{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"XCKJ10513D","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"XCKJ10513D","canonicalUrl":"https://aoctrl.com/schneider/XCKJ10513D","factsUrl":"https://aoctrl.com/api/mcp/products/XCKJ10513D","rawCanonicalId":null},"summary":{"shortDescription":"Square D Osiswitch XCKJ10513D heavy duty limit switch, 240 VAC 10 A, SPDT, M12 5-pin connector, IP66, NEMA 4/12, UL/CSA.","salesMarkdown":"The Square D XCKJ10513D is a heavy-duty, non-plug-in limit switch from the Osiswitch family, built for position sensing in wet, dusty, or washdown environments. Its SPDT snap-action contact is rated 240 VAC 10 A and 250 VDC 0.27 A — the AC figure covers most motor-starter and solenoid loads, while the DC rating is low enough that you'll want to verify it handles your inductive DC circuit without welding. The rotary head with steel roller lever gives a 23° pretravel and 90° total travel, with 11° differential; the 33.3 oz-in operating force means it won't trip from vibration but will catch a machine cycle reliably. Enclosure is NEMA 1/2/4/12 and IP66, so it's suitable for indoor and outdoor use where hose-down or high-pressure spray is routine — think food processing, car washes, or aggregate plants. Body is Zamak zinc alloy, which resists corrosion better than painted steel in those settings. Connection is via an M12 5-pin male connector, which simplifies field wiring and replacement: unplug the old head, plug in the new one, no re-termination. The 240 VAC 10 A contact rating is the headline number, but the 250 VDC 0.27 A rating is the one that trips people up. If you're switching a DC solenoid or a small DC motor, that 0.27 A limit is the hard ceiling — DC arcs are harder to extinguish than AC, so don't assume the AC rating scales down. The SPDT configuration gives you both N.O. and N.C. contacts in one housing, which is useful for dual-channel safety circuits or for signaling a PLC while also dropping out a contactor. Operating temperature range is -13 to 158 °F (-25 to 70 °C), so it's fine for unheated outdoor enclosures in most climates. The IP66 and NEMA 4/12 ratings mean it's dust-tight and protected against hose-directed water — that's a step above NEMA 1/2, which only guards against falling dirt and dripping water. If your application sees direct spray from a pressure washer, this switch will hold up.","metaTitle":"Square D XCKJ10513D Heavy Duty Limit Switch, 240VAC 10A, IP6","metaDescription":"Square D XCKJ10513D heavy duty limit switch, 240 VAC 10 A / 250 VDC 0.27 A, SPDT, M12 connector, IP66, NEMA 4/12, UL/CSA. Active lifecycle, sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["Limit Switches"],"specifications":{"UPC":"78590155751","Type":"Heavy Duty, Non-Plug-In","Model":"XCKJ","title":"XCKJ10513D","Approval":"UL, CSA","Category":"Heavy Duty Limit Switches","Enclosure":"NEMA 1/2/4/12, IP66","Pretravel":"23 Deg","Brand Name":"Osiswitch[R]","description":"SQUARE D XCKJ10513D: LIMIT SWITCH 240VAC 10AMP XCKJ +OPTIONS","Sub-Category":"General/Heavy Duty Limit Switch","Total Travel":"90 Deg","UPC 12 Digit":"389110388902","Body Material":"Zamak Zinc Alloy","Contact Rating":"240 VAC 10 Ampere, 250 VDC 0.27 Ampere","Operation Type":"Spring Return, Snap Action","Connection Type":"M12, 5-Pin Male Connector","Operating Force":"33.3 Oz-Inch","lifecycle_stage":"current","Actuator/Head Type":"Rotary Head, Steel Roller Lever","Manufacturer Brand":"Square D Co.","Differential Travel":"11 Deg","Product Description":"Telemecanique XCKJ10513D Limit Switch 240Vac 10Amp Xckj +Options","Contact Configuration":"SPDT","Operating Temperature":"-13 to 158 Deg F","Additional Information":"Applicable Standard EN/IEC 60204-1, EN/IEC 60947-5-1","Full Technical Description":"Heavy Duty, Non-Plug-in Type; SPDT Contact Configuration; M12, 5-Pin Male Connector Connection Type; Spring Return, Snap Action Operation Type; 240 VAC 10 Ampere, 250 VDC 0.27 Ampere Contact Rating; UL, CSA Approval; NEMA 1/2/4/12, IP66 Enclosure; Zamak Zinc Alloy Body Material; -13 to 158 Deg F Operating Temperature; 33.3 oz-Inch Operating Force; 11 Deg Differential Travel; Rotary Head, Steel Roller Lever Actuator/Head Type; 23 Deg Pretravel; 90 Deg Total Travel; Osisense Brand; Applicable Standard En/Iec 60204-1, En/Iec 60947-5-1; XCKJ Model","Proposition 65 Warning (CA)":"WARNING: This product can expose you to chemicals including: Diisononyl phthalate (DINP), which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$33.02","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/114986e6f2c38b5051e7b9e58e07137e.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What are the key ratings of the XCKJ10513D?","answer":"SPDT contact rated 240 VAC 10 A and 250 VDC 0.27 A. Enclosure is NEMA 1/2/4/12 and IP66. Rotary head with steel roller lever, 23° pretravel, 90° total travel, 11° differential. M12 5-pin connector. Operating temperature -13 to 158 °F."},{"question":"What approvals and standards does the XCKJ10513D meet?","answer":"UL and CSA approved. Complies with EN/IEC 60204-1 and EN/IEC 60947-5-1 for machine safety and control circuit applications."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/XCKJ10513D","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/XCKJ10513D when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}