{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TA10D2L0323TPE","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"TA10D2L0323TPE","canonicalUrl":"https://aoctrl.com/schneider/TA10D2L0323TPE","factsUrl":"https://aoctrl.com/api/mcp/products/TA10D2L0323TPE","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TransferPacT TA10D2L0323TPE, automatic transfer switch, 32 A, 2-pole, AC-33B, IEC 60947-6-1, fixed mount, LCD display, 4 push-buttons.","salesMarkdown":"The Schneider Electric TA10D2L0323TPE is an automatic transfer switch from the TransferPacT range, rated 32 A continuous with a 2-pole configuration. It switches between two AC supply sources (mains and backup) automatically or manually, with a utilization category of AC-33B per IEC 60947-6-1 — meaning it handles mixed motor and resistive loads including occasional switching of individual motors up to the rated current. The 32 A thermal current (Ith) at 60 °C is the same as the operational current, so no derating for continuous duty in a warm enclosure. AC-33B is the key selection parameter: it covers switching of mixed loads including motors, resistive heating, and lighting under occasional starting conditions. The 32 A rating at 230 V AC means this unit handles a 7.36 kW single-phase load at nominal voltage. The short-time withstand current (Icw) of 5 kA for 0.1 s tells you the switch can ride through a fault until an upstream breaker clears — but the making capacity (Icm) of 15 kA at 400 V AC (switch alone) or 75 kA with an upstream protection breaker defines the maximum fault it can close into without damage. For isolation duty, the switch is marked suitable for isolation and includes a padlockable OFF position, meeting the lockout/tagout requirement for a service disconnect. The 2-pole (2P) configuration switches both line and neutral on a single-phase system. The front face carries IP40 in auto mode (tools and small wires stay out) and IP20 inside the enclosure in manual mode (finger-safe only). The 310 mm width and 147 mm height mean it occupies roughly 12 inches of panel width — plan the backplate layout accordingly. Connection pitch is 18 mm, which matches standard terminal block spacing for the screw-clamp terminals on both the upside (source) and downside (load) connections. Depth of 94 mm leaves room behind a 120 mm deep enclosure for wiring bends. The LCD screen and four push-buttons give local status and control without opening the door in auto mode.","metaTitle":"Schneider Electric TA10D2L0323TPE TransferPacT ATS, 32 A, 2P","metaDescription":"Schneider Electric TA10D2L0323TPE automatic transfer switch, 32 A rated, 2-pole, AC-33B utilization category, IEC 60947-6-1. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["2-Pole MCB (DIN Rail)"],"specifications":{"Depth":"94 mm","Width":"310 mm","title":"TA10D2L0323TPE","Height":"147 mm","Standards":"IEC 60947-6-1","Rated duty":"Uninterrupted","description":"active automatic transfer switch. TransferPacT Active automatic. 32A. 2P. LCD. frame 100A","Control type":"4 push-buttons","Display type":"LCD screen","Network type":"AC","Mounting mode":"Fixed","Operating mode":"Automatic Manual","lifecycle_stage":"current","Connection pitch":"18 mm","Mounting support":"Plate DIN rail","Pollution degree":"3","Range of product":"TransferPacT","Network frequency":"50/60 Hz","Poles description":"2P","Upside connection":"Screwed","Device application":"Change source of supply","Downside connection":"Screwed","Utilization category":"AC-33B","Mechanical durability":"8000 cycles","Transfer switch class":"PC","IP degree of protection":"Front face: IP40 auto mode Inside the enclosure: IP20 manual mode","Mechanical interlocking":"With mechanical interlocking","Product or component type":"Automatic transfer switch","Suitability for isolation":"Yes","Contact position indicator":"Yes","Number of contact position":"3","Locking options description":"Padlock in OFF position","Signal contacts composition":"1 NO + 2 NC 1 NC + 2 NO 2 NO","[Ui] rated insulation voltage":"Switch: 800 V Controller: 500 V","[Ie] rated operational current":"32 A","[Ue] rated operational voltage":"230 V AC 50/60 Hz","Ambient air temperature for storage":"-40...85 °C","Ambient air temperature for operation":"-25...70 °C","[Uimp] rated impulse withstand voltage":"Switch: 6 kV Controller: 6 kV","[Icw] rated short-time withstand current":"5 kA during 0.1 s","[Icm] rated short-circuit making capacity":"15 kA switch-disconnector alone 400 V AC at 50 Hz 75 kA with upstream protection circuit breaker 400 V AC at 50 Hz","[Ith] conventional free air thermal current":"32 A at 60 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$658.05 – $1,115.33","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/fb7672b8cc926406dff0e4810f6083fd.pdf","sourceUrl":"https://www.se.com/za/en/product/TA10D2L0323TPE/active-automatic-transfer-switch-transferpact-active-automatic-32a-2p-lcd-frame-100a/"},"ai":{"faq":[{"question":"What is TA10D2L0323TPE used for?","answer":"It is an automatic transfer switch (ATS) that changes the source of supply between a primary and backup AC power source, rated for 32 A at 230 V AC in single-phase systems with mixed motor and resistive loads (AC-33B)."},{"question":"What are the key ratings of TA10D2L0323TPE?","answer":"Rated operational current 32 A, rated operational voltage 230 V AC, 2-pole, utilization category AC-33B, short-time withstand current 5 kA for 0.1 s, making capacity 15 kA (switch alone) or 75 kA with upstream breaker, mechanical durability 8000 cycles."},{"question":"Where can I buy TA10D2L0323TPE?","answer":"This part is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — submit an RFQ for a firm commitment."},{"question":"What compliance documentation does TA10D2L0323TPE carry?","answer":"The switch is designed to IEC 60947-6-1 (the standard for automatic transfer switches). The evidence does not list RoHS, REACH, or UL documentation specifically, but the IEC standard covers the electrical safety and performance requirements for this class of equipment."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/TA10D2L0323TPE","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/TA10D2L0323TPE when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}