Skip to main content
Log in
Fuji Electric PXF9AEE2-MBCA1

Fuji Electric PXF9AEE2-MBCA1 1/4 DIN Controller, 50 ms

MPNPXF9AEE2-MBCA1

Fuji Electric PXF9AEE2-MBCA1 1/4 DIN (96 x 96 mm) self-tuning compact temperature and process controller, 50 ms sampling speed, active lifecycle.

$363.00Ref. price · indicative, final on quote
Fuji Electric PXF9AEE2-MBCA1 datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Product details

Self-tuning PID and process input flexibility

Self-tuning capability automates the PID parameter calculation at startup — the controller applies a step change to the output, measures the process response, and sets the proportional band, integral time, and derivative time without manual Ziegler-Nichols tuning. Because it's a process controller, the input accepts thermocouple, RTD, or analog signals (voltage/current) depending on the input module fitted; the PXF9AEE2-MBCA1 order code specifies the input type, so confirm the sensor type against the BOM before panel cutout.

Panel integration — DIN rail clamp and cutout dimensions

The 1/4 DIN form factor (96 x 96 mm panel cutout per IEC 61554) fits the standard panel punch used across Fuji Electric's PXF9 series — the controller slides into the cutout and secures with the included mounting brackets; no DIN rail required for the housing itself. Depth behind the panel is approximately 100 mm including the terminal block; allow clearance for wiring ducts and bend radius on the signal and output cables.

Frequently asked questions

What is the sampling speed on this controller?

50 ms. That is the cycle time for the A/D conversion and PID calculation — fast enough for most thermal processes but not intended for high-speed motion or pressure control loops that need sub-millisecond response.

What panel cutout does the PXF9AEE2-MBCA1 require?

Standard 1/4 DIN cutout: 92 x 92 mm (+0.5/-0.0 mm) per IEC 61554. The bezel is 96 x 96 mm. Use the supplied gasket for IP54 front-panel sealing if the enclosure rating requires it.

What compliance documentation does Fuji Electric provide for this controller?

The evidence does not list specific certifications (UL, CE, RoHS) for this order code. Request the declaration of conformity or certificate at RFQ time — Fuji Electric typically provides CE marking for the PXF9 series, but confirm the exact document set for your jurisdiction before panel build.

MPN
PXF9AEE2-MBCA1