without an adapter plate. IP65 on the motor body and shaft bushing, plus IP67 on the housing — this motor handles washdown environments and dusty conditions. The rotatable right-angled connector lets the cable exit in any quadrant, simplifying routing in tight cabinets or on moving axes. ## Encoder feedback and electrical limits The absolute single-turn SinCos Hiperface encoder provides position feedback without a home cycle on power-up — the drive reads the absolute position from the encoder's multi-turn count. This eliminates the need for reference marks on the machine frame and speeds commissioning. Stator resistance is 0.2 Ω and inductance is 2.05 mH, giving a low electrical time constant for good current-loop response. Maximum RMS current is 136.1 A, which sets the drive sizing requirement — the servo drive must supply at least this peak current for 3 seconds to use the full stall torque. Back EMF constant is 172 V/krpm at 20°C — at 2400 rpm the motor generates 413 V back EMF, so the drive DC bus must stay above this to maintain current control. The torque constant is 2.84 Nm/A at 120°C copper temperature, giving a linear torque-to-current relationship for the servo loop. ## Mechanical load limits Maximum radial force at the shaft nose is 4500 N at 1000 rpm, dropping to 3570 N at 2000 rpm and 3120 N at 3000 rpm. Maximum axial force is 740 N. These limits govern belt-drive or overhung-load applications — exceeding them shortens bearing life. Cooling is by natural convection — no external fan or forced air required. The motor relies on its surface area and the mounting flange for heat dissipation, so it must be mounted on a metal surface or have free air circulation around the housing.","metaTitle":"SH32053P11F2200 servo motor, 10.6 kW, 2400 rpm, IP65","metaDescription":"SH32053P11F2200 three-phase servo motor, 10.6 kW continuous, 2400 rpm, IP65/IP67, holding brake 80 Nm, absolute encoder. Active production, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32053P11F2200","Length":"21.2 in (538.5 mm)","Inertia":"16.0 kg.cm² of brake 190.0 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.4 in (10 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 205mm, 3 stacks, keyed Shaft, SinCos Singleturn 128, Brake, angular, IP65/67","Encoder type":"Absolute single turn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"206 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"751.4 lbf.in (84.9 N.m) 115 V single phase 658.5 lbf.in (74.4 N.m) 230 V single phase 448.7 lbf.in (50.7 N.m) 400 V three phase 355.8 lbf.in (40.2 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"10600 W","Mounting Support":"International standard flange","Sizing reference":"SH32053P","Back emf constant":"172 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"2920.7 lbf.in (330 N.m) 115...480 V three phase","Stator inductance":"2.05 mH","Stator resistance":"0.2 Ohm","Maximum current Irms":"136.1 A","Nominal output power":"4450 W 115 V single phase 7790 W 230 V single phase 10620 W 400 V three phase 10100 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"740 N","Output current 3s peak":"136.1 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"835.5 lbf.in (94.4 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"4500 N 1000 rpm 3570 N 2000 rpm 3120 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"33.2 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$10,410.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/47841b82bf8dee72c99beea20d3bc8f8.pdf","sourceUrl":"https://www.se.com/ca/en/product/SH32053P11F2200/sh3-servomotor-205mm-3-stacks-keyed-shaft-sincos-singleturn-128-brake-angular-ip65-67/"},"ai":{"faq":[{"question":"Where can I buy SH32053P11F2200 and get a price?","answer":"This part is sourced through independent industrial distribution. No stock-holding claim is made here."},{"question":"What is SH32053P11F2200's listed phase?","answer":"The motor is a three-phase design, though it can also run on single-phase supplies at reduced output — see the speed and torque values for 115 V and 230 V single-phase inputs."},{"question":"What is SH32053P11F2200's length?","answer":"Overall length is 21.2 inches (538.5 mm), which includes the shaft extension and encoder housing. This dimension is needed for envelope checks in the machine frame."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32053P11F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32053P11F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}