{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"SSD1A360BDC2","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"SSD1A360BDC2","canonicalUrl":"https://aoctrl.com/schneider/SSD1A360BDC2","factsUrl":"https://aoctrl.com/api/mcp/products/SSD1A360BDC2","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Harmony Solid State Relay, SSD1A360BDC2, 1-phase, 60 A rated, 48-600 VAC output, zero-voltage switching, DIN rail mount, 4-32 VDC control.","salesMarkdown":"## One-phase SSR – the key specs that decide fit This SSD1A360BDC2 is a 60 A one-phase SSR from Schneider’s Harmony line. Zero-voltage switching keeps inrush low – ideal for resistive heater loads or lamp banks. Control voltage spans 4-32 V DC; the input draws 10-15 mA, so it plays nice with standard PLC transistor outputs. dv/dt is rated at 500 V/µs off-state – that’s the spec that keeps it from false-triggering on noisy mains or rail power. Response time is half a cycle on and off, fast enough for most cyclic processes. ## Mounting and wiring – what takes up space on the rail Width is 45 mm (one standard DIN unit), height 111.5 mm, but depth hits 154.4 mm – that’s the measurement to check against enclosure depth. Input terminals accept 0.08-3.3 mm² (AWG 28-12), output clamps take 10-26.67 mm² (AWG 8-3). Tightening torque is 0.5 N·m on control side, 2-2.2 N·m on the power clamps. No test button, but a green LED lights when control voltage is present. ## Lifecycle and compliance – still active, fully certified Lifecycle stage is current – no end-of-life notice. That means standard lead times and no forced last-time-buy. Compliance package includes UL 508, CSA C22.2 No 14-13, IEC 60947-4-3, IEC 62314, IEC 60950-1, and IEC 61373 Class B category 1 for rail vibration and shock. Dielectric strength is 4 kV AC between input/output and case.","metaTitle":"Schneider SSD1A360BDC2 Harmony SSR, 60A, 48-600VAC, DIN","metaDescription":"Active 60A 1-ph SSR. dv/dt 500 V/µs, zero-voltage switching, 4-32 VDC control, DIN rail. Complies with UL 508, CSA, IEC. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"DV/dt":"500 V/µs off-state at maximum rated voltage","Depth":"6.08 in (154.4 mm)","Width":"1.8 in (45 mm)","Height":"4.4 in (111.5 mm)","Category":"US10CP222375","Standards":"IEC 61373:class B: category 1 IEC 60947-4-3 IEC 62314 IEC 60950-1 CSA C22.2 No 14-13 UL 508","Rated duty":"Uninterrupted","Test Button":"Without test button","Load current":"0.15...60 A","Rated Current":"60 A","Response time":"0.5 cycle (turn-on) 0.5 cycle (turn-off)","Inrush current":"1350 A at 60 Hz","Output voltage":"48...600 V AC","Pick-Up Voltage":"4 V DC turn-on","lifecycle_stage":"current","Drop-Out Voltage":"1 V DC turn-off","Local signalling":"LED (green) for control voltage","Mounting support":"35 mm symmetrical DIN rail conforming to IEC 60715","Number of phases":"1 phase","Pollution degree":"2","Range of Product":"Harmony Solid State Relays","Shock resistance":"50 gn for 11 ms (peak acceleration) , longitudinal position conforming to IEC 60068-2-27 30 gn for 11 ms (peak acceleration) , vertical position conforming to IEC 60068-2-27","Device short name":"SSD1","Tightening torque":"0.5 N.m for control input 5 lb.in for control input 2...2.2 N.m for load output 18...20 lb.in for load output","Number of Channels":"1","Device presentation":"Complete product","Dielectric strength":"4 kV AC for input/output circuit 4 kV AC for input or output to case","Flammability rating":"V-0 conforming to UL 94","Input Current Range":"10...15 mA","Operating Frequency":"47...440 Hz","Maximum voltage drop":"<1.2 V on-state","Overvoltage category":"III","Vibration resistance":"0.35 mm (f = 10...150 Hz) conforming to IEC 60068-2-6","Insulation resistance":"1000 MOhm at 500 V DC","Nbr. of units in pkg.":"1","Output switching mode":"Zero voltage switching","Transient Overvoltage":"1200 V","Maximum I2t for fusing":"8320 A².s for 10 ms 7593 A².s for 8.33 ms","Connections - terminals":"Plug-inscrew terminals, clamping connection capacity:0.08...3.30 mm², AWG 28...AWG 12 for input Clamp terminal, clamping connection capacity:10...26.67 mm², AWG 8...AWG 3 for output","Control Circuit Voltage":"4...32 V DC","Device Form Designation":"Form 5 semiconductor output DOL contactor","IP degree of protection":"IP20","Load Power Factor Range":"0.5 with maximum load","Maximum leakage current":"1 mA off-state","Motor Controller Rating":"1.5 kW/2 hp at 120 V AC 3.73 kW/5 hp at 240 V AC 7.46 kW/10 hp at 480 V AC","Product or Component Type":"Modular DIN rail relay","Product configuration type":"Contactor configuration with pluggable screw input","Solid State Switching Type":"Zero voltage switching","Electromagnetic compatibility":"Electrostatic discharge 6 kV criteria A contact discharge conforming to IEC 61000-4-2 Electrostatic discharge 8 kV criteria A air discharge conforming to IEC 61000-4-2 Conducted RF disturbances 10 V, 0.15...80 MHz criteria A level 3 conforming to IEC 61000-4-6 Electrical fast transient/burst immunity test 2 kV, 5/100 kHz criteria B output ports conforming to IEC 61000-4-4 Electrical fast transient/burst immunity test 1 kV, 5/100 kHz criteria B input ports conforming to IEC 61000-4-4 Radiated radio-frequency electromagnetic field immunity test 10 V/m, 80 MHz...1 GHz criteria A conforming to IEC 61000-4-3 Radiated radio-frequency electromagnetic field immunity test 3 V/m, 1.4...2 GHz criteria A conforming to IEC 61000-4-3 Radiated radio-frequency electromagnetic field immunity test 1 V/m, 2...2.7 GHz criteria A conforming to IEC 61000-4-3 Surge immunity test 1 kV criteria B output ports line to line conforming to IEC 61000-4-5 Surge immunity test 2 kV criteria B output ports line to earth conforming to IEC 61000-4-5 Radiated emission environment B for DC input supply conforming to IEC 60947-4-3 Conducted emission environment B for DC input supply conforming to IEC 60947-4-3 Immunity to microbreaks and voltage drops 30 %, 500 ms criteria A conforming to IEC 61000-4-11 Immunity to microbreaks and voltage drops 100 %, 20 ms criteria B conforming to IEC 61000-4-11","Rated Impulse Withstand Voltage":"6 kV for input/output circuit 6 kV for input or output to case","Ambient Air Temperature for Storage":"-40...212 °F (-40...100 °C)","Ambient Air Temperature for Operation":"-40...176 °F (-40...80 °C)","Short Circuit Protection Coordination":"Type 1 Type 2"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$52.07 – $103.09","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/bfef34313615e4ecf23105a158af0cfe.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/SSD1A360BDC2/alternatives.json"},"ai":{"faq":[{"question":"What is the dv/dt rating of this SSR?","answer":"500 V/µs off-state at maximum rated voltage."},{"question":"What are the overall dimensions?","answer":"Width 45 mm, height 111.5 mm, depth 154.4 mm (6.08 in)."},{"question":"What compliance certifications does it carry?","answer":"UL 508, CSA C22.2 No 14-13, IEC 60947-4-3, IEC 62314, IEC 60950-1, and IEC 61373 Class B category 1 for rail shock and vibration."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/SSD1A360BDC2","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/SSD1A360BDC2 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}