{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32053P12A2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32053P12A2200","canonicalUrl":"https://aoctrl.com/schneider/SH32053P12A2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH32053P12A2200","rawCanonicalId":null},"summary":{"shortDescription":"SH32053P12A2200 three-phase servo motor, SH3 series, 10.6 kW continuous power, 2400 rpm at 480 V, IP65/IP67, absolute multiturn SinCos Hiperface encoder, 136.1 A max current, natural convection cooling.","salesMarkdown":"## Voltage-dependent torque and speed — the real selection constraint The SH32053P12A2200: This SH3-series servo motor delivers 751.4 lbf.in (84.9 N.m) nominal torque at 115 V single-phase input, but that drops to 355.8 lbf.in (40.2 N.m) when fed from 480 V three-phase — the torque constant is 2.84 N.m/A at 120 °C copper temperature, so the available torque follows the current the drive can push at each supply voltage. Nominal speed climbs from 500 rpm at 115 V single-phase to 2400 rpm at 480 V three-phase; the 10,600 W continuous power rating is the thermal ceiling, not the mechanical limit — the motor can sustain that output as long as the natural convection cooling (no fan) keeps the 130 °C copper hot-spot temperature within limits. ## Encoder feedback and environmental sealing The absolute multiturn SinCos Hiperface encoder provides position feedback without a homing cycle on power-up — critical for vertical-axis applications where the load position must be known immediately after a power loss. The rotatable right-angled connector lets the cable exit in any of four orientations, simplifying cable routing in tight cabinets. Three-zone IP protection: the motor body is IP65, the shaft bushing is IP65, and the housing is IP67 — the housing seal is the wet-end barrier, so the motor survives washdown spray but the shaft bushing is only splash-rated. The 4500 N maximum radial force at 1000 rpm sets the belt-drive or direct-coupling limit; exceed that and the bearing life degrades. ## Mounting envelope and shaft interface International standard flange with 8.07 in (205 mm) centring collar diameter and 0.2 in (4 mm) collar depth — mates with standard IEC B5 or B14 flanges. The 1.5 in (38 mm) shaft with parallel key and 3.1 in (80 mm) shaft length is a common NEMA 38 mm interface; the 0.4 in (10 mm) key width matches standard key stock. Overall length 19.3 in (489 mm) from mounting face to rear housing — measure the available cavity before ordering; the natural convection cooling requires clearance around the housing for airflow, so don't bury it against a panel wall. The motor ships as a single unit with the rotatable connector pre-fitted; no holding brake means the application must provide external holding torque via the drive's brake resistor or a mechanical brake on the load.","metaTitle":"SH32053P12A2200 Servo Motor, 10.6 kW, 2400 rpm, IP65/IP67","metaDescription":"SH32053P12A2200 three-phase servo motor, 10.6 kW continuous power, 2400 rpm at 480 V, IP65/IP67, absolute multiturn Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32053P12A2200","Length":"19.3 in (489 mm)","Inertia":"0.0 kg.cm² of brake 190.0 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.4 in (10 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 205mm, 3 stacks, keyed Shaft, SinCos Multiturn 128, no Brake, angular, IP65/67","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"Without","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"190 kg.cm²","Nominal torque":"751.4 lbf.in (84.9 N.m) 115 V single phase 658.5 lbf.in (74.4 N.m) 230 V single phase 448.7 lbf.in (50.7 N.m) 400 V three phase 355.8 lbf.in (40.2 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"10600 W","Mounting Support":"International standard flange","Sizing reference":"SH32053P","Back emf constant":"172 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"2920.7 lbf.in (330 N.m) 115...480 V three phase","Stator inductance":"2.05 mH","Stator resistance":"0.2 Ohm","Maximum current Irms":"136.1 A","Nominal output power":"4450 W 115 V single phase 7790 W 230 V single phase 10620 W 400 V three phase 10100 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"740 N","Output current 3s peak":"136.1 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"835.5 lbf.in (94.4 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"4500 N 1000 rpm 3570 N 2000 rpm 3120 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"33.2 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$10,655.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/47841b82bf8dee72c99beea20d3bc8f8.pdf","sourceUrl":"https://www.se.com/nl/en/product/SH32053P12A2200/sh3-servomotor-205mm-3-stacks-keyed-shaft-sincos-multiturn-128-no-brake-angular-ip65-67/"},"ai":{"faq":[{"question":"What compliance documentation does this brand provide for SH32053P12A2200?","answer":"The IP degree of protection is certified to IEC 60034-5 — IP65 for the motor body and shaft bushing, IP67 for the housing. No RoHS, REACH, or UL listing appears in the available documentation; confirm with the supplier at RFQ if these are required for your jurisdiction."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32053P12A2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32053P12A2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}