{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32053P12A1100","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32053P12A1100","canonicalUrl":"https://aoctrl.com/schneider/SH32053P12A1100","factsUrl":"https://aoctrl.com/api/mcp/products/SH32053P12A1100","rawCanonicalId":null},"summary":{"shortDescription":"SH32053P12A1100 three-phase servo motor, 10.6 kW continuous, 136 A Irms, 2400 rpm, IP65, absolute multiturn SinCos Hiperface encoder, 19.3 in length, international standard flange.","salesMarkdown":"## Motor frame and physical fit The SH32053P12A1100: Overall length 19.3 in (489 mm) with a flange size of 8.07 in (205 mm) and centring collar diameter 7.09 in (180 mm) — this is a standard international flange pattern, so it replaces most IEC-frame servo motors in the same power class without reworking the mounting plate. Shaft diameter is 1.5 in (38 mm) with a parallel key, shaft length 3.1 in (80 mm), key width 0.4 in (10 mm). The centring collar depth is 0.2 in (4 mm). No holding brake fitted — if your application needs a holding brake, budget an external one. Mounting holes diameter 0.6 in (14 mm) on the flange. The motor is naturally convection cooled — no forced air or blower needed, but that also means no fan noise and no filter maintenance. ## Electrical performance across supply voltages This is a three-phase servo motor, but the nominal torque and speed change significantly with the supply voltage. At 115 V single phase you get 751.4 lbf.in (84.9 N.m) at 500 rpm; at 480 V three phase it delivers 355.8 lbf.in (40.2 N.m) at 2400 rpm. The continuous power is 10600 W — that's the thermal limit, not the peak. Peak stall torque is 2920.7 lbf.in (330 N.m) across the 115...480 V three-phase range — that's the short-term overload for acceleration or emergency stop. Continuous stall torque is 835.5 lbf.in (94.4 N.m) — the torque the motor can hold indefinitely without overheating. Maximum current Irms is 136.1 A — that's the drive's peak current requirement. The stator resistance is 0.2 Ohm and inductance 2.05 mH, which sets the electrical time constant and influences the servo loop tuning. Torque constant is 2.84 N.m/A at 248 °F (120 °C) copper temperature. ## Feedback and environmental sealing Encoder is absolute multiturn SinCos Hiperface — this gives position feedback without a home cycle on power-up, and the multiturn count tracks absolute position over multiple shaft revolutions. Back EMF constant is 172 V/krpm at 68 °F (20 °C), which matters for the drive's voltage bus margin at high speed. IP65 rating on both the motor body and the shaft bushing per IEC 60034-5 — the motor withstands hose-directed water and dust ingress. Suitable for washdown environments in food processing or packaging lines where the motor is mounted directly on the machine frame.","metaTitle":"SH32053P12A1100 servo motor, 10.6 kW, 136 A, 2400 rpm, IP65","metaDescription":"SH32053P12A1100 three-phase servo motor, 10.6 kW continuous, 136 A peak, 2400 rpm, IP65, absolute Hiperface encoder. Active production, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32053P12A1100","Length":"19.3 in (489 mm)","Inertia":"0.0 kg.cm² of brake 190.0 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.4 in (10 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 205mm, 3 stacks, keyed Shaft, SinCos Multiturn 128, no Brake, straight, IP65/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"Without","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"190 kg.cm²","Nominal torque":"751.4 lbf.in (84.9 N.m) 115 V single phase 658.5 lbf.in (74.4 N.m) 230 V single phase 448.7 lbf.in (50.7 N.m) 400 V three phase 355.8 lbf.in (40.2 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"10600 W","Mounting Support":"International standard flange","Sizing reference":"SH32053P","Back emf constant":"172 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"2920.7 lbf.in (330 N.m) 115...480 V three phase","Stator inductance":"2.05 mH","Stator resistance":"0.2 Ohm","Maximum current Irms":"136.1 A","Nominal output power":"4450 W 115 V single phase 7790 W 230 V single phase 10620 W 400 V three phase 10100 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"740 N","Output current 3s peak":"136.1 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"835.5 lbf.in (94.4 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"4500 N 1000 rpm 3570 N 2000 rpm 3120 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"33.2 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$10,290.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/47841b82bf8dee72c99beea20d3bc8f8.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH32053P12A1100/sh3-servomotor-205mm-3-stacks-keyed-shaft-sincos-multiturn-128-no-brake-straight-ip65-65/"},"ai":{"faq":[{"question":"What is the peak torque and current of SH32053P12A1100?","answer":"Peak stall torque is 2920.7 lbf.in (330 N.m) across 115...480 V three phase. Maximum current Irms is 136.1 A — that's the drive's peak current requirement for short-term overload."},{"question":"What encoder does SH32053P12A1100 use?","answer":"Absolute multiturn SinCos Hiperface encoder — provides position and multiturn count without a homing cycle on power-up."},{"question":"What is the IP rating of SH32053P12A1100?","answer":"IP65 for both the motor body and the shaft bushing, conforming to IEC 60034-5 — suitable for washdown environments."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32053P12A1100","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32053P12A1100 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}