{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32053P12F1200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32053P12F1200","canonicalUrl":"https://aoctrl.com/schneider/SH32053P12F1200","factsUrl":"https://aoctrl.com/api/mcp/products/SH32053P12F1200","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric SH3 series SH32053P12F1200 servo motor, three phase, 80 N.m holding torque, 10600 W continuous, 205 mm flange, with holding brake.","salesMarkdown":"## Is the SH32053P12F1200 still active, and what does it actually drive? At 205 mm flange and a 21.2 in (538.5 mm) body length, this motor is sized for the mid-frame machine-tool axis, indexing table, or packaging-line rotary knife — anywhere the load benefits from a continuous 80 N.m and can spike into the 330 N.m peak torque envelope. Continuous stall torque of 94.4 N.m at 115–480 V three phase and peak stall torque of 330 N.m at the same range frame the duty window for the downstream drive sizing. ## Torque envelope, supply rails, and where the drive sits Nominal torque drops as the supply rail rises — 84.9 N.m at 115 V single phase, 74.4 N.m at 230 V single phase, 50.7 N.m at 400 V three phase, and 40.2 N.m at 480 V three phase — because nominal speed rises with voltage (500 / 1000 / 2000 / 2400 rpm respectively). Continuous power is listed at 10600 W, and nominal output power tracks the supply rail — 4450 W at 115 V single phase, 7790 W at 230 V single phase, 10620 W at 400 V three phase, and 10100 W at 480 V three phase. On a 400 V three-phase bus the motor reaches the published continuous-power ceiling, so a drive kVA that matches the 400 V rail is the most efficient pairing. Maximum current is 136.1 A and the 3-second peak output is also 136.1 A — the peak envelope equals the continuous stall ceiling on this frame, which sets the bridge amplifier rating rather than the steady-state RMS demand. Stator resistance is 0.2 Ohm and stator inductance 2.05 mH, so the drive's current-loop bandwidth needs a bus-capable IGBT stage rather than a relay-grade contactor. ## Shaft, flange, and the mechanical envelope Shaft is 38 mm diameter with a parallel key 10 mm wide and 80 mm of usable length, exiting an international standard flange with 14 mm mounting holes and 4 mm centring collar depth. Verify the gearbox or coupling bore before specifying — the shaft diameter is the dimension that mates with the load side, not the flange OD. IP65 on the motor body and shaft bushing, IP67 on the housing — the housing rating permits washdown areas, while the shaft seal is rated only to IP65 so high-pressure hot water jetting must not be directed at the shaft seal face. Cooling is natural convection, so the cabinet must leave clearance around the housing; the rated continuous torque does not assume a fan-cooled surface. Maximum radial load is 4500 N at 1000 rpm, 3570 N at 2000 rpm, and 3120 N at 3000 rpm; maximum axial load is 740 N. Belt drives and pinion mounts must stay inside these envelopes or the bearing life spec collapses regardless of how the torque envelope looks on paper. ## Inertia stack, brake, and what an axis swap adds Back-EMF constant is 172 V/krpm at 20 °C, so peak line-to-line voltage at top speed directly tells the integrator what bus voltage range is required to avoid field weakening. Five motor poles, single-pole-pair-per-phase winding; the electrical frequency at 2400 rpm rises into the audio band and the drive's switching-carrier choice will need to stay above it. ## Supplying the SH32053P12F1200 against a BOM Sizing reference is SH32053P, so any cross-reference inside the same SH3 family matches on that base code — the F1200 suffix here is the configuration stamp for the encoder plus brake package, not a separate performance curve. Replace decisions should stay inside the SH3 SH32053P envelope to keep the drive and gearing aligned.","metaTitle":"SH32053P12F1200 servo motor, 80 N.m, 10600 W","metaDescription":"Schneider Electric SH32053P12F1200 three-phase servo motor, 80 N.m holding torque, 10600 W continuous, 205 mm flange, Hiperface encoder.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32053P12F1200","Length":"21.2 in (538.5 mm)","Inertia":"16.0 kg.cm² of brake 190.0 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.4 in (10 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 205mm, 3 stacks, keyed Shaft, SinCos Multiturn 128, Brake, straight, IP65/67","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"206 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"751.4 lbf.in (84.9 N.m) 115 V single phase 658.5 lbf.in (74.4 N.m) 230 V single phase 448.7 lbf.in (50.7 N.m) 400 V three phase 355.8 lbf.in (40.2 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"10600 W","Mounting Support":"International standard flange","Sizing reference":"SH32053P","Back emf constant":"172 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"2920.7 lbf.in (330 N.m) 115...480 V three phase","Stator inductance":"2.05 mH","Stator resistance":"0.2 Ohm","Maximum current Irms":"136.1 A","Nominal output power":"4450 W 115 V single phase 7790 W 230 V single phase 10620 W 400 V three phase 10100 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Straight connector","Electrical connection":"straight connector","Nbr. of units in pkg.":"1","Number of motor poles":"5","Maximum axial force Fa":"740 N","Output current 3s peak":"136.1 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"835.5 lbf.in (94.4 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"4500 N 1000 rpm 3570 N 2000 rpm 3120 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"33.2 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"{'url': 'https://www.se.com/ca/en/product/download-pdf/SH32053P12F1200?filename=Schneider+Electric_Lexium-52-Motors_SH32053P12F1200.pdf', 'path_name': '15adec800718c3367bb3ace8ea827963.pdf', 'path_url': 'https://s3.lax.sharktech.net/viassion/datasheets/schneider_electric/15adec800718c3367bb3ace8ea827963.pdf', 'status': 1}","sourceUrl":"https://www.se.com/ca/en/product/SH32053P12F1200/sh3-servomotor-205mm-3-stacks-keyed-shaft-sincos-multiturn-128-brake-straight-ip65-67/"},"ai":{"faq":[{"question":"What phase configuration is the SH32053P12F1200 built for?","answer":"It is listed as three phase. The motor publishes torque and power curves across both single-phase and three-phase supply rails (115 V single, 230 V single, 400 V three, 480 V three), so the drive stage and the mains feed need to match at commissioning."},{"question":"What is the body length of the SH32053P12F1200 for cabinet layout?","answer":"Body length is 21.2 in (538.5 mm) including the 205 mm flange and the parallel-key shaft end. The shaft-end protrusion plus the 80 mm shaft length adds further axial clearance to that figure when laying out the gearbox side."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32053P12F1200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32053P12F1200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}