{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"VW3L1V300","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"VW3L1V300","canonicalUrl":"https://aoctrl.com/schneider/VW3L1V300","factsUrl":"https://aoctrl.com/api/mcp/products/VW3L1V300","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric, commissioning cable, VW3L1V300, USB to SPI for Lexium integrated drive, 3.6 m cable length, active lifecycle.","salesMarkdown":"The Schneider Electric VW3L1V300 is a commissioning USB to SPI cable purpose-built for Lexium integrated drives, with a 3.6 m cable length that reaches from the drive to a laptop on the cabinet door or nearby cart — no extension needed for typical panel-side programming. One end terminates in a standard USB connector for the PC; the other carries a 10-pin connector that mates to the drive's commissioning port. Communication uses a pulse/direction interface, which is the native protocol for setting and programming drive parameters through the manufacturer's software. For the commissioning engineer: plug the USB end into a laptop running the drive's configuration tool, connect the 10-pin end to the drive's programming port, and the software enumerates the drive over the SPI bridge. The 3.6 m length gives enough slack to work from a rolling cart without pulling the drive out of the cabinet.","metaTitle":"Schneider Electric VW3L1V300 Commissioning USB to SPI Cable,","metaDescription":"Schneider Electric VW3L1V300 commissioning USB to SPI cable for Lexium integrated drive, 3.6 m. Active lifecycle. Quoted to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Motor Control Accessories"],"specifications":{"title":"VW3L1V300","description":"commissioning USB to SPI cable - for Lexium integrated drive - 3.6 m","Cable length":"3.6 m","lifecycle_stage":"mature","Electrical connection":"1 connector USB for PC 1 connector, 10 pins for integrated drive","Communication interface":"Pulse/direction","Product specific application":"To set/program communication parameters","Accessory / separate part type":"Cable","Accessory / separate part category":"Connection accessory","Accessory / separate part destination":"For Lexium integrated drive"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/d49229f429edd00167b63925c483ca4d.pdf","sourceUrl":"https://www.se.com/ie/en/product/VW3L1V300/commissioning-usb-to-spi-cable-for-lexium-integrated-drive-3-6-m/"},"ai":{"faq":[{"question":"What is the cable length of VW3L1V300?","answer":"The VW3L1V300 has a cable length of 3.6 m, which is sufficient for connecting a laptop to the drive's commissioning port from a nearby work surface or cart."},{"question":"Where can I buy VW3L1V300 and how is it quoted?","answer":"The VW3L1V300 is sourced and quoted to order against an RFQ through independent distribution channels. Availability and current pricing are confirmed at quote time."},{"question":"What connectors does VW3L1V300 use?","answer":"One end has a standard USB connector for the PC; the other end has a 10-pin connector that mates to the Lexium integrated drive's commissioning port."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/VW3L1V300","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/VW3L1V300 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}