{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"XCKJ161","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"XCKJ161","canonicalUrl":"https://aoctrl.com/schneider/XCKJ161","factsUrl":"https://aoctrl.com/api/mcp/products/XCKJ161","rawCanonicalId":null},"summary":{"shortDescription":"Square D Osiswitch XCKJ161, Heavy Duty Non-Plug-In Limit Switch, SPDT, 240VAC 10A / 250VDC 0.27A, NEMA 1/2/4/12 IP66, Zamak body, Top Rod Plunger.","salesMarkdown":"The Square D XCKJ161 is a heavy-duty limit switch from the Osiswitch line, built for industrial position sensing in wet, dusty, or washdown environments. Its NEMA 1/2/4/12 and IP66 enclosure means it seals out hose-directed water and airborne dust — suitable for food-processing lines, machine tools, and outdoor conveyor systems where a standard limit switch would fail from ingress. Contact rating is 240 VAC 10 Ampere and 250 VDC 0.27 Ampere (SPDT, snap-action). The AC figure governs motor-control circuits and solenoid loads; the DC figure is derated significantly because DC arcs are harder to extinguish — at 250 VDC the switch is limited to 0.27 A, so it will not handle a typical 24 VDC sensor load above that current. For DC control circuits, verify the load current stays under the 0.27 A limit at the applied voltage. The top rod plunger actuator (spring return, snap action) provides a direct mechanical interface for cam- or slide-actuated positions. Pretravel is 0.08 inch, differential travel 0.035 inch, total travel 0.24 inch — the narrow differential means the switch changes state with minimal overtravel, useful for precise position detection on indexing tables or press slides. ## Construction and integration Body is Zamak zinc alloy, corrosion-resistant and dimensionally stable under vibration. Connection is via a PG13.5 cable gland with screw-clamp terminals — the gland accepts standard 1/2-inch trade-size conduit or cable, and the screw clamps handle solid or stranded wire up to about 14 AWG. No plug-in base; wiring is direct to the switch body, so replacement requires rewiring at the terminal block. Operating temperature range is -13 to 158 °F (-25 to 70 °C), covering most indoor and sheltered outdoor installations. The switch carries UL and CSA approval, plus compliance with EN/IEC 60204-1 (machine safety) and EN/IEC 60947-5-1 (control circuit devices). These standards are the baseline for industrial control panels in North America and Europe.","metaTitle":"Square D XCKJ161 Heavy Duty Limit Switch, SPDT, 240VAC 10A,","metaDescription":"Square D XCKJ161 heavy duty limit switch, SPDT, 240VAC 10A / 250VDC 0.27A, NEMA 1/2/4/12 IP66, Zamak body, UL/CSA. Sourced to order against RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":[],"specifications":{"Pretravel":"0.08 Inch","Product Type":"HEAVY DUTY, NON PLUG IN","Total Travel":"0.24 Inch","Operation Type":"Snap Action, Spring Return","Product Status":"Active","Actuator Head Type":"Top Rod Plunger Head","Temp Operating Max":"158 °C","Temp Operating Min":"-13 °C","Differential Travel":"0.035 Inch"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$26.67","priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/93c3416329222b654dd2dc7c74d073cf.pdf","sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/XCKJ161/alternatives.json"},"ai":{"faq":[],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/XCKJ161","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/XCKJ161 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-02T08:15:54.622Z","lastPublished":"2026-09-02T08:15:54.622Z","indexable":true}}