The Schneider Electric VW3L10100N10 is a cable entry accessory for the Lexium integrated drive family, designed to route and protect signal and power supply cables entering the drive enclosure. Each kit contains two inserts, each with five protective cable sleeves, for a total of ten cable entries per set. The sleeves accommodate cable outer diameters from 3 to 9 mm, covering the typical range for motor power and encoder feedback cables on Lexium integrated drives.
What the cable diameter range means for fit
The 3–9 mm cable diameter range on each sleeve is the critical fit parameter. A motor power cable for a Lexium integrated drive typically falls in the 6–8 mm range; an encoder or brake cable runs smaller, around 4–5 mm. If your cable jacket measures outside this window, the sleeve won't seal properly, and the IP rating of the drive assembly could be compromised. Verify your cable O.D. before committing the BOM line.
Deployment context
These cable entry inserts mount directly into the cable gland openings on Lexium integrated drive housings. No special tooling is required; the sleeves are pushed into the insert and the insert snaps into the drive's cable entry plate. The assembly maintains the drive's sealed enclosure rating — suitable for panel-mount installations where dust and splash ingress must be controlled.