Schneider DA1TS080 Tesys Lt3 — now discontinued, supplied from remaining surplus and broker stock.
| Parameter | Value |
|---|---|
| Product / component type | Thermistor probe |
| Parameter | Value |
|---|---|
| Rated operational voltage (Ue) | <= 2.5 V |
| Parameter | Value |
|---|---|
| Standards | IEC 60034-11 Mark A |
| Parameter | Value |
|---|---|
| Insulation | Reinforced |
| Resistance | 250 Ohm per probe 25 °C |
| Cable length | 1 m between probe and motor terminal plate |
| Quantity per set | Set of 10 |
| Range of product | DA1 |
| Device short name | DA1TS |
| Voltage | 1000 V |
| Accessory (separate part category) | Protection accessory |
| Ambient air temperature for operation | 80 °C |
Compared to the DA1TS070, which trips at 70°C, the DA1TS080 offers a 10°C higher trip point while sharing the same 1.0 m cable, 250 ohm resistance, and 1000 V insulation. Both are surface-mount probes in the DA1TS family; the DA1TS080 is the correct choice when the winding temperature threshold must be 80°C.