{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"VW3M8221R1000","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"VW3M8221R1000","canonicalUrl":"https://aoctrl.com/schneider/VW3M8221R1000","factsUrl":"https://aoctrl.com/api/mcp/products/VW3M8221R1000","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric Lexium series, connecting cable, VW3M8221R1000, 328.08 ft (100 m) length, 5 x (2 x 0.25 mm²) + (2 x 0.5 mm²) construction, for SinCos Hiperface encoders.","salesMarkdown":"The VW3M8221R1000 is a Lexium-series connecting cable from Schneider Electric, purpose-built for creating control cordsets for SinCos Hiperface encoders. It runs 100 m (328.08 ft) of cable with a construction of 5 x (2 x 0.25 mm²) signal pairs plus 2 x 0.5 mm² conductors for power or shielding — a common layout for multi-conductor encoder feedback lines in servo drives. This is the cable you'd pull from the servo motor back to the drive cabinet, not a general-purpose sensor cable. Lifecycle status is active — Schneider still lists this as a current-production item. That means no last-time-buy clock ticking; it's a standard catalog line you can specify into a BOM without worrying about a sudden EOL. For a maintenance spares buyer or a panel builder locking in a long-run machine design, that's the key takeaway: this cable is not a phase-out risk. ## What the cable construction means for fit The 5 x (2 x 0.25 mm²) twisted pairs handle the differential signal lines typical of SinCos Hiperface encoders — position, commutation, temperature, plus a pair for data. The separate 2 x 0.5 mm² conductors are sized for the encoder's power supply (typically 7–12 VDC at a few hundred mA) and a shield drain wire. If you're replacing a damaged cordset or building a custom-length harness, the 100 m reel lets you cut exactly what you need, avoiding the waste of pre-terminated cables. The 0.25 mm² pairs are fine for signal integrity over that full 100 m run; voltage drop on the 0.5 mm² power pair stays within spec for the encoder's draw.","metaTitle":"Schneider Electric VW3M8221R1000 Lexium Control Cable, 100 m","metaDescription":"Schneider Electric VW3M8221R1000 Lexium control cable for SinCos Hiperface encoders. 100 m length, 5x(2x0.25 mm²)+(2x0.5 mm²) construction. Active production, available to order ag","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Motor Control Accessories"],"specifications":{"title":"VW3M8221R1000","description":"cable for creating control cord sets for encoders- 5x(2x0.25mm²)+(2x0.5mm²)-100m","Cable length":"328.08 ft (100 m)","lifecycle_stage":"mature","Range of product":"Lexium","Cable composition":"5 x (2 x 0.25 mm²) + (2 x 0.5 mm²)","Device application":"For creating control cordsets for SinCos Hiperface encoders","Product or component type":"Connecting cable","Accessory / separate part type":"Control cable","Accessory / separate part category":"Connection accessories","Accessory / separate part destination":"From servo motor to servo drive"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$870.32","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/a46d2bd1d016e63030850142e7e32ccf.pdf","sourceUrl":"https://www.se.com/ie/en/product/VW3M8221R1000/cable-for-creating-control-cord-sets-for-encoders-5x2x0-25mm²+2x0-5mm²100m/"},"ai":{"faq":[{"question":"Where can I buy VW3M8221R1000?","answer":"This cable is sourced and quoted to order against an RFQ through independent distribution. Availability and current pricing are confirmed at quote time — send the quantity and we'll get you a firm number."},{"question":"What is the cable length and construction of VW3M8221R1000?","answer":"The cable is 328.08 ft (100 m) long, with a construction of 5 x (2 x 0.25 mm²) twisted pairs plus 2 x 0.5 mm² conductors."},{"question":"What is VW3M8221R1000 used for?","answer":"It is a connecting cable for creating control cordsets for SinCos Hiperface encoders, typically run from a servo motor to the servo drive."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/VW3M8221R1000","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/VW3M8221R1000 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}