Skip to main content
Schneider Electric RXG21ED

Schneider Electric RXG21ED

MPNRXG21ED
Obsolete

Interface plug-in relay, 5 A, 2 CO, lockable test button, 48 V DC

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

RXG21ED key specifications
ParameterValue
Series nameInterface relay
Control typeLockable test button
Range of productHarmony Relay
Product or component typePlug-in relay
Contacts type and composition2 C/O
Maximum switching voltage250 V AC 30 V DC
Drop-out voltage threshold>= 0.1 Uc DC
Voltage250 V IEC 300 V CSA 300 V UL
[Uimp] rated impulse withstand voltage1200 V AC between contacts with micro disconnection 6000 V between coil and contact with reinforced insulation 1500 V between terminals and case with basic insulation
Load current5 A 250 V AC
[Ie] rated operational current10 A at 30 V (DC) conforming to UL 10 A at 30 V (DC) conforming to IEC 10 A at 250 V (AC) conforming to UL 10 A at 250 V (AC) conforming to IEC
[Ithe] conventional enclosed thermal current5 A -40...131 °F (-40...55 °C)

All specifications

RXG21ED additional specifications
ParameterValue
IP degree of protectionIP40
Mounting positionAny position
Pollution degree2
Relative humidity10...85 %
Vibration resistance3 gn +/- 0.75 mm 10...150 Hz)in operation 5 gn +/- 0.75 mm 10...150 Hz)not in operation
Colour of coverStandard
Contacts materialSilver alloy (AgSnO2In2O3)
Electrical durability100000 cycles NO resistive at 55 °C 100000 cycles NC resistive at 55 °C
Mechanical durability10000000 cycles
StandardsCSA C22.2 No 14 IEC 61810-1 UL 508
Category21127-ZELIO ICE CUBE RELAYS
Reset time20 ms
Status LEDWithout
Test levelsLevel A group mounting
Torque value7.08 lbf.in (0.8 N.m)
Operating rate<= 18000 cycles/hour no-load
Operating time20 ms
Local signallingFlag
Device short nameRXG
Average resistance4400 Ohm at 73 °F (23 °C) +/- 10 %
Contact resistance100 mOhm
Device presentationComplete product
Dielectric strength1000 V AC between contacts with micro disconnection 5000 V AC between coil and contact with reinforced insulation 3000 V AC between poles with basic insulation
Protection categoryRT I
Overvoltage categoryIII
Insulation resistance1000 MOhm at 500 V DC
Safety reliability dataB10d = 100000
Utilisation coefficient20 %
Maximum switching capacity1250 VA
Minimum switching capacity50 mW at 10 mA, 5 V DC
Electrical insulation classClass F
Ambient air temperature for storage-40...185 °F (-40...85 °C)
Ambient air temperature for operation-40...158 °F (-40...70 °C)
MPN
RXG21ED