{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"VW3M5301R1000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"VW3M5301R1000","canonicalUrl":"https://aoctrl.com/schneider/VW3M5301R1000","factsUrl":"https://aoctrl.com/api/mcp/products/VW3M5301R1000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Lexium VW3M5301R1000 motor power cable, 100 m (328.08 ft), 4 x 1.5 mm² + 2 x 1 mm², for creating power cordsets from servo motor to servo drive.","salesMarkdown":"The Schneider Electric VW3M5301R1000 is a Lexium-series motor power cable, 100 m (328.08 ft) on a single reel, built for creating custom-length power cordsets between a servo motor and its drive. The cable composition is 4 x 1.5 mm² power conductors plus 2 x 1 mm² signal/brake conductors — a common configuration for Lexium BSH, BCH, and similar servo families that route both motor phases and holding-brake or encoder power through the same jacket. ## What the Cable Specs Mean for Fit The 4 x 1.5 mm² power conductors are sized for the continuous current draw of a typical Lexium servo motor up to roughly 7–8 A per phase at 400 VAC (the exact ampacity depends on installation method and ambient temperature — 1.5 mm² copper in a multicore cable with a 40 °C ambient is generally good for 10–12 A per conductor in free air, less when bundled in a cable tray). The 2 x 1 mm² conductors handle the holding-brake coil (typically 24 VDC, 0.5–1 A) or a separate encoder power pair. If your motor brake draws more than 1 A continuous, check the voltage drop over 100 m of 1 mm² copper — at 24 VDC and 1 A, the round-trip drop is roughly 3.5 V, which may leave the brake below its hold-in voltage. ## Deployment Context This cable is intended for permanent wiring between a servo drive (Lexium 32, Lexium 28, or similar) and the mating motor connector. It is not a pre-terminated ready-to-run cable — it is bulk cable for the panel builder or machine builder to cut, strip, and fit with the appropriate circular connectors (typically M23 or M40, depending on the motor frame). The 100 m length suits a production run of multiple machines or a single long cable run where a factory-terminated cable would not reach.","metaTitle":"Schneider VW3M5301R1000 Lexium Power Cable, 100 m, Obsolete","metaDescription":"Schneider VW3M5301R1000 Lexium motor power cable, 100 m (328 ft), 4 x 1.5 mm² + 2 x 1 mm². Obsolete — sourced to order against RFQ via independent channels.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Motor Control Accessories"],"specifications":{"Category":"US1PC5118263","Cable length":"328.08 ft (100 m)","lifecycle_stage":"mature","Range of Product":"Lexium","Cable composition":"4 x 1.5 mm² + 2 x 1 mm²","Device Application":"For creating power cordsets","Nbr. of units in pkg.":"1","Product or Component Type":"Connecting cable","Accessory / Separate Part Type":"Power cable","Accessory / separate part category":"Connection accessories","Accessory / separate part destination":"From servo motor to servo drive"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$417.83 – $960.00","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/c225f4e4031f3933dd289dab27d9574f.pdf","sourceUrl":"https://www.se.com/uk/en/product/VW3M5301R1000/cable-for-creating-power-cord-sets-4-x-1-5-mm²-+-2-x-1-mm²-100-m/","alternativesUrl":"https://aoctrl.com/api/mcp/products/VW3M5301R1000/alternatives.json"},"ai":{"faq":[{"question":"Where can I buy VW3M5301R1000?","answer":"This obsolete cable is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — no stock figure is carried on this listing."},{"question":"What is the cable length and conductor configuration?","answer":"The cable is 100 m (328.08 ft) with a composition of 4 x 1.5 mm² power conductors plus 2 x 1 mm² signal/brake conductors."},{"question":"What is the closest replacement for VW3M5301R1000?","answer":"No official successor order code is published. For a form-fit-function match, search for Lexium power cables with the same conductor count and cross-section (4 x 1.5 mm² + 2 x 1 mm²) and 100 m length — several active order codes exist in the Lexium accessory family."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/VW3M5301R1000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/VW3M5301R1000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}