{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"VW3A83CDG050","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"VW3A83CDG050","canonicalUrl":"https://aoctrl.com/schneider/VW3A83CDG050","factsUrl":"https://aoctrl.com/api/mcp/products/VW3A83CDG050","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar Process Modular, accessory cable, GG45 Digi-Link, 5 m, 1 cable, connects power module to control unit.","salesMarkdown":"The Schneider VW3A83CDG050 is a 5-meter GG45 Digi-Link cable used to connect the power module to the control unit in an Altivar Process Modular single-drive architecture. The GG45 connector is purpose-made for the Altivar Process Modular backplane — it's not a standard RJ45 patch cable. The 5-meter length gives you enough reach to separate the power stack from the control head in a typical cabinet layout without excess coil. This cable carries the Digi-Link communication between modules, so using the correct GG45 type avoids signal integrity issues that a generic Ethernet cable could introduce. If you're freezing a BOM or stocking spares for a line that uses these drives, this cable is a straight drop-in; no revision change or alternate part number to track right now. In a single-drive architecture, the power module and control unit are separate physical units. This cable bridges the two — typically routed through a wire duct or cable tray inside the enclosure. The 5-meter length is generous enough for a standard 800 mm wide cabinet with the modules stacked vertically.","metaTitle":"Schneider VW3A83CDG050 GG45 Digi-Link Cable, 5m, Altivar Pro","metaDescription":"Schneider VW3A83CDG050 GG45 Digi-Link cable, 5m, for Altivar Process Modular drives. Connects power module to control unit. Active production. Request RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Motor Control Accessories"],"specifications":{"title":"VW3A83CDG050","Length":"5 m","description":"GG45 Digi-Link cable, Altivar Process Modular, 5m","Type of cable":"GG45","lifecycle_stage":"mature","Number of cables":"1","Range of product":"Altivar Process Modular","Device application":"To connect the power module to the control unit","Accessory / separate part type":"Cable","Accessory / separate part category":"Cabling accessory","Accessory / separate part destination":"Single drive architecture"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/1288c3091995693090bf5cb8a84ed80d.pdf","sourceUrl":"https://www.se.com/ca/en/product/VW3A83CDG050/gg45-digilink-cable-altivar-process-modular-5m/"},"ai":{"faq":[{"question":"What is the VW3A83CDG050 used for?","answer":"It connects the power module to the control unit in an Altivar Process Modular single-drive architecture. It's a GG45 Digi-Link cable, 5 meters long."},{"question":"Where can I buy the VW3A83CDG050?","answer":"This part is sourced and quoted to order against an RFQ. Availability and current pricing are confirmed at quote time through independent distribution channels."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/VW3A83CDG050","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/VW3A83CDG050 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}