{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"VW3L2F001R30","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"VW3L2F001R30","canonicalUrl":"https://aoctrl.com/schneider/VW3L2F001R30","factsUrl":"https://aoctrl.com/api/mcp/products/VW3L2F001R30","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Altivar accessory, pre-assembled cable kit for fieldbus interfaces and power supply, CANopen, 3 m.","salesMarkdown":"The VW3L2F001R30 is a pre-assembled cable kit that bundles the fieldbus and power connections for a Schneider Altivar drive into one harness. It carries CANopen communication on one end via an RJ45 connector that plugs into the drive's printed circuit board connector, and breaks out to a SUB-D 9-pin for the fieldbus network plus a cable end for the 24 V power supply. The 3 m length gives enough slack to route from the drive to a nearby cabinet gland plate or junction box without coiling excess. Integrated strain relief at the drive end keeps the connector from working loose under vibration — a common failure point on conveyor and fan drives that get cycled hard. ## What the connector mix means for the panel The drive end uses a printed circuit board connector — that is the standard Altivar fieldbus interface header. The fieldbus side terminates in an RJ45 plug (CANopen physical layer) and the power side in a stripped cable end. That open power lead expects a 24 VDC supply; you land it on a terminal block inside the cabinet. The SUB-D 9 connector is the CANopen network drop. Because the cable is pre-assembled and tested at the factory, there is no field wiring to mess up — just plug the RJ45 into the drive, connect the SUB-D to the network, and terminate the power leads. The strain relief is a molded boot that clamps onto the drive housing; no separate cable gland needed.","metaTitle":"Schneider VW3L2F001R30 CANopen cable kit, 3 m","metaDescription":"Pre-assembled cable kit for Altivar drives with CANopen interface, 3 m length, RJ45 and SUB-D 9 connectors, strain relief. Active production, sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Motor Control Accessories"],"specifications":{"title":"VW3L2F001R30","Category":"US1PC5618289","description":"pre-assembled cable kit for fieldbus interfaces and power supply - CANopen - 3 m","Cable length":"9.8 ft (3 m)","lifecycle_stage":"mature","Electrical connection":"Printed circuit board connector drive 1 connector RJ45 fieldbus Cable end open SUB-D 9 power supply","Nbr. of units in pkg.":"1","Additional information":"With integrated cable entry with strain relief","Communication interface":"CANopen","Product or Component Type":"Pre-assembled cable kits for fieldbus interfaces and power supply","Accessory / Separate Part Type":"Cable","Accessory / separate part category":"Connection accessories","Accessory / separate part destination":"For drives with printed circuit board connectors for power/fieldbus interface"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$129.54","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/d78a9233136e2e9f216ecb0199ba9ad2.pdf","sourceUrl":"https://www.se.com/ie/en/product/VW3L2F001R30/preassembled-cable-kit-for-fieldbus-interfaces-and-power-supply-canopen-3-m/"},"ai":{"faq":[{"question":"What drives does this cable kit fit?","answer":"It is designed for Altivar drives that use a printed circuit board connector for the fieldbus interface and power supply — typically the Altivar 32, 212, and 312 series, though the connector pattern is common across the family."},{"question":"What is the cable length and connector type?","answer":"The cable is 3 m long. One end has an RJ45 plug for CANopen and a stripped power lead; the other end has a SUB-D 9 connector for the fieldbus network and a printed circuit board connector that mates to the drive."},{"question":"Where can I buy VW3L2F001R30 and how is it quoted?","answer":"The VW3L2F001R30 is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/VW3L2F001R30","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/VW3L2F001R30 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}