{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32053P12F2000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32053P12F2000","canonicalUrl":"https://aoctrl.com/schneider/SH32053P12F2000","factsUrl":"https://aoctrl.com/api/mcp/products/SH32053P12F2000","rawCanonicalId":null},"summary":{"shortDescription":"SH32053P12F2000 three-phase servo motor, 10600 W continuous power, 330 N.m peak stall torque, IP65, absolute multiturn SinCos Hiperface encoder, holding brake, 1.5 in shaft, 21.2 in length.","salesMarkdown":"## 10600 W continuous — the drive-match number The SH32053P12F2000 is a three-phase servo motor rated for 10600 W continuous power. That is the figure your drive sizing software uses to match the motor to the amplifier — pair it with a drive that can deliver the continuous current at the bus voltage your line runs. Nominal speed depends on the supply you connect: 500 rpm at 115 V single phase, 1000 rpm at 230 V single phase, 2000 rpm at 400 V three phase, 2400 rpm at 480 V three phase. The motor is wound for a wide voltage range, but the rated torque shifts with the winding connection — 751.4 lbf.in at 115 V single phase down to 355.8 lbf.in at 480 V three phase. ## Peak and continuous torque — what the numbers mean for the machine cycle Peak stall torque is 2920.7 lbf.in (330 N.m) across the 115...480 V three-phase range. That is the short-duration overload available for acceleration, deceleration, or clearing a jam — the drive must be programmed to limit the peak current to 136.1 A and the duration to the thermal limit of the motor. Continuous stall torque is 835.5 lbf.in (94.4 N.m) at zero speed. This is the holding torque the motor can sustain without overheating — the holding brake adds another 80 N.m for power-off position holding, so the brake handles the static load while the motor handles the dynamic cycle. ## Mechanical interface — shaft, flange, and mounting envelope The shaft is 1.5 in (38 mm) diameter, 3.1 in (80 mm) long, with a 0.4 in (10 mm) parallel key. The motor flange is 8.07 in (205 mm) with an international standard flange pattern — mounts directly to a standard NEMA or IEC gearbox face without an adapter plate. Overall length is 21.2 in (538.5 mm). The centring collar depth is 0.2 in (4 mm), and the mounting holes are 0.6 in (14 mm) diameter. Allow clearance for the straight connector or the rotatable right-angled connector — the connector orientation can be adjusted on site to fit the cable exit path. IP rating is IP54 at the shaft bushing without the seal ring, IP65 at the motor body and shaft bushing with the seal ring fitted. For washdown or wet environments, specify the seal ring — the motor body itself is sealed to IP65, but the shaft exit is the leak path without the ring. ## Feedback and braking — the control-loop components The encoder is an absolute multiturn SinCos Hiperface type. This is a single-cable feedback protocol that carries position data over a sine/cosine analog channel plus a digital serial link — no separate encoder cable needed if the drive supports Hiperface. The multiturn count tracks absolute position over multiple shaft revolutions, so the machine does not need a home cycle after power loss. The holding brake is rated 80 N.m and is included with the motor. It is a spring-applied, electrically released brake — power to the motor releases the brake; power loss engages it. The brake torque is lower than the continuous stall torque (94.4 N.m), so the brake holds the load stationary when the drive is off, but the motor handles the dynamic torque during motion. The torque constant is 2.84 N.m/A at 248 °F (120 °C) hot copper temperature. The back EMF constant is 172 V/krpm at 68 °F (20 °C). These two constants define the motor's voltage-speed and current-torque relationship — the drive's current loop and velocity loop gains are tuned around them. The motor is part of the SH3 series, with the sizing reference SH32053P. The same part, different passport: genuine is genuine regardless of which authorized region it came from, though the manufacturer warranty may be region-locked.","metaTitle":"SH32053P12F2000 servo motor, 10600 W, 330 N.m peak, IP65","metaDescription":"SH32053P12F2000 three-phase servo motor, 10600 W continuous power, 330 N.m peak stall torque, IP65, absolute multiturn Hiperface encoder, holding brake.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32053P12F2000","Length":"21.2 in (538.5 mm)","Inertia":"16.0 kg.cm² of brake 190.0 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.4 in (10 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 205mm, 3 stacks, keyed Shaft, SinCos Multiturn 128, Brake, angular, IP54/65","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"206 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"751.4 lbf.in (84.9 N.m) 115 V single phase 658.5 lbf.in (74.4 N.m) 230 V single phase 448.7 lbf.in (50.7 N.m) 400 V three phase 355.8 lbf.in (40.2 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"10600 W","Mounting Support":"International standard flange","Sizing reference":"SH32053P","Back emf constant":"172 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"2920.7 lbf.in (330 N.m) 115...480 V three phase","Stator inductance":"2.05 mH","Stator resistance":"0.2 Ohm","Maximum current Irms":"136.1 A","Nominal output power":"4450 W 115 V single phase 7790 W 230 V single phase 10620 W 400 V three phase 10100 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Straight connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"740 N","Output current 3s peak":"136.1 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"835.5 lbf.in (94.4 N.m) 115...480 V three phase","IP degree of protection":"IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5 IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5","Maximum radial force Fr":"4500 N 1000 rpm 3570 N 2000 rpm 3120 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"33.2 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$9,204.96","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/47841b82bf8dee72c99beea20d3bc8f8.pdf","sourceUrl":"https://www.se.com/us/en/product/SH32053P12F2000/sh3-servomotor-205mm-3-stacks-keyed-shaft-sincos-multiturn-128-brake-angular-ip54-65/"},"ai":{"faq":[{"question":"What is the peak stall torque of SH32053P12F2000?","answer":"Peak stall torque is 2920.7 lbf.in (330 N.m) across the 115...480 V three-phase range. This is the short-duration overload capability for acceleration or emergency stops, limited by the 136.1 A peak current."},{"question":"What encoder type does SH32053P12F2000 use?","answer":"The encoder is an absolute multiturn SinCos Hiperface type. It provides absolute position over multiple revolutions via a single-cable feedback protocol — no separate encoder cable needed if the drive supports Hiperface."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32053P12F2000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32053P12F2000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}