Schneider Electric SSP1A175BDE
MPNSSP1A175BDE
Active
solid state relay, Easy Harmony Solid State Relays, input 5 to 24V DC, output 24 to 240V AC, 75A, Zero cross switching
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026
Specifications
| Parameter | Value |
|---|---|
| Control type | Electronic controller |
| Range of product | Easy Harmony Solid State Relays |
| Solid state output type | SCR output |
| Contacts type and conifguration | 1 NO |
| Input voltage | 5...24 V DC |
| Maximum voltage drop | <1.6 V on-state |
| Control input voltage | 4...32 V DC |
| Maximum switching voltage | 2 V DC turn-off |
| Minimum switching voltage | 4 V DC turn-on |
| [Uimp] rated impulse withstand voltage | 8 kV output to case 6 kV input to output |
| Load current | 1...75 A |
| Surge current | 750 A 1/2 Cycle |
All specifications
| Parameter | Value |
|---|---|
| Line rated current | 75 A |
| Maximum leakage current | 1 mA off-state |
| Power factor | 0.8 (with maximum load) |
| Phases | 1 phase |
| IP degree of protection | IP10 |
| Mounting support | Panel |
| Connections - terminals | Screw terminals 0.2...3.3 mm², AWG 24...AWG 12) with cable end Screw terminals 0.5...5.26 mm², AWG 20...AWG 10) with cable end Screw terminals 0.2...3.3 mm², AWG 24...AWG 12) without cable end Screw terminals 0.5...8.26 mm², AWG 20...AWG 8) without cable end Forked type tag connectors 9.2 x 4 mm Ring lugs 9.2 x 4 mm Forked type tag connectors 11.7 x 4.5 mm Ring lugs 11.7 x 4.5 mm |
| Response time | 0.5 cycle (turn-on) |
| Pollution degree | 2 |
| Depth | 1.1 in (29 mm) |
| Width | 2.3 in (59 mm) |
| Height | 1.8 in (45 mm) |
| Standards | UL 508 EN/IEC 60947-4-3 EN/IEC 62314 CSA C22.2 No 14 |
| DV (dt) | 500 V/µs off-state at maximum voltage |
| Marking | UL CE UKCA TÜV |
| Category | US10CP222375 |
| LED indicator | LED, green input |
| Device short name | SSP1E |
| Tightening torque | 1.5...1.7 N.m for input 2...2.4 N.m for output |
| Provided accessory | Thermal pad |
| Device presentation | Complete product |
| Dielectric strength | 3.8 kV AC for input/output 2 kV AC for output connection |
| Overvoltage category | III |
| Insulation resistance | 500 MOhm at 500 V DC |
| Output switching mode | Zero voltage switching |
| Transient overvoltage | 530 V |
| Maximum i2t for fusing | 2500 A².s for 10 ms at 50 Hz |
| Ambient air temperature for storage | -22...212 °F (-30...100 °C) |
| Ambient air temperature for operation | -22...176 °F (-30...80 °C) |
MPN
SSP1A175BDE