{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"XCKJ110511H7","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"XCKJ110511H7","canonicalUrl":"https://aoctrl.com/schneider/XCKJ110511H7","factsUrl":"https://aoctrl.com/api/mcp/products/XCKJ110511H7","rawCanonicalId":null},"summary":{"shortDescription":"Schneider Electric OsiSense XC XCKJ110511H7 heavy-duty limit switch, rotary head, spring-return roller lever thermoplastic actuator, 1 C/O, 10 A, IP66, NEMA 4/12.","salesMarkdown":"## Rotary head limit switch for position detection in washdown zones The XCKJ110511H7 is a heavy-duty limit switch from the OsiSense XC series, built with a rotary head and a spring-return roller lever actuator. It's the part you spec when a machine position needs to be confirmed in an environment that sees hose-down cleaning — the IP66 and NEMA 4/12 enclosure keeps water jets and dust out of the switching chamber. The 1 C/O (form C) contact configuration is the standard for limit switch feedback — one normally-open and one normally-closed set gives you both a safe-state signal and a position-confirm signal from a single device. ## Electrical ratings — what the AC-15 and DC-13 numbers mean for your load The switch is rated 3 A at 240 V in AC-15 duty (inductive load, typical for contactor coils and solenoid valves) and 0.27 A at 250 V in DC-13 duty (DC inductive load, like brake solenoids or DC relay coils). The AC-15 rating follows IEC 60947-5-1 Appendix A, which defines the make/break capability for pilot-duty loads — it's not a general-purpose resistive rating, so don't use the 10 A thermal current figure for switching motors directly. The 10 A thermal current (Ith) is the continuous current the contacts can carry when closed — it's the wiring and terminal rating, not the switching capacity. For switching duty, stay within the AC-15 or DC-13 envelope. The DC-13 endurance is verified at 5 million cycles at 24 V, 10 W inductive load, which is a realistic life figure for a machine that cycles a few times per minute over several years. ## Mounting and wiring — body-mount with screw-clamp terminals The switch mounts by the body — bolt it directly to the machine frame or a bracket using the 36 mm x 43 mm x 84 mm footprint. The screw-clamp terminals accept one 0.75 mm² to two 1.5 mm² conductors, which covers the standard control wiring gauge for limit switch circuits. The metal plug-in body means the switch head and contact block are replaceable without pulling the whole assembly off the machine — useful when the actuator gets bent but the wiring and mounting stay put. ## Lifecycle and sourcing — still a current-production part Sourced to order against your BOM quantity.","metaTitle":"Schneider Electric XCKJ110511H7 Limit Switch, Rotary Head","metaDescription":"Schneider Electric XCKJ110511H7 heavy-duty limit switch, rotary head with spring-return roller lever. Rated 10 A, IP66, NEMA 4/12. Current production.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["Limit Switches"],"specifications":{"Size":"36 MM,43 MM,84-84 MM","Type":"LIMIT SWITCH,ROTARY HEAD","title":"XCKJ110511H7","Actuator":"SPRING RETURN ROLLER LEVER THERMOPLASTIC","Category":"Heavy Duty Limit Switches","Mounting":"BY THE BODY","Standard":"25 GN 10-500 HZ)IEC 60068-2-6,50 GN 11 MS IEC 60068-2-27,CSA-UL-CCC,IEC 60947-5-1-UL 508-IEC 60204-1-CENELEC EN 50041-EN 60204-1-CSA C22.2 NO 14-EN 60947-5-1,IK07 EN 50102,IP66 IEC 60529","Enclosure":"NEMA 1/2/4/12 IP 66","Sub Brand":"XCKJ","Brand Name":"OSISENSE XC","Connection":"SCREW-CLAMP TERMINALS 1 X 0.75...2 X 1.5 MMA","Application":"INDUSTRIAL","description":"Telemecanique XCKJ110511H7 Limit Switch Assembly|SQUARE D XCKJ110511H7: LIMIT SWITCH ASSEMBLY","UPC 12 Digit":"389118120801","Voltage Rating":"3 A 240 V, AC-15, A300 EN/IEC 60947-5-1 APPENDIX A-0.27 A 250 V, DC-13, Q300 EN/IEC 60947-5-1 APPENDIX A","Amperage Rating":"10 A","lifecycle_stage":"current","Operating Cycles":"5000000 CYCLES, DC-13, INDUCTIVE, 120 V, 4 W 60 CYC/MN 0.5 IEC 60947-5-1 APPENDIX C-5000000 CYCLES, DC-13, INDUCTIVE, 24 V, 10 W 60 CYC/MN 0.5 IEC 60947-5-1 APPENDIX C-5000000 CYCLES, DC-13, INDUCTIVE, 48 V, 7 W 60 CYC/MN 0.5 IEC 60947-5-1 APPENDIX C","Special Features":"METAL,PLUG-IN BODY","Manufacturer Brand":"Square D Co.","Product Description":"Telemecanique XCKJ110511H7 Limit Switch Assembly","Contact Configuration":"1 C/O","Operating Temperature":"-25-70 AC","Closed Contact Resistance":"25 MOHM IEC 60255-7 CATEGORY 3"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$378.00","stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/1d14cd1301ca58e1ed3ce94e3ebf2a7d.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the XCKJ110511H7's IP rating and enclosure type?","answer":"The switch carries an IP66 rating per IEC 60529 and meets NEMA 1/2/4/12 enclosure standards. That means it's dust-tight and protected against powerful water jets — suitable for washdown environments in food processing, car washes, or outdoor installations."},{"question":"What compliance standards does the XCKJ110511H7 meet?","answer":"It is certified to CSA, UL, and CCC standards, and complies with IEC 60947-5-1, UL 508, IEC 60204-1, CENELEC EN 50041, EN 60204-1, and CSA C22.2 No. 14. The vibration resistance is 25 GN at 10-500 Hz (IEC 60068-2-6) and shock resistance is 50 GN at 11 ms (IEC 60068-2-27)."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/XCKJ110511H7","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/XCKJ110511H7 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}