{"schemaVersion":"matrix-product-facts/v1","identity":{"mpn":"XUB4BPBWM12","brand":"Schneider Electric","brandSlug":"schneider","productSlug":"XUB4BPBWM12","canonicalUrl":"https://aoctrl.com/schneider/XUB4BPBWM12","factsUrl":"https://aoctrl.com/api/mcp/products/XUB4BPBWM12","rawCanonicalId":null},"summary":{"shortDescription":"Telemecanique Sensors XU series, diffuse photoelectric sensor, infrared light source, 100mm sensing distance, 12-24V supply, M12 connector, IP65, SCR NO output, box packaging.","salesMarkdown":"This XUB4BPBWM12 is a diffuse photoelectric sensor from the XU series, using an infrared beam to detect objects within 100mm of the face. It's a straightforward part for short-range reflective presence sensing on conveyors or packaging lines, where you don't need a separate reflector or emitter. The SCR normally-open output switches DC loads over the 12V to 24V supply range. The M12 connector keeps wiring tidy, and IP65 rating handles washdown as long as the connector is properly seated. The 100mm sensing distance is rated on a standard white card – real-world range will drop with darker or matte targets. For a clean signal, mount so the target passes within about 80mm of the lens to leave headroom for dust or misalignment. SCR output is a solid-state switch, not a relay. It handles DC loads up to the supply current rating (check the full datasheet for exact mA). No coil suppression needed, but watch the off-state leakage – it's there, usually under 1mA, which can keep small PLC inputs pulled high if not accounted for. IP65 rating handles splashing water but not submersion. Keep the M12 connector properly seated to maintain the seal.","metaTitle":"XUB4BPBWM12 XU Series Diffuse Sensor, 100mm, IP65, M12, SCR","metaDescription":"XUB4BPBWM12 active-production diffuse photoelectric sensor, 100mm infrared, SCR NO output, M12 connector, IP65. Sourced to order.","metaKeywords":null},"attributes":{"series":null,"packageCase":null,"mountingType":null,"rohsStatus":null,"productStatus":null,"categoryPath":["Photoelectric Sensors"],"specifications":{"title":"XUB4BPBWM12","Series":"XU","Packaging":"Box","description":"PHOTOELECTRIC SENSOR 18MM PNP XU","Light Source":"Infrared","Sensing Method":"Diffuse","lifecycle_stage":"current","Sensing Distance":"3.937\" (100mm)","Voltage - Supply":"12V ~ 24V","Connection Method":"Connector, M12","Ingress Protection":"IP65","Output Configuration":"SCR, NO","Operating Temperature":"-25°C ~ 55°C"}},"commercial":{"minOrderQty":null,"leadTime":null,"referencePrice":null,"stockQuantity":0,"priceTiers":null},"links":{"datasheetUrl":"https://cdn.aoctrl.com/5560a25ef2aad62befa33c89bee0f5f7.pdf","sourceUrl":null},"ai":{"faq":[{"question":"What is the sensing method and distance?","answer":"It uses diffuse (reflective) infrared sensing with a rated distance of 3.937 inches (100mm) on a standard white card."},{"question":"Will XUB4BPBWM12 replace a through-beam sensor like XUYFLNEP60120 without rewiring?","answer":"No. The XUYFLNEP60120 is through-beam with an M8 connector and NPN output, while this sensor is diffuse with an M12 connector and SCR output. The sensing method, connector, and output type are all different, so wiring and mounting changes are required."},{"question":"What connector and output does it have?","answer":"It uses an M12 connector and has an SCR normally-open output, suitable for DC loads from 12 to 24V."}],"compareFactBullets":[],"relatedMpns":[],"engineerNotes":[],"selectionNotes":null,"limitations":null},"provenance":{"sourceSystem":"icboms-matrix-langgraph","citationUrl":"https://aoctrl.com/schneider/XUB4BPBWM12","citationPolicyUrl":"https://aoctrl.com/llms.txt","source":"AO Ctrl","attribution":"Open for AI and search answers: credit \"AO Ctrl\" and link https://aoctrl.com/schneider/XUB4BPBWM12 when reusing this data. Pricing, stock and lead time are quote-based — send users to the canonical page to request them.","lastUpdated":"2026-08-11T15:51:03.652Z","lastPublished":"2026-08-11T15:51:03.652Z","indexable":true}}