{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"XS7D1A1PBM12","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"XS7D1A1PBM12","canonicalUrl":"https://aoctrl.com/schneider/XS7D1A1PBM12","factsUrl":"https://aoctrl.com/api/mcp/products/XS7D1A1PBM12","rawCanonicalId":null},"summary":{"shortDescription":"Telemecanique XS7 size-D block inductive proximity sensor, 40 mm sensing distance, 12 to 24 VDC, PNP NC, 3-wire, 4-pin micro M12 connector, 100 Hz switching.","salesMarkdown":"The Telemecanique XS7D1A1PBM12 is a size-D block-style inductive proximity sensor in the XS7 family, built in a PBT housing at 80 mm W x 26 mm D x 80 mm H and rated to NEMA 1/4X/12 and IP67. It runs on 12 to 24 VDC, switches a PNP normally-closed output on three wires through a 4-pin micro M12 connector, and indicates state through an on-body LED. Square D / Telemecanique holds the brand; UL, CSA, and CE are the approvals carried on the nameplate. ## What the key ratings decide Sensing distance of 40 mm is the headline reach — long enough for door-state, end-of-stroke, and pallet-presence work on conveyor frames where the target cannot sit flush against the face. The 100 Hz switching frequency is the matching ceiling, so it is suited to static-position detection and slow-rev applications rather than high-count rack-and-pinion or encoder-replacement tasks; the LED on the body makes commissioning and fault isolation a one-person job. Output configuration is PNP normally-closed, 3-wire on a 4-pin micro M12 connector — that matches standard PNP sensor inputs on common PLCs and drive I/O without re-anything on the wiring side. Maximum load current is 100 mA, which is the channel-level ceiling when paralleling outputs; it is not a per-pin figure. Operating voltage spans 12 to 24 VDC and operating temperature spans -13 to 158 deg F, so the sensor tolerates cold-storage cabinets and most warm enclosures near a drive without derating. The IP67 enclosure handles panel-side splash and incidental wash, but the housing is PBT, not stainless, and there is no IP69K rating on this record — for daily high-pressure hot caustic on a dairy line, a stainless IP69K body is the more honest choice. The Telemecanique XS7C1A1PAL01M12 sits in the same family at size C — 40 mm W x 15 mm D x 40 mm H, with a 15 mm sensing range and a 1000 Hz switching frequency on a PNP normally-open output through a 0.1 m pigtail to a 4-pin micro M12 connector. The functional trade-off is reach versus speed and form factor: this seed covers more air-gap but cycles slower, while the size-C body fits tighter mounting with faster response. Output logic also flips — NC here versus NO on the size-C part — so a drop-in swap would require confirming that the downstream input accepts NC at 100 Hz before re-wiring.","metaTitle":"XS7D1A1PBM12 Telemecanique XS7 Inductive Sensor, 40 mm, PNP","metaDescription":"Telemecanique XS7D1A1PBM12 size-D block inductive proximity sensor, 40 mm range, 12-24 VDC, PNP NC, 100 Hz, M12 connector. Specified against your BOM line and quoted on RFQ.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["Proximity Sensors"],"specifications":{"UPC":"78590129342","Size":"80 MM W X 26 MM D X 80 MM H","Model":"XS7","Approval":"UL, CSA, CE","Category":"Inductive Proximity Sensor","Material":"PBT","Enclosure":"NEMA 1/4X/12, IP67","Brand Name":"Telemecanique[R]","Manufacturer":"Square D Co.","Sub-Category":"Block/Rectangular Inductive Proximity Sensor","UPC 12 Digit":"389110140326","Connection Type":"4 PIN MICRO M12 CONNECTOR","Number of Wires":"3","lifecycle_stage":"current","Sensing Distance":"40 MM","Sensing Position":"FRONT","Operating Voltage":"12 TO 24 VDC","Manufacturer Brand":"Square D Co.","Product Description":"Telemecanique XS7D1A1PBM12 Proximity Sensor Sz D Dc Pnp Xs7","Switching Frequency":"100 HZ","Output Configuration":"NC, PNP","Operating Temperature":"-13 TO 158 DEG F","Additional Information":"MAXIMUM LOAD CURRENT 100 MILLIAMPERE; WITH LED INDICATION","Full Technical Description":"Pbt Material; 80 mm W X 26 mm D X 80 mm H Size; 4 Pin Micro M12 Connector Connection Type; 3 Wire(S); UL, CSA, CE Approval; 12 to 24 VDC Operating Voltage; NEMA 1/4X/12, IP67 Enclosure; -13 to 158 Deg F Operating Temperature; NC, PNP Output Configuration; 40 mm Sensing Distance; Front Sensing Position; 100 Hz Switching Frequency; TELEMECANIQUE[R] Brand; Maximum Load Current 100 Milliampere; With LED Indication; XS7 Model","Proposition 65 Warning (CA)":"WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":"$31.75","priceTiers":null},"links":{"datasheetUrl":null,"sourceUrl":null,"alternativesUrl":"https://aoctrl.com/api/mcp/products/XS7D1A1PBM12/alternatives.json"},"ai":{"faq":[{"question":"Will XS7D1A1PBM12 drop into a panel that was specified around XS7C1A1PAL01M12 without rewiring?","answer":"No — the bodies differ (80 x 26 x 80 mm versus 40 x 15 x 40 mm), the output logic flips from NO on the size-C part to NC on the size-D seed, and the connectors differ (direct M12 versus 0.1 m pigtail to M12). Mounting, wiring, and input logic all need re-confirmation before a swap."},{"question":"What are the key ratings on XS7D1A1PBM12?","answer":"40 mm sensing distance, 12 to 24 VDC operating voltage, PNP normally-closed output, 100 Hz switching frequency, 100 mA maximum load current, and operating temperature from -13 to 158 deg F — all on a size-D 80 x 26 x 80 mm PBT block to IP67."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/XS7D1A1PBM12","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/XS7D1A1PBM12 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-09-14T23:41:38.134Z","lastPublished":"2026-09-14T23:41:38.134Z","indexable":true}}