{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SH32053P12F2200","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SH32053P12F2200","canonicalUrl":"https://aoctrl.com/schneider/SH32053P12F2200","factsUrl":"https://aoctrl.com/api/mcp/products/SH32053P12F2200","rawCanonicalId":null},"summary":{"shortDescription":"SH32053P12F2200 servo motor, three-phase, 10.6 kW continuous power, 330 N·m peak stall torque, IP65/IP67, absolute multiturn SinCos Hiperface encoder, holding brake, 38 mm shaft, 205 mm flange.","salesMarkdown":"## Motor ratings that set the torque envelope The SH32053P12F2200 is a three-phase servo motor from the SH3 series, delivering 10.6 kW continuous power with a continuous stall torque of 94.4 N·m across the 115–480 V three-phase range. That 94.4 N·m is what the motor holds indefinitely at standstill without overheating — the real-world duty-cycle limit for positioning or clamping applications. Peak stall torque hits 330 N·m (2920.7 lbf·in) on three-phase supply — this is the short-duration (3-second) burst for acceleration or breaking free of a jam. The holding brake adds 80 N·m of static torque for vertical-axis load retention when power is off. Nominal torque varies with supply voltage: 84.9 N·m at 115 V single-phase, 74.4 N·m at 230 V single-phase, 50.7 N·m at 400 V three-phase, and 40.2 N·m at 480 V three-phase. The torque constant is 2.84 N·m/A measured at 120 °C copper temperature — that's the hot winding condition, so the drive's current loop must account for the resistance shift. ## Speed, feedback, and mechanical fit Nominal speed depends on the supply: 500 rpm at 115 V single-phase, 1000 rpm at 230 V single-phase, 2000 rpm at 400 V three-phase, and 2400 rpm at 480 V three-phase. The back EMF constant is 172 V/krpm at 20 °C — a key number for the drive's velocity-loop tuning and bus-voltage headroom. Feedback comes from an absolute multitouch SinCos Hiperface encoder — no homing sequence needed on power-up; the drive reads the exact rotor position. The motor includes a holding brake (80 N·m) for vertical-axis safety. Shaft is 38 mm diameter with a parallel key, 80 mm shaft length, and 10 mm key width — standard for this flange class. Mounting uses an international standard flange (205 mm pilot diameter, 14 mm mounting holes, 4 mm centring collar depth). The electrical connection is a rotatable right-angled connector — useful when cable exit direction needs to clear adjacent hardware in a tight cabinet. ## Environmental sealing and thermal limits IP65 on the motor body and shaft bushing, IP67 on the housing — both per IEC 60034-5. Cooling is natural convection — no fan, so the mounting surface and ambient airflow must carry the heat. Maximum radial force at the shaft is 4500 N at 1000 rpm, derating to 3120 N at 3000 rpm. Maximum axial force is 740 N. These limits govern belt-drive or direct-coupling designs — exceed them and bearing life drops fast. The motor is supplied as a single unit (1 per package). The sizing reference code is SH32053P — useful when ordering matched drive-motor packages from the same series.","metaTitle":"SH32053P12F2200 servo motor, 10.6 kW, 330 N·m peak, IP65","metaDescription":"SH32053P12F2200 servo motor, 10.6 kW continuous, 330 N·m peak stall torque, IP65/IP67, absolute multiturn encoder, holding brake.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Servo Motors with Brake"],"specifications":{"Phase":"Three phase","title":"SH32053P12F2200","Length":"21.2 in (538.5 mm)","Inertia":"16.0 kg.cm² of brake 190.0 kg.cm² of motor","Category":"US1PC5218359","Key width":"0.4 in (10 mm)","Shaft end":"Parallel key","description":"SH3 servomotor, 205mm, 3 stacks, keyed Shaft, SinCos Multiturn 128, Brake, angular, IP65/67","Encoder type":"Absolute multiturn SinCos Hiperface","Shaft length":"3.1 in (80 mm)","Holding brake":"With","Nominal speed":"500 rpm 115 V single phase 1000 rpm 230 V single phase 2000 rpm 400 V three phase 2400 rpm 480 V three phase","Rotor inertia":"206 kg.cm²","Holding torque":"708.06 lbf.in (80 N.m)","Nominal torque":"751.4 lbf.in (84.9 N.m) 115 V single phase 658.5 lbf.in (74.4 N.m) 230 V single phase 448.7 lbf.in (50.7 N.m) 400 V three phase 355.8 lbf.in (40.2 N.m) 480 V three phase","Shaft diameter":"1.5 in (38 mm)","Torque constant":"2.84 N.m/A 248 °F (120 °C)","Type of cooling":"Natural convection","lifecycle_stage":"current","Continuous power":"10600 W","Mounting Support":"International standard flange","Sizing reference":"SH32053P","Back emf constant":"172 V/krpm 68 °F (20 °C)","Device short name":"SH3","Motor flange size":"8.07 in (205 mm)","Peak stall torque":"2920.7 lbf.in (330 N.m) 115...480 V three phase","Stator inductance":"2.05 mH","Stator resistance":"0.2 Ohm","Maximum current Irms":"136.1 A","Nominal output power":"4450 W 115 V single phase 7790 W 230 V single phase 10620 W 400 V three phase 10100 W 480 V three phase","Centring collar depth":"0.2 in (4 mm)","Electrical Connection":"Rotatable right angled connector","Electrical connection":"rotatable right angled connector","Nbr. of units in pkg.":"1","Number of motor poles":"5.0","Maximum axial force Fa":"740 N","Output current 3s peak":"136.1 A","Temperature copper hot":"266 °F (130 °C)","Continuous stall torque":"835.5 lbf.in (94.4 N.m) 115...480 V three phase","IP degree of protection":"IP65 motor: conforming to IEC 60034-5 IP65 shaft bushing: conforming to IEC 60034-5 IP67 housing: conforming to IEC 60034-5","Maximum radial force Fr":"4500 N 1000 rpm 3570 N 2000 rpm 3120 N 3000 rpm","Mounting holes diameter":"0.6 in (14 mm)","Centring collar diameter":"7.09 in (180 mm)","Continuous stall current":"33.2 A","Maximum mechanical speed":"3800 rpm","Network number of phases":"3","Number of mounting holes":"4","Product or Component Type":"Servo motor","Speed feedback resolution":"128 periods","[Us] rated supply voltage":"115...480 V","Circle diameter of the mounting holes":"8.5 in (215 mm)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$8,731.62 – $11,115.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/47841b82bf8dee72c99beea20d3bc8f8.pdf","sourceUrl":"https://www.se.com/us/en/product/SH32053P12F2200/sh3-servomotor-205mm-3-stacks-keyed-shaft-sincos-multiturn-128-brake-angular-ip65-67/"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SH32053P12F2200","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SH32053P12F2200 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-07-22T19:47:38.189Z","lastPublished":"2026-07-22T19:47:38.189Z","indexable":true}}