{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"TM5SDO2DTRFS","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"TM5SDO2DTRFS","canonicalUrl":"https://aoctrl.com/schneider/TM5SDO2DTRFS","factsUrl":"https://aoctrl.com/api/mcp/products/TM5SDO2DTRFS","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Modicon TM5 discrete output module, 2 relay N.O., 24 V DC / 230 V AC, 6 A per channel, safety-rated SIL 3 / PL e.","salesMarkdown":"The TM5SDO2DTRFS is a Modicon TM5 discrete output module from Schneider Electric, giving you two relay outputs rated at 6 A per channel on a common terminal, switchable from 5 to 230 V AC or 5 to 24 V DC. It fits a single-width 25 mm slot on the TM5 backplane. This module carries a safety integrity level of SIL 3 per IEC 61508 and IEC 62061, and PL e per EN 13849-1—so if your machine safety circuit calls for that rating, this block delivers it with a response time of 50 ms or less. The reliability data shows MTTFd over 100 years and PFH below 1E-9. The module is rated for operation in a 0 to 55 °C horizontal installation without derating, 0 to 60 °C with derating. Pollution degree 2, IP20 enclosure, and it passes 15 gn shock and 1 gn vibration on DIN rail. ## Fit and key ratings – what matters for swap 25 mm wide, 75 mm deep, 99 mm high. One wire per output terminal. Electrically: 6 A per channel, resistive load curve. If your load exceeds 6 A per relay, this module is not a fit. The relay contacts are N.O. only (2 form A). No N.C. contact on board. Use for on/off control of solenoids, contactors, indicator lamps, or low-power motors via an external contactor. Safety architecture: if you need SIL 3 / PL e in your system, this module meets those targets. The PFD (<1E-5) and PFH (<1E-9) are diagnostics-friendly. Ensure your safety PLC or controller can accept the 50 ms response time in the safety function timing budget. The 2.3 W power dissipation is moderate. In a densely packed cabinet with limited airflow, that heat adds up; derate the ambient by 5 °C if the module is sandwiched between two high-power slices.","metaTitle":"Schneider TM5SDO2DTRFS Modicon TM5 Relay Output, 2×6A, Obsol","metaDescription":"TM5SDO2DTRFS – Modicon TM5 2-relay output module, 6A/ch, 24V DC/230V AC, SIL3/PL e. Obsolete; sourced to order against RFQ. DIN-rail mount, 25mm wide.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":[],"specifications":{"Depth":"3.0 in (75 mm)","Width":"1.0 in (25 mm)","Height":"3.9 in (99 mm)","Marking":"CE","Category":"US1PC5218360","Standards":"IEC 61508 UL 508 EN 13849-1 IEC 62061","Safety level":"SIL 3 IEC 61508 SIL 3 IEC 62061 PL = e EN 13849-1","Response time":"<= 50 ms","lifecycle_stage":"current","Pollution degree":"2","Range of Product":"Modicon TM5","Shock resistance":"15 gn 11 ms","Relative humidity":"5...95 % without condensation","Operating altitude":"0...6561.68 ft (0...2000 m)","Current per channel":"6 A","Vibration resistance":"1 gn 8.4...150 Hz) on DIN rail 3.5 mm 5...8.4 Hz) on DIN rail","Electrical Connection":"1 wire","Nbr. of units in pkg.":"1","Discrete output number":"2","Power dissipation in W":"2.3 W","Discrete output voltage":"24 V DC 5...230 V)relay 230 V AC 5...24 V)","IP Degree of Protection":"IP20","Safety reliability data":"MTTFd > 100 years PFD < 1E-5 PFH < 1E-9 B10d = 780000 B10d = 1960000","Product or Component Type":"Discrete output module","Electromagnetic compatibility":"Electrostatic discharge immunity test, 4 kV on contact IEC 61000-4-2 Electrostatic discharge immunity test, 8 kV in air IEC 61000-4-2 Susceptibility to electromagnetic fields, 1 V/m 2...2.7 GHz IEC 61000-4-3 Susceptibility to electromagnetic fields, 10 V/m 80...2000 MHz IEC 61000-4-3 Electrical fast transient/burst immunity test, 1 kV I/O IEC 61000-4-4 Electrical fast transient/burst immunity test, 1 kV shielded cable IEC 61000-4-4 Electrical fast transient/burst immunity test, 2 kV power lines IEC 61000-4-4 1.2/50 µs shock waves immunity test, 0.5 kV differential mode IEC 61000-4-5 1.2/50 µs shock waves immunity test, 1 kV common mode IEC 61000-4-5 Conducted RF disturbances IEC 61000-4-6 Conducted and radiated emissions CISPR 11","Ambient air temperature for storage":"-40...158 °F (-40...70 °C)","Complementary/Discrete output number":"2 relay at 24 V DC at 230 V AC","Ambient air temperature for operation":"32...122 °F (0...50 °C) vertical installation) 32...131 °F (0...55 °C) without derating horizontal installation) 32...140 °F (0...60 °C) with derating factor horizontal installation)"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$774.00 – $1,440.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/1d7257103a9fbea1bd2fc319cb37d34e.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/TM5SDO2DTRFS/alternatives.json"},"ai":{"faq":[{"question":"What are the key electrical ratings of the TM5SDO2DTRFS?","answer":"Two relay outputs, each rated 6 A continuous, switching 5–230 V AC or 5–24 V DC. The module is safety-rated SIL 3 / PL e with a response time of 50 ms or less."},{"question":"What compliance documentation does the TM5SDO2DTRFS carry?","answer":"The module carries CE marking and is listed to IEC 61508, UL 508, EN 13849-1, and IEC 62061. EMC immunity and emissions per IEC 61000-4-2 through -6 and CISPR 11 are specified in the technical data."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/TM5SDO2DTRFS","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/TM5SDO2DTRFS when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:21:01.794Z","lastPublished":"2026-09-02T08:21:01.794Z","indexable":true}}