{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32053P12F1000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32053P12F1000","canonicalUrl":"https://aoctrl.com/schneider/SH32053P12F1000","factsUrl":"https://aoctrl.com/api/mcp/products/SH32053P12F1000","rawCanonicalId":null},"summary":{"shortDescription":"SH32053P12F1000 servo motor, 5-pole three-phase, 10.6 kW continuous, 80 N·m holding brake, absolute multiturn SinCos Hiperface encoder, IP54/IP65, 538.5 mm length.","salesMarkdown":"## Torque and speed across supply voltages The SH32053P12F1000: This 5-pole servo motor delivers nominal torque that varies with the supply: 84.9 N·m at 115 V single-phase, 74.4 N·m at 230 V single-phase, 50.7 N·m at 400 V three-phase, and 40.2 N·m at 480 V three-phase. Nominal speed follows the same pattern — 500 rpm at 115 V single-phase, 1000 rpm at 230 V single-phase, 2000 rpm at 400 V three-phase, and 2400 rpm at 480 V three-phase. The continuous power rating is 10,600 W. Peak stall torque reaches 330 N·m across the 115–480 V three-phase range, with continuous stall torque at 94.4 N·m. The torque constant is 2.84 N·m/A at 120 °C copper temperature, and the back EMF constant is 172 V/krpm at 20 °C. ## Encoder, brake, and feedback integration The motor carries an absolute multiturn SinCos Hiperface encoder — this gives position feedback without a home cycle on power-up, which matters for applications where the machine must resume from a known position after a power loss. The holding brake delivers 80 N·m static torque, sized to hold the load on a vertical axis without servo current. Electrical connection options include a rotatable right-angled connector and a straight connector — choose the one that fits the cable routing in the cabinet or on the machine frame. The motor flange is 205 mm (8.07 in) with an international standard flange pattern; mounting holes are 14 mm diameter. ## Shaft, cooling, and environmental ratings The shaft is 38 mm diameter with a parallel key, 80 mm shaft length, and a 10 mm key width. Cooling is by natural convection — no forced air or liquid cooling circuit needed, which simplifies installation in clean environments but means the thermal budget depends on free air movement around the motor body. IP protection is dual-rated: IP54 at the shaft bushing without the shaft seal ring, and IP65 for the motor body and shaft bushing with the seal ring fitted, per IEC 60034-5. The IP65 rating suits washdown or dusty environments; the IP54 bushing option is for drier applications where shaft seal drag is a concern. Maximum radial force at the shaft is 4500 N at 1000 rpm, 3570 N at 2000 rpm, and 3120 N at 3000 rpm. Maximum axial force is 740 N. Stator resistance is 0.2 Ω, stator inductance 2.05 mH.","metaTitle":"SH32053P12F1000 servo motor, 10.6 kW, 5-pole","metaDescription":"SH32053P12F1000 servo motor, 10.6 kW continuous, 5-pole, 80 N·m holding brake, absolute multiturn encoder, IP54/IP65. Active production, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32053P12F1000","Length":"21.2 in (538.5 mm)","Inertia":"16.0 kg.cm² of brake 190.0 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.4 in (10 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 205mm, 3 stacks, keyed Shaft, SinCos Multiturn 128, Brake, straight, IP54/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"206 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"751.4 lbf.in (84.9 N.m) 115 V single phase 658.5 lbf.in (74.4 N.m) 230 V single phase 448.7 lbf.in (50.7 N.m) 400 V three phase 355.8 lbf.in (40.2 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"10600 W","Mounting Support":"International standard flange","Sizing reference":"SH32053P","Back emf constant":"172 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"2920.7 lbf.in (330 N.m) 115...480 V three phase","Stator inductance":"2.05 mH","Stator resistance":"0.2 Ohm","Maximum current Irms":"136.1 A","Nominal output power":"4450 W 115 V single phase 7790 W 230 V single phase 10620 W 400 V three phase 10100 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"740 N","Output current 3s peak":"136.1 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"835.5 lbf.in (94.4 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"4500 N 1000 rpm 3570 N 2000 rpm 3120 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"33.2 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$10,705.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/47841b82bf8dee72c99beea20d3bc8f8.pdf","sourceUrl":"https://www.se.com/ie/en/product/SH32053P12F1000/sh3-servomotor-205mm-3-stacks-keyed-shaft-sincos-multiturn-128-brake-straight-ip54-65/"},"ai":{"faq":[{"question":"What is SH32053P12F1000's listed phase and length?","answer":"The SH32053P12F1000 is a three-phase motor with an overall length of 21.2 inches (538.5 mm). The shaft length is 3.1 inches (80 mm) with a 1.5-inch (38 mm) diameter and a 0.4-inch (10 mm) parallel key."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32053P12F1000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32053P12F1000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}