Schneider Electric NTSDDI1642
MPNNTSDDI1642
Active
Discrete Input Module, 16 In, 24V DC, Source, 1 Wire, Modicon Edge I/O NTS
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Range of product | Modicon Edge I/O NTS |
| Power supply type | Bus power from power supply bus (24 Vdc) Field power from power supply field (24 Vdc) Optional field power from external power supply (24 Vdc, shared 24 V module) |
| Input protection type | Over voltage protection |
| Product or component type | Discrete input module |
| Discrete input voltage | 24 V DC |
| Voltage state 0 guaranteed | < 5 V DC |
| Voltage state 1 guaranteed | 11...30 V DC |
| Rated operational voltage limits | 20.4...28.8 V DC |
| Discrete input current | 2.5 mA |
| Current state 0 guaranteed | <= 1.5 mA |
| Current state 1 guaranteed | >= 2 mA |
| Typical current consumption | 43.2 mA 24 V DC on the Bus current 2.4 mA 24 V DC on the internal field current minimum 2.9 mA 24 V DC on the internal field current maximum |
All specifications
| Parameter | Value |
|---|---|
| Power dissipation in | 2.05 W maximum at 24 V DC |
| IP degree of protection | IP20 |
| Mounting support | base |
| Response time on input | < 125 µs (off to on) < 125 µs (on to off) |
| Pollution degree | 2 |
| Shock resistance | 15 g 11 ms with and without accessory) |
| Relative humidity | 5...95 % without condensation |
| Operating altitude | 0...6561.68 ft (0...2000 m) without derating 2000...5000 m with derating |
| Vibration resistance | 1 g without accessory 2 g with accessory |
| Depth | 2.7 in (69 mm) |
| Width | 0.6 in (15 mm) |
| Height | 3.9 in (100 mm) |
| Housing colour | Grey |
| Product weight | 0.106 lb(US) (0.048 kg) |
| Standards | EN/IEC 61131-2 EN 61010-2-201 UL 61010-2-201 IACS E10 EN/IEC 61000-6-5, interface type 1 and type 2 EN/IEC 61850-3, location G EN/IEC 60079-0 EN 50155 EN 50121-4 EN 50121-5 |
| Marking | CE UKCA CULus RCM |
| Category | US1PC3318214 |
| Directives | 2014/30/EU - electromagnetic compatibility 2014/34/EU - ATEX directive 2014/35/EU |
| Operating mode | Synchronous/Isochronous |
| Input filtering | 0...20 ms configurable in 0.1 ms step |
| Input impedance | 9.6 kOhm |
| Input diagnostic | Power supply error per channel Sensor power supply error per channel |
| Local signalling | 1 LED (green) for module operating (RUN) 1 LED per channel (green) for channel diagnostic 1 LED (red) for module error (ERR) |
| Input wiring mode | 1 wire |
| Device application | Industrial Application |
| Mandatory accessory | NTSXBA0100H base NTSXTB18_0_H terminal block |
| Discrete input logic | Negative logic (source) |
| Discrete input number | 16 |
| Hot swapping fallback | Yes |
| Paralleling of inputs | Yes |
| Group of input channels | 1 group |
| Discrete input compatibility | 16 type 3 conforming to IEC 61131-2 |
| Environmental characteristic | Gas resistant C3 and G2 |
| Isolation between channels and bus | 1500 V AC |
| Ambient air temperature for storage | -40...185 °F (-40...85 °C) |
| Ambient air temperature for operation | -4...140 °F (-20...60 °C) |
| Isolation between channels and ground | 1500 V AC |
MPN
NTSDDI1642