The VW3E1149R010 is a 1 m shielded hybrid cable from the PacDrive 3 range, purpose-built to connect a Lexium 62 ILM distribution box (D1 connector, elbowed) to distribution boxes or ILM integrated drives (D0 connector, straight). It carries both power and feedback for the integrated drive-motor units — one cable, no separate encoder line to route.
The 1 m length is short — sized for a panel-to-machine junction or a tight cabinet-to-drive run where you don't want a service loop. The full shielding on the motor cable keeps EMI off the feedback pair, which matters when the drive is switching IGBTs at several kHz right next to the cable path. The D1 elbow connector saves bend radius at the distribution box face; the D0 straight connector is what the ILM drive expects. If your machine uses a different connector family (M23, M40, SpeedTec), this won't pin-fit — it's specific to the PacDrive 3 / Lexium 62 ILM ecosystem.