Schneider Electric GY4040M5
MPNGY4040M5
Active
Modular dual tariff contactor, TeSys GY, AC-7a, 40A, 4NO, 220 to 240VAC 50Hz coil
$55.30Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Control type | Remote control |
| Control circuit type | AC at 50 Hz |
| Product or component type | Modular dual tariff contactor |
| Coil voltage | 220...240 V AC 50 Hz |
| Voltage | 500 V conforming to IEC 61095 500 V conforming to VDE 0110 |
| Control circuit voltage limits | Drop-out: 0.2...0.75 Uc at 50 Hz (at Operational: 0.85...1.1 Uc at 50 Hz (at <50 °C) |
| [Ue] rated operational voltage | <= 250 V AC |
| [Uimp] rated impulse withstand voltage | 4 kV |
| [Icw] rated short-time withstand current | 320 A 40 °C - 10 s for power circuit 100 A 40 °C - 30 s for power circuit |
| Breaking capacity | 120 A at 400 V for power circuit conforming to IEC 61095 |
| [Ie] rated operational current | 40 A AC-7A 15 A AC-7B |
| [Ith] conventional free air thermal current | 40 A (at 50 °C) for power circuit |
All specifications
| Parameter | Value |
|---|---|
| Inrush power in | 53 VA 50 Hz (at 20 °C) |
| Power dissipation per pole | 3.2 W |
| Power pole contact composition | 4 NO |
| Hold-in power consumption in | 6.5 VA 50 Hz (at 20 °C) |
| Poles description | 4P |
| Utilisation category | AC-7B AC-7A |
| IP degree of protection | IP40 conforming to VDE 0106 (in enclosure) IP20 conforming to VDE 0106 |
| Mounting mode | Clip-on |
| Mounting support | DIN rail |
| Connections - terminals | Control circuit: screw clamp terminals 1 cable(s) 2.5 mm²flexible without cable end Control circuit: screw clamp terminals 2 cable(s) 2.5 mm²flexible without cable end Control circuit: screw clamp terminals 1 cable(s) 2.5 mm²flexible with cable end Control circuit: screw clamp terminals 2 cable(s) 1.5 mm²flexible with cable end Control circuit: screw clamp terminals 1 cable(s) 1.5 mm²solid without cable end Control circuit: screw clamp terminals 2 cable(s) 1.5 mm²solid without cable end Power circuit: screw clamp terminals 1 cable(s) 25 mm²flexible without cable end Power circuit: screw clamp terminals 2 cable(s) 16 mm²flexible without cable end Power circuit: screw clamp terminals 1 cable(s) 16 mm²flexible with cable end Power circuit: screw clamp terminals 2 cable(s) 4 mm²flexible with cable end Power circuit: screw clamp terminals 1 cable(s) 25 mm²solid without cable end Power circuit: screw clamp terminals 2 cable(s) 6 mm²solid without cable end |
| Operating altitude | <= 3000 m |
| Depth | 62.5 mm |
| Width | 54 mm |
| Color | White |
| Height | 85 mm |
| Electrical durability | AC-7A: 100000 cycles AC-7B: 100000 cycles |
| Mechanical durability | 1000000 cycles |
| Standards | IEC 60947-5 IEC 61095 |
| Range | TeSys |
| Operating time | 10...25 ms opening 10...30 ms closing |
| Heat dissipation | 2.1 W at 50/60 Hz |
| Quantity per set | Set of 4 |
| Average impedance | 2 mOhm - Ith 40 A 50 Hz for power circuit |
| Device short name | GY40 |
| Tightening torque | Control circuit: 0.8 N.m - on screw clamp terminals Power circuit: 0.8 N.m - on screw clamp terminals |
| Operating position | 30°/vertical |
| Protective treatment | TC |
| Contactor application | Heating Lighting Motor control |
| Mechanical robustness | Shocks contactor open: 10 Gn for 11 ms Shocks contactor closed: 15 Gn for 11 ms Vibrations contactor open: 2 Gn, 5...300 Hz Vibrations contactor closed: 3 Gn, 5...300 Hz |
| Associated fuse rating | 40 A gL at <= 440 V for power circuit |
| Maximum operating rate | 300 cyc/h 50 °C |
| Irms rated making capacity | 120 A at 400 V AC for power circuit conforming to IEC 61095 |
| Total number of 18 mm modules | 3 |
| Ambient air temperature for storage | -40...70 °C |
| Ambient air temperature for operation | -5...50 °C |
MPN
GY4040M5