{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TA10D3S0324TPE","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"TA10D3S0324TPE","canonicalUrl":"https://aoctrl.com/schneider/TA10D3S0324TPE","factsUrl":"https://aoctrl.com/api/mcp/products/TA10D3S0324TPE","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TransferPacT TA10D3S0324TPE, automatic transfer switch, 32 A, 3 poles, 400 V AC, PC class per IEC 60947-6-1, uninterrupted duty, rotary selector switch control.","salesMarkdown":"The TA10D3S0324TPE is a Schneider Electric TransferPacT automatic transfer switch (ATS) rated 32 A at 400 V AC, 50/60 Hz, in a 3-pole configuration. It is classified as a PC-class transfer switch per IEC 60947-6-1, meaning it is designed for uninterrupted duty — it switches between normal and emergency sources without a neutral position, and it is suitable for isolation (the contacts provide visible gap indication). The AC-33B utilization category covers motor, resistive, and mixed loads up to 32 A, so it handles starting inrush from small motors and lighting banks on the same circuit. The short-time withstand rating (Icw) is 5 kA for 0.1 s, and the making capacity (Icm) reaches 15 kA for the switch-disconnector alone at 400 V AC, or 75 kA when paired with an upstream circuit breaker. That 75 kA figure tells you the ATS is designed to coordinate with a breaker in a high-fault panel — it will close into a fault without welding contacts, provided the upstream device clears within its ratings. The front face carries IP40 in auto mode (finger-safe against tools >1 mm), while the interior enclosure side is IP20 — suitable for a closed panel, not for washdown areas. The connection pitch is 18 mm, and both upside and downside connections are screwed terminals — no special tooling needed for a panel builder. Overall dimensions: 310 mm wide, 147 mm high, 94 mm deep. The rotary knob selector switch offers automatic and manual operating modes. Mechanical interlocking between the normal and emergency contactors prevents both sources from closing simultaneously — a code requirement for any transfer switch feeding life-safety or critical process loads. A padlock provision on the OFF position allows lockout/tagout for maintenance. ## What compliance documentation to expect The switch is designed and tested to IEC 60947-6-1, the international standard for automatic transfer switches. The standard covers making, breaking, and short-circuit performance under the declared utilization categories. For a procurement pack, expect the manufacturer's declaration of conformity to the Low Voltage Directive (2014/35/EU) and the relevant harmonized standards. RoHS and REACH compliance documentation is typically included in the product technical file available from the supplier upon request.","metaTitle":"Schneider Electric TA10D3S0324TPE TransferPacT ATS, 32A, 3P,","metaDescription":"Schneider Electric TA10D3S0324TPE TransferPacT automatic transfer switch, 32A, 3P, 400V AC, IEC 60947-6-1, PC class, uninterrupted duty. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Miniature Circuit Breakers (MCB)"],"specifications":{"Depth":"94 mm","Width":"310 mm","title":"TA10D3S0324TPE","Height":"147 mm","Standards":"IEC 60947-6-1","Rated duty":"Uninterrupted","description":"automatic transfer switch, TransferPacT automatic, 32A, 3P, rotary, frame 100A","Control type":"Rotary knob Selector switch","Network type":"AC","Mounting mode":"Fixed","Operating mode":"Automatic Manual","lifecycle_stage":"current","Connection pitch":"18 mm","Mounting support":"Plate DIN rail","Pollution degree":"3","Range of product":"TransferPacT","Network frequency":"50/60 Hz","Poles description":"3P","Upside connection":"Screwed","Device application":"Change source of supply","Downside connection":"Screwed","Utilization category":"AC-33B","Mechanical durability":"8000 cycles","Transfer switch class":"PC","IP degree of protection":"Front face: IP40 auto mode Inside the enclosure: IP20 manual mode","Mechanical interlocking":"With mechanical interlocking","Product or component type":"Automatic transfer switch","Suitability for isolation":"Yes","Contact position indicator":"Yes","Number of contact position":"3","Locking options description":"Padlock in OFF position","Signal contacts composition":"1 NO + 2 NC 1 NC + 2 NO 2 NO","[Ui] rated insulation voltage":"Switch: 800 V Controller: 500 V","[Ie] rated operational current":"32 A","[Ue] rated operational voltage":"400 V AC 50/60 Hz","Ambient air temperature for storage":"-40...85 °C","Ambient air temperature for operation":"-25...70 °C","[Uimp] rated impulse withstand voltage":"Switch: 6 kV Controller: 6 kV","[Icw] rated short-time withstand current":"5 kA during 0.1 s","[Icm] rated short-circuit making capacity":"15 kA switch-disconnector alone 400 V AC at 50 Hz 75 kA with upstream protection circuit breaker 400 V AC at 50 Hz","[Ith] conventional free air thermal current":"32 A at 60 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$584.96 – $982.19","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/c157aec19bf34e1aeecb8c974d4846c1.pdf","sourceUrl":"https://www.se.com/vn/en/product/TA10D3S0324TPE/automatic-transfer-switch-transferpact-automatic-32a-3p-rotary-frame-100a/"},"ai":{"faq":[{"question":"Where can I buy the TA10D3S0324TPE and how is it quoted?","answer":"This part is sourced and quoted to order against an RFQ through independent industrial distribution. Availability and current pricing are confirmed at quote time — send an RFQ with your target quantity and delivery window."},{"question":"What is the closest alternative to the TA10D3S0324TPE in the TransferPacT family?","answer":"Within the TransferPacT range, the closest functional sibling would be a 40 A or 63 A 3-pole variant with the same PC class and AC-33B rating. The difference is the rated operational current — the TA10D3S0324TPE is sized for 32 A loads, while a higher-rated unit would be needed for larger feeders. Pin compatibility (mounting footprint, connection pitch, and terminal layout) varies by frame size, so verify the physical dimensions against your panel layout before substituting."},{"question":"What are the key ratings of the TA10D3S0324TPE?","answer":"Rated operational current 32 A, rated operational voltage 400 V AC 50/60 Hz, 3 poles, PC class per IEC 60947-6-1, utilization category AC-33B, short-time withstand current 5 kA for 0.1 s, making capacity 15 kA alone or 75 kA with upstream breaker."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/TA10D3S0324TPE","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/TA10D3S0324TPE when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}