{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TA10D3L0804TPE","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"TA10D3L0804TPE","canonicalUrl":"https://aoctrl.com/schneider/TA10D3L0804TPE","factsUrl":"https://aoctrl.com/api/mcp/products/TA10D3L0804TPE","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TransferPacT TA10D3L0804TPE, automatic transfer switch, 80 A, 400 V AC, 3P, PC class, IEC 60947-6-1.","salesMarkdown":"The Schneider Electric TA10D3L0804TPE is an automatic transfer switch from the TransferPacT range, designed to change the source of supply between two AC feeds — typically mains and generator or mains and mains — without interrupting the load. Rated 80 A at 400 V AC 50/60 Hz, it handles uninterrupted duty in AC-32B utilization category, which covers mixed resistive and moderate motor loads common in commercial and light industrial backup power schemes. It is a PC-class transfer switch (IEC 60947-6-1), meaning it is tested for both making and breaking load current but not for fault interruption — upstream protection (a circuit breaker or fuse) clears any downstream fault. The 3-pole configuration suits three-phase systems; the switch includes mechanical interlocking to prevent both sources closing simultaneously. Short-time withstand (Icw) is 5 kA for 0.1 s, which tells you the switch can ride through a fault until the upstream breaker clears, provided the let-through energy stays below that threshold. Making capacity (Icm) is 15 kA for the switch-disconnector alone at 400 V AC, rising to 75 kA when paired with an upstream protection circuit breaker. That 75 kA figure is the coordination rating — it means the switch can close onto a fault and survive until the breaker opens, which is critical for generator transfer schemes where the switch might close onto a bolted fault. Impulse withstand (Uimp) is 6 kV for both switch and controller, adequate for surge environments in standard distribution panels. ## Mounting and enclosure integration The 310 mm width and 147 mm height mean it occupies roughly the footprint of a 3-pole MCCB; plan for that space in the enclosure layout. Front face is IP40 in auto mode (tools required to access terminals), and IP20 inside the enclosure in manual mode — adequate for indoor panel use, not for washdown environments. Connection is screwed terminals top and bottom, so expect to torque according to the manufacturer's specification. The switch includes a padlockable OFF position and a contact position indicator showing all three pole states. Signal contacts are configurable as 1 NO + 2 NC or 1 NC + 2 NO or 2 NO — wire these to the building management system or generator controller for status feedback.","metaTitle":"Schneider Electric TA10D3L0804TPE TransferPacT ATS, 80 A, 3P","metaDescription":"Schneider Electric TA10D3L0804TPE TransferPacT automatic transfer switch, 80 A rated, 400 V AC, 3-pole, IEC 60947-6-1. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Miniature Circuit Breakers (MCB)"],"specifications":{"Depth":"94 mm","Width":"310 mm","title":"TA10D3L0804TPE","Height":"147 mm","Standards":"IEC 60947-6-1","Rated duty":"Uninterrupted","description":"active automatic transfer switch, TransferPacT Active automatic, 80A, 3P, LCD, frame 100A","Control type":"4 push-buttons","Display type":"LCD screen","Network type":"AC","Mounting mode":"Fixed","Operating mode":"Automatic Manual","lifecycle_stage":"current","Connection pitch":"18 mm","Mounting support":"Plate DIN rail","Pollution degree":"3","Range of product":"TransferPacT","Network frequency":"50/60 Hz","Poles description":"3P","Upside connection":"Screwed","Device application":"Change source of supply","Downside connection":"Screwed","Utilization category":"AC-32B","Mechanical durability":"8000 cycles","Transfer switch class":"PC","IP degree of protection":"Front face: IP40 auto mode Inside the enclosure: IP20 manual mode","Mechanical interlocking":"With mechanical interlocking","Product or component type":"Automatic transfer switch","Suitability for isolation":"Yes","Contact position indicator":"Yes","Number of contact position":"3","Locking options description":"Padlock in OFF position","Signal contacts composition":"1 NO + 2 NC 1 NC + 2 NO 2 NO","[Ui] rated insulation voltage":"Switch: 800 V Controller: 500 V","[Ie] rated operational current":"80 A","[Ue] rated operational voltage":"400 V AC 50/60 Hz","Ambient air temperature for storage":"-40...85 °C","Ambient air temperature for operation":"-25...70 °C","[Uimp] rated impulse withstand voltage":"Switch: 6 kV Controller: 6 kV","[Icw] rated short-time withstand current":"5 kA during 0.1 s","[Icm] rated short-circuit making capacity":"15 kA switch-disconnector alone 400 V AC at 50 Hz 75 kA with upstream protection circuit breaker 400 V AC at 50 Hz","[Ith] conventional free air thermal current":"80 A at 60 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$802.92 – $1,416.37","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/13d15bc75ca2c41ec694f7ab72450c68.pdf","sourceUrl":"https://www.se.com/vn/en/product/TA10D3L0804TPE/active-automatic-transfer-switch-transferpact-active-automatic-80a-3p-lcd-frame-100a/"},"ai":{"faq":[{"question":"What are the key ratings of the TA10D3L0804TPE?","answer":"The TA10D3L0804TPE is rated 80 A at 400 V AC, 3-pole, with a short-time withstand of 5 kA for 0.1 s and a making capacity of 15 kA alone or 75 kA with upstream protection."},{"question":"Where can I buy the TA10D3L0804TPE?","answer":"The TA10D3L0804TPE is sourced and quoted to order against an RFQ through independent distribution; availability and current pricing are confirmed at quote time."},{"question":"What is the TA10D3L0804TPE used for?","answer":"It is an automatic transfer switch used to change the source of supply between two AC feeds, typically in backup power schemes for commercial or light industrial facilities."},{"question":"What compliance standards does the TA10D3L0804TPE meet?","answer":"It complies with IEC 60947-6-1 for transfer switches and carries a pollution degree 3 rating for industrial environments."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/TA10D3L0804TPE","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/TA10D3L0804TPE when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}