{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TA10D3S1004TPE","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"TA10D3S1004TPE","canonicalUrl":"https://aoctrl.com/schneider/TA10D3S1004TPE","factsUrl":"https://aoctrl.com/api/mcp/products/TA10D3S1004TPE","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric TransferPacT automatic transfer switch, TA10D3S1004TPE, 100A, 3P, 400V AC, rotary selector, PC class per IEC 60947-6-1.","salesMarkdown":"The Schneider Electric TA10D3S1004TPE is an automatic transfer switch from the TransferPacT range, rated 100 A continuous on a 400 V AC 50/60 Hz network. It is a PC-class switch per IEC 60947-6-1, meaning it is designed for full-rated current switching of the supply source without overcurrent protection built in — the upstream breaker handles fault clearing. The AC-32B utilization category confirms it is suited for mixed resistive and inductive loads including motors up to the rated current, under uninterrupted duty. The 5 kA short-time withstand for 0.1 s and a making capacity of 15 kA (switch alone) or 75 kA with an upstream breaker tell you the switch can close onto a fault and survive the let-through of a coordinated breaker. The 310 mm width and 147 mm height mean it occupies a full-width slot in a standard 600 mm enclosure — plan the gland plate and busbar routing accordingly. The front face carries IP40 in auto mode, the interior enclosure side is IP20, so the switch itself is not sealed against washdown; it belongs in a dry cabinet. The screwed connections (top and bottom) accept standard lug terminations; verify lug width against the 18 mm pole pitch before terminating. ## Key ratings and their meaning for fit The 800 V rated insulation voltage on the switch side and 500 V on the controller side mean the switch can be used on 480 V systems (common in North America) as well as the listed 400 V, provided the controller supply stays within its 500 V limit. The 6 kV impulse withstand voltage on both sides confirms it handles transient overvoltages in industrial distribution without flashover. Mechanical interlocking between the two source positions is built in, preventing both sources from closing simultaneously — a requirement for any open-transition transfer switch. The padlockable OFF position and contact position indicator give the isolating function a verifiable air gap for lockout/tagout. The 8000-cycle mechanical durability is typical for a PC-class ATS — plan for replacement after roughly 20 years of weekly testing, or sooner under frequent transfer events.","metaTitle":"Schneider Electric TA10D3S1004TPE TransferPacT ATS, 100A, 3P","metaDescription":"Schneider Electric TA10D3S1004TPE automatic transfer switch, TransferPacT, 100A, 3P, 400V AC, IEC 60947-6-1. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Miniature Circuit Breakers (MCB)"],"specifications":{"Depth":"94 mm","Width":"310 mm","title":"TA10D3S1004TPE","Height":"147 mm","Standards":"IEC 60947-6-1","Rated duty":"Uninterrupted","description":"automatic transfer switch, TransferPacT automatic, 100A, 3P, rotary, frame 100A","Control type":"Rotary knob Selector switch","Network type":"AC","Mounting mode":"Fixed","Operating mode":"Automatic Manual","lifecycle_stage":"current","Connection pitch":"18 mm","Mounting support":"Plate DIN rail","Pollution degree":"3","Range of product":"TransferPacT","Network frequency":"50/60 Hz","Poles description":"3P","Upside connection":"Screwed","Device application":"Change source of supply","Downside connection":"Screwed","Utilization category":"AC-32B","Mechanical durability":"8000 cycles","Transfer switch class":"PC","IP degree of protection":"Front face: IP40 auto mode Inside the enclosure: IP20 manual mode","Mechanical interlocking":"With mechanical interlocking","Product or component type":"Automatic transfer switch","Suitability for isolation":"Yes","Contact position indicator":"Yes","Number of contact position":"3","Locking options description":"Padlock in OFF position","Signal contacts composition":"1 NO + 2 NC 1 NC + 2 NO 2 NO","[Ui] rated insulation voltage":"Switch: 800 V Controller: 500 V","[Ie] rated operational current":"100 A","[Ue] rated operational voltage":"400 V AC 50/60 Hz","Ambient air temperature for storage":"-40...85 °C","Ambient air temperature for operation":"-25...70 °C","[Uimp] rated impulse withstand voltage":"Switch: 6 kV Controller: 6 kV","[Icw] rated short-time withstand current":"5 kA during 0.1 s","[Icm] rated short-circuit making capacity":"15 kA switch-disconnector alone 400 V AC at 50 Hz 75 kA with upstream protection circuit breaker 400 V AC at 50 Hz","[Ith] conventional free air thermal current":"100 A at 60 °C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$676.65 – $982.19","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/80206a24abbbc9cd65ca9793a893f7c6.pdf","sourceUrl":"https://www.se.com/ae/en/product/TA10D3S1004TPE/automatic-transfer-switch-transferpact-automatic-100a-3p-rotary-frame-100a/"},"ai":{"faq":[{"question":"What are the key ratings of TA10D3S1004TPE?","answer":"The TA10D3S1004TPE is a 100 A, 3-pole automatic transfer switch rated for 400 V AC 50/60 Hz, PC class per IEC 60947-6-1. It has a 5 kA short-time withstand for 0.1 s and a making capacity of 15 kA (switch alone) or 75 kA with upstream protection."},{"question":"Where can I buy TA10D3S1004TPE and how is it quoted?","answer":"The TA10D3S1004TPE is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time."},{"question":"What compliance documentation does Schneider provide for TA10D3S1004TPE?","answer":"The TA10D3S1004TPE is designed and tested to IEC 60947-6-1, the standard for automatic transfer switches. The manufacturer provides a declaration of conformity covering the applicable IEC and EN standards; specific RoHS, REACH, and UL documentation should be requested at quote time to match your project's compliance requirements."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/TA10D3S1004TPE","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/TA10D3S1004TPE when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}