Schneider Electric NTSEHC0220K
MPNNTSEHC0220K
Active
High Speed Counter Module + Base, 2 Incremental In, 24V DC, 250kHz, 4 In, 8 Out, Modicon Edge I/O NTS
$850.94Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Protection type | Short-circuit protection on output Input over voltage protection |
| Range of product | Modicon Edge I/O NTS |
| Product or component type | Counter module kit |
| Output voltage | 24 V DC |
| DC supply voltage | 24 V |
| Output voltage limits | 28.8 V DC |
| Discrete input voltage | 24 V DC |
| Voltage state 0 guaranteed | 0...5 V DC |
| Voltage state 1 guaranteed | 11...30 V DC |
| Discrete input current | 2.27 mA at 24 V |
| Nominal output current | 0.5 A |
| Current state 0 guaranteed | <= 1.5 mA |
All specifications
| Parameter | Value |
|---|---|
| Current state 1 guaranteed | >= 2 mA |
| Typical current consumption | 55 mA 24 V DC on the Bus current 3 mA 24 V DC on the internal field current maximum for inputs 500 mA 24 V DC on the internal field current maximum for outputs |
| Power dissipation in | 2.4 W maximum filament lamp |
| Maximum counting frequency | 250 kHz |
| IP degree of protection | IP20 |
| Mounting support | Top hat type TH35-15 rail IEC 60715 Top hat type TH35-7.5 rail IEC 60715 |
| Pollution degree | 2 |
| Shock resistance | 15 g 11 ms with and without accessory) |
| Relative humidity | 5...95 % without condensation |
| Operating altitude | 0...6561.68 ft (0...2000 m) without derating 2000 m...5000 m with derating |
| Vibration resistance | 1 g without accessory 2 g with accessory |
| Depth | 3.1 in (80 mm) |
| Width | 1.2 in (30 mm) |
| Height | 3.9 in (100 mm) |
| Housing colour | Grey |
| Standards | EN/IEC 61131-2 EN/IEC 61010-2-201 UL 61010-2-201 IACS E10 EN/IEC 61000-6-5, interface type 1 and type 2 EN/IEC 60079-0, location G EN 50155 EN 50121-4 EN 50121-5 |
| Marking | CE UKCA CULus RCM |
| Category | US1PC3318214 |
| Directives | 2014/35/EU - directive basse tension 2014/30/EU - electromagnetic compatibility 2014/34/EU - ATEX directive |
| Input filtering | 0 µs Anti Bounce filter configurable 0.5 µs Anti Bounce filter configurable 1 µs Anti Bounce filter configurable 2 µs Anti Bounce filter configurable 5 µs Anti Bounce filter configurable 10 µs Anti Bounce filter configurable 50 µs Anti Bounce filter configurable 100 µs Anti Bounce filter configurable 250 µs Anti Bounce filter configurable 500 µs Anti Bounce filter configurable 1 ms Anti Bounce filter configurable 2 ms Anti Bounce filter configurable 4 ms Anti Bounce filter configurable 12 ms Anti Bounce filter configurable |
| Kit composition | NTSEHC0220 module NTSXBA0200H base |
| Local signalling | 1 LED (green) for module operating (RUN) 1 LED per channel (green) for channel diagnostic 1 LED (red) for module error (ERR) |
| Counter functions | 2 HSC Channel for pulses counting Supports 12 Simple counting functions 2 Single counting function 2 Dual counting function 2 Frequency meter 2 Ratio meter 2 Period meter 2 PWM output |
| Device application | Industrial Application |
| Mandatory accessory | NTSXTB18_0_H terminal block |
| Discrete input logic | Sink or source |
| Counter configuration | Modicon configuration software |
| Discrete input number | 12 |
| Discrete output logic | Source(push-pull) |
| Hot swapping fallback | Yes |
| Discrete output number | 8 |
| Isolation between group | 850 V AC |
| Isolation between channels and bus | 1500 V AC |
| Ambient air temperature for storage | -40...185 °F (-40...85 °C) |
| Ambient air temperature for operation | -4...140 °F (-20...60 °C) derating of channel numbers above 55 °C to 12 channels for 24 vdc at 60 °C |
MPN
NTSEHC0220K