{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"VW3S8202R50","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"VW3S8202R50","canonicalUrl":"https://aoctrl.com/schneider/VW3S8202R50","factsUrl":"https://aoctrl.com/api/mcp/products/VW3S8202R50","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric VW3S8202R50 connecting cable, shielded, 16.4 ft (5 m), 24-pole Molex SD326 connector one end, cable end open, for pulse/direction signal between SD326 stepper drive and external impulsion generator, 24 V control circuit.","salesMarkdown":"## Cable routing for a stepper drive link The VW3S8202R50 is a shielded connecting cable, 5 m long, purpose-built to carry pulse/direction signals between a Schneider SD326 stepper drive and an external impulse generator. One end terminates in a 24-pole Molex SD326 connector that mates directly to the drive; the other end is open flying leads for wiring into the external generator or controller. The 24 V control circuit voltage on the cable matches the standard logic supply on most stepper drives and PLC outputs, so no level shifting is needed at the generator end. ## Why the shielding matters on this run Pulse/direction signals are edge-triggered — a missed or extra edge from electrical noise causes a position error that accumulates over the move profile. The shielded construction on this cable attenuates coupled noise from nearby motor power cables or VFD output lines. At 5 m, this cable covers the typical distance between a cabinet-mounted drive and a panel-door-mounted impulse generator or remote indexer. Longer runs would need a differential line driver; at this length the single-ended pulse train stays clean if the shield is bonded at the drive end only. ## Sourcing and lifecycle status Classified as a connecting cable under Motor Control Accessories (category US1PC5518286), it ships one unit per package.","metaTitle":"VW3S8202R50 Schneider Cable, 5 m Shielded","metaDescription":"Schneider Electric VW3S8202R50 shielded connecting cable, 16.4 ft (5 m), 24-pole Molex SD326 to flying leads. Active production, quoted to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":"Active","categoryPath":["Motor Control Accessories"],"specifications":{"title":"VW3S8202R50","Category":"US1PC5518286","description":"VW3S8202R50 by SQUARE D","Cable length":"16.4 ft (5 m)","Type of Cable":"Shielded cable","lifecycle_stage":"mature","Electrical connection":"1 connector 24-pole Molex SD326) Cable end open external impulsion generator)","Nbr. of units in pkg.":"1","[Uc] control circuit voltage":"24 V","Accessory / Separate Part Type":"Connecting cable","Accessory / separate part category":"Connection accessories","Accessory / separate part designation":"Cable for pulse/direction signal","Accessory / separate part destination":"Between stepper drive SD326 and external impulsion generator"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$81.28 – $85.75","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/043449a65dc0f70684957569fa4646ff.pdf","sourceUrl":"https://www.se.com/ie/en/product/VW3S8202R50/cable-for-pulse-direction-signal-lexium-sd3-24v-shielded-5m/"},"ai":{"faq":[{"question":"What is the cable length and connector type on VW3S8202R50?","answer":"The cable is 16.4 ft (5 m) long, shielded, with a 24-pole Molex SD326 connector on one end and open flying leads on the other. It is designed for 24 V control circuit pulse/direction signals between an SD326 stepper drive and an external impulse generator."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/VW3S8202R50","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/VW3S8202R50 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}