{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"VW3M1C10R10","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"VW3M1C10R10","canonicalUrl":"https://aoctrl.com/schneider/VW3M1C10R10","factsUrl":"https://aoctrl.com/api/mcp/products/VW3M1C10R10","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Lexium 28 pulse train input cable, 1 m (3.3 ft), SUB-D 50 servo drive side, free end CN1 interface, VW3M1C10R10.","salesMarkdown":"The VW3M1C10R10 is a preassembled pulse train input (PTI) and I/O cordset for the Lexium 28 servo drive family. It runs 1 m (3.3 ft) between the servo drive's SUB-D 50 connector and a free-end CN1 interface on the logic controller side — a straight shot for motion-control wiring on a panel or machine. ## What the connector means for fit The servo drive end terminates in a SUB-D 50 pin connector — that's the standard high-density D-sub found on the Lexium 28's CN1 port, which carries the pulse-train direction and encoder signals. The opposite end is unterminated (free end), so you land the individual conductors on your controller's terminal block or breakout board. No special crimp tool needed on the controller side; just strip and terminate per your PLC or motion controller's wiring diagram.","metaTitle":"Schneider VW3M1C10R10 Lexium 28 Pulse Train Input Cable, 1 m","metaDescription":"Schneider Electric VW3M1C10R10 Lexium 28 pulse train input cable. 1 m (3.3 ft) length. SUB-D 50 connector on servo drive side, free end on CN1 interface. Active product, sourced to","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Motor Control Accessories"],"specifications":{"title":"VW3M1C10R10","Category":"US1PC5118264","description":"LXM28 IO PTI connection cable 1m","Cable length":"3.3 ft (1 m)","lifecycle_stage":"mature","Range of Product":"Lexium 28","Electrical connection":"Connector - SUB-D 50 servo drive side Free end CN1 interface","Nbr. of units in pkg.":"1","Product or Component Type":"Pulse train input cable","Accessory / Separate Part Type":"Preassembled I/O and PTI cordset","Accessory / separate part category":"Connection accessories","Accessory / separate part destination":"Between servo drive and logic controller"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$49.53 – $99.99","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":"https://www.se.com/vn/en/product/VW3M1C10R10/lxm28-io-pti-connection-cable-1m/"},"ai":{"faq":[{"question":"What is the cable length of VW3M1C10R10?","answer":"The cable length is 3.3 ft (1 m)."},{"question":"What connectors does VW3M1C10R10 use?","answer":"A SUB-D 50 connector on the servo drive side, and a free end on the CN1 interface side for direct termination to a logic controller."},{"question":"Where can I buy VW3M1C10R10?","answer":"Sourced and quoted to order against an RFQ through independent distribution channels. Availability and current pricing are confirmed at quote time."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/VW3M1C10R10","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/VW3M1C10R10 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}