BOM / RFQ

Schneider A9XMEA08 Acti 9 Smartlink SI B Ethernet, 24 V DC, IP20

MPNA9XMEA08

Obsolete

Schneider A9XMEA08 Acti 9 Idpn Vigi — now discontinued. Supplied from remaining channel stock; full specifications, lifecycle and same-series options are below.

$548.51Ref. price · indicative, final on quote

Add to RFQ

Schneider Electric A9XMEA08 datasheet (PDF)

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

A9XMEA08 key specifications
Parameter	Value
Input type	Current for analog input, 4...20 mA Voltage for analog input, 0...10 V DC Current sink for digital input, 24 V DC +/- 20 % at 2.5 mA
Output signal	Logic current V - DC - 100 mA
Protection type	Short-circuit protection for analogue input Against reverse polarity for auxiliary supply Against reverse polarity for input Overvoltage at 33 V DC for digital output
Type of setting	Modbus address 01...247 for address encoders
Application type	Load control Breaker status monitoring Basic energy metering E Improved load monitoring E, U, I, P, Pf
Range of product	Acti9
Input (output type)	2 inputs + 1 output per digital channel 2 inputs per analog channel
Product or component type	Smart communication module
Communication network type	RS485 Modbus RTU master SUB-D 9 9.6...19.2 kbauds Ethernet Modbus TCP/IP server RJ45 10/100 Mbit/s
Maximum voltage drop	<1 V at state 1 digital output
Supply voltage	24 V DC +/- 20 %
Inrush current	0.5 A for digital output 3 A for power supply

All specifications

A9XMEA08 additional specifications
Parameter	Value
Maximum supply current	1.5 A
Maximum permanent current	0.005 A for digital input
IP degree of protection	IP20
Communication service	Ethernet Modbus TCP/IP server Web server
Commissioning interface	Acti 9 Smart test Web page
Mounting position	Horizontal and vertical on DIN rail
Wire stripping length	Control: 10 mm Supply circuit: 7 mm Analog input: 7 mm Communication bus: 7 mm
Location of connection	Front
Connections - terminals	Spring-loaded terminal Ti24 qty: 7 for digital input/output, ordered separately RJ45 connector qty: 1 for ETHERNET, ordered separately Plug-in connector qty: 1 for supply circuit Plug-in connector qty: 1 for communication bus Plug-in connector qty: 1 for analog input
Clamping connection capacity	2 x 0.25 mm² for twisted shielded pairs cable, flexible with cable end for communication bus 2 x 0.25 mm² for twisted shielded pairs cable, flexible without cable end for communication bus 2 x 0.25 mm² for twisted shielded pairs cable, rigid with cable end for communication bus 2 x 0.25 mm² for twisted shielded pairs cable, rigid without cable end for communication bus 2 x 0.25...2 x 1.5 mm² for twisted shielded pairs cable, rigid with cable end for analog input 2 x 0.25...2 x 1.5 mm² for twisted shielded pairs cable, rigid without cable end for analog input 2 x 0.25...2 x 1.5 mm² for twisted shielded pairs cable, flexible with cable end for analog input 2 x 0.25...2 x 1.5 mm² for twisted shielded pairs cable, flexible without cable end for analog input 1 x 0.5...1 x 1.5 mm², flexible with cable end for control 1 x 0.5...1 x 1.5 mm², flexible without cable end for control 1 x 0.5...1 x 1.5 mm², rigid with cable end for control 1 x 0.5...1 x 1.5 mm², rigid without cable end for control 2 x 0.2...2 x 1.5 mm², flexible with cable end for supply circuit 2 x 0.2...2 x 1.5 mm², flexible without cable end for supply circuit 2 x 0.2...2 x 1.5 mm², rigid with cable end for supply circuit 2 x 0.2...2 x 1.5 mm², rigid without cable end for supply circuit
Pollution degree	3
Shock resistance	15 gn for 11 ms conforming to IEC 60068-2-27
Relative humidity	93 % at 40 °C
Operating altitude	0...2000 m
Vibration resistance	1 gn, amplitude = 3.5 mm (f = 5...300 Hz)10 cycles conforming to IEC 60068-2-6
Depth	42 mm
Width	359 mm
Color	White (RAL 9003)
Height	22.5 mm
Product weight	180 g
Reset	Factory reset on front face
Web server	BMS controller compatible Embedded web page
9 mm pitches	0 useful
Web services	Web page
Fire resistance	Other parts: 650 °C ( 30 s ) conforming to IEC 60695-2-10 On connection terminals: 960 °C ( 30 s ) conforming to IEC 60695-2-10
Tropicalisation	2
Local signalling	Communication: 1 LED (yellow) NS (Network Status): 1 LED (green, orange and red) Communication (LK/ACT 10/100): 1 LED (green and yellow) Status: 1 LED (green, orange and red)
Device short name	Smartlink SI B Ethernet
Group of channels	1 group of 7 digital channels 1 group of 1 analog channel
Compatibility code	Acti 9 Smartlink IP
Provided equipment	Set of 1 connector Set of 1 bus connector Set of 1 power supply connector Set of 2 locking clips
Absolute accuracy error	+/- 1 % of full scale for analog input 12 bits
Connectivity to devices	Analog input Digital input and output Pulse output meter
Immunity to microbreaks	10 ms
Application specific i (O)	Pulse totalising counter Pulse converter
Electronic filtering time	2 ms for digital input from state 0 to state 1 2 ms for analog input from state 0 to state 1
Environmental characteristic	Corrosive 3C2 conforming to IEC 60721-3-3 Salt mist 2 conforming to IEC 60068-2-52
Electromagnetic compatibility	Resistance to electrostatic discharge (air discharge), 8 kV, conforming to IEC 61000-4-2 Resistance to electrostatic discharge (contact discharge), 4 kV, conforming to IEC 61000-4-2 Resistance to radiated electromagnetic fields (80 MHz...3 GHz), 10 V/m, conforming to IEC 61000-4-3 Power supply: resistance to fast transient (5...100 kHz), 2 kV, conforming to IEC 61000-4-4 Input/output: resistance to fast transient, 1 kV, conforming to IEC 61000-4-4 Communication bus: resistance to fast transient, 1 kV, conforming to IEC 61000-4-4 Conducted EMC (0.15...80 MHz), 10 V, conforming to IEC 61000-4-6 Immunity to magnetic fields at network frequency, 30 A/m, conforming to IEC 61000-4-8 Radiated emission (30...1000 MHz), class A, conforming to IEC 61131-3 Ed.3 Conducted emission (0.15...30 MHz), class A, conforming to IEC 61131-2
Number max of connected devices	Up to 7 wired devices
Ambient air temperature for storage	-40...80 °C
Ambient air temperature for operation	-25...60 °C

Product details

Overview

The A9XMEA08 is a Schneider Acti 9 Smartlink SI B Ethernet communication interface, order code A9XMEA08, operating at 24 V DC with IP20 protection. It functions as a Modbus TCP/IP server with an embedded web page, providing connectivity between Acti 9 devices and a BMS or PLC. The module accepts one analog input (4-20 mA or 0-10 V) and per digital channel offers two inputs and one output, making it suitable for load control, breaker status monitoring, and basic energy metering.

Integration & connectivity

The Smartlink SI B Ethernet mounts horizontally or vertically on DIN rail and connects to a wide range of Acti 9 devices including iC60, iID, iSW-NA, iDPN Vigi, and iCT auxiliary, as well as PowerLogic pulse output and Modbus meters. The front-facing connectors simplify wiring: a set of power supply, bus, and signal connectors is included. Communication status is indicated by LEDs for network status, link/activity, and module status.

Environmental & mechanical

Rated for shock resistance of 15 gn for 11 ms per IEC 60068-2-27, pollution degree 3, and storage temperature from -40 to 80 °C with 93 % maximum humidity. The module measures 359 mm wide, 42 mm deep, and 22.5 mm high, fitting standard DIN-rail enclosures.